There are no jumpers to set, nor are there any registry settings to set, nor are there any settings to set in Control Panel for our card to be set it in EPP mode.
Many devices do not see our EPP mode. This can be because of many reasons.
1) Our card can only do 8 bit transfers. Many devices need 16 or 32 bit transfers. IEEE 1284 EPP does not require the port to have 16 or 32 transfers for it to be EPP
2) Since our card is PCI, its interrupt is level triggered. ISA based parallel ports are edge triggered. Many devices are looking are for our interrupt on the rising edge. The way interrupts are triggered on PCI cards cannot be changed.
This may be why they cannot see our EPP mode.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.