Lava Configuration Utility This utility can be run from a DOS boot disk to report the IO address range and IRQ that the PCI bus on your system has confiigured our card to. Use this utility if you wish to configure a Parallel port in an OS other than DOS, Win3.11, Win95/98, or NT4.0. For example SCO UNIX, Linux... i.e. using the makedev parallel command. Consult the Man Pages or Documentation for the OS for the appropriate commands. Create a DOS boot disk in DOS compatible system (not NT4.0) with the following command: format a: /s Copy this Lavaconf.exe to that diskette. Restart the machine that you wish to install the Lava PCI Card in and boot from that boot disk you created. Run the Lavaconf.exe If this reports an address that ends with 0 then the ending address will end in 7. If this reports an address that ends with 8 then the ending address will end in F. i.e. Lavaconf reports: 10F0 then in the OS put 10F0-10F7 for the Input Output Range. i.e. Lavaconf reports: 10F8 then in the OS put 10F8-10FF for the Input Output Range. Lava Computer MFG Inc. 5:22 PM 7/25/00Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.