******************************
WARNING MESSAGE
******************************
The files will upgrade the firmware of your Cable/DSL
Router to version R1.94o8avTIG.
1. NOTE! DO NOT POWER OFF THE UNIT WHEN THE UNIT IS BEING
UPGRADED, OR THE UNIT MAY BE DAMAGED.
2. The configuration will not be changed. You need not
configure it again.
******************************
CHANGE HISTORY
******************************
***R1.94o8a (05/04/12)
1.Add MPPE Encryption Mode
2.Add no-ip DDNS provider
3.Add NAT Disable
***R1.94o3 (04/11/24)
1.Solve the problem of MAC Address control can't be saved.
*** R1.94o2 (04/11/15)
1. Add SSID broadcast Enable/Disable option.
2. Increase Special AP rule to 15.
3. Change MAC control rule to 16 rules per page.
4. TurboTCP(Ackpriortization).
*** R1.94n51 (04/09/07)
First Release.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.