1. 46xxH323_111405.zip Driver
2. 4602_02SWSIPreadme_R1_1.txt File Contents

4602_02SWSIPreadme_R1_1.txt Driver File Contents (46xxH323_111405.zip)

Copyright Avaya 2004
All rights reserved

This file is the Readme for SIP software Release 1.1 for the Avaya 4602 and 4602SW 
SIP Telephone.

There are six files that apply when converting a 4602 & 4602SW from a H.323 to a 
SIP Phone (Note: The 4602 and 4602SW are shipped from the factory with H.323 
Software) See the 4602 SIP Telephone Release 1.0 Administrator's Guide for 
additional details.

sip_4602bt1_1.ebin - The 4602/02SW SIP boot file, loaded on HTTP server.
sip_4602ap1_1.ebin - The 4602 SIP application file, loaded on HTTP server.
sip_4602D01A.txt - 4602 SIP Configuration file, loaded on HTTP server.
sip_4602D02A.txt - 4602SW SIP Configuration file, loaded on HTTP server.
323tosip1_1.bin - H.323 to SIP conversion boot file, loaded on TFTP server.
46xxupgrade.scr - The script the IP Telephones will download while running 
H.323 software. This script may require customization for the user's 
environment - See 4602SIP Administration Guide for details.

There are two files that apply when converting a 4602 & 4602SW from a 
SIP to a H.323 Phone. See the 4602 SIP Telephone Release 1.1 Administrator's 
Guide for additional details.

sipto323_1_1.ebin - SIP to H.323 conversion boot file, loaded on HTTP server
46xxupgrade.scr - The script the IP Telephones will download while running 
H.323 software. This script may require customization for the users 
environment - see 4602SIP Administration Guide for details. Loaded on 
TFTP server.

NEW FEATURES IN 4602 & 4602SW (Note: English only):
R1.1 contains the following new feature:
.	Phone operation verified on Avaya SIP Solution with the phone 
	Optim administered
.	Call Log - Time and date stamp provided

(Note: English only).
KNOWN ISSUES in R1.1 (configured using Avaya's CCS and Avaya Communications 
Manager with the 4602SIP configured configured as Off-PBX-telephone using 
OPS application and the 4602SIP Phone).

NOTE: 	The 4602SIP phone hotlined with the Avaya SIP Solution
	is NO longer supported.

.	For the 4602SIP phone to operate properly with the Avaya SIP solution 
	use the following

		Avaya CM 2.1.1 (414.1- SWUD 7545 or higher)
		CCS2.1
		Cruiser/Prowler FW V93.

.	An HTTP server is required for installing and upgrading SIP software
	
.	Using option 172 with Lucent QIP DHCP server causes problems for the 
	4620SW and 4610SW IP Phones. Your 4620SW and 4610SW IP Phone must be 
	running R2.0.1 to avoid this problem.

.	To use G729 or G729A with Avaya Communication Manager, you must administer 
	the G.729 and G.729B or (G.729AB) as supported codecs on Communication 
	Manager. 

.	On outgoing calls, only called number is displayed.

.	Cannot change the http server IP address from the phone admin web page if 
	DHCP is enabled. Must be set via DHCP option 172 or other configured DHCP 
	SSON option number.	

.	Displayed outgoing call log is not updated unless the browser is 
	refreshed manually.
	
.	The state of the 2nd Ethernet port (port 1) is not properly reported 
	under status. 

.  	Can only set VLAN via the dial pad or configuration file. Not through DHCP.

.	Since the ConfigHttpSrvr parameter must be an IP address (versus a URL), 
	this means that only one config file can be used to pass parameters to the 
	phone. This also implies that only one VlanId can be passed to the phones 
	unless multiple HTTP servers are used.  Therefore if more than one VLAN Id
	is used at a site, they must be configured manually on the phone, or 
	additional HTTP servers are needed.

.	This release does not support Silence suppression. 

.	During download filename display may be inconsistent and unreadable. 

.	When converting from SIP to H323, configuration information is not
	preserved. Once the H.323 code is loaded, the phone must be configured 
	for the desired	H.323 configuration addressing.

.	Default password for user web page based on last 4 digits of phone's MAC
 	address must be lower case.

.	The maximum length of the user web page password is 17 characters.

.	International Tones are not supported (such as dialtone).

.	With the Avaya SIP solution, call forwarding via the 4602SIP is not 
	supported. Call Forwarding should be done via the OTPIM feature.

.	Under certain unusual conditions, if the line appearance icon shows an 
	active call, but there is no voice path, press the line appearance 
	button of the active call to get the voice path to return.

.	When converting from SIP to H.323, the TFTP server must have H.323 
	software version R1.82 or greater.


See the 4602 SIP Telephone Release 1.1 Administrator's Guide (document no. 16-300037) for more information 
on installing and configuring your 4602 AND 4602SW SIP Telephone at:  www.avaya.com/support

For details on phone features of your 4602 and 4602SW SIP Telephone,see the 4602 SIP 
Telephone Release 1.1 User's Guide (document no. 16-300035) at: www.avaya.com/support