1. MapTableGuides.zip Driver
2. ReadMeDoubleByte.txt File Contents

ReadMeDoubleByte.txt Driver File Contents (MapTableGuides.zip)

Intermec Printers AB Double Byte conversion.
Date: April 05, 2005 Copyright Intermec Printers AB - 2005

It is possible to create your own map table or modify and an existing. The map tables works for  both FP7.xx and FP8.xx software platform.
Enclosed map tables are  map tables that comes together with a font, purchased from Intermec Printer AB.

How to do:
To make a change or create a Double byte map table two programs are necessary ncd22ascii.exe and ascii2ncd2.exe Only a normal editor can not be use to change the map table because the *.ncd is in a certain compressed format.

Unzip the file that contains the two programs.
Start Command prompt at PC-side.
Select one of the sample file that are enclosed e.g. BIG5.NCD.
Edit: ncd22asii BIG5.NCD myfile.txt
Press Enter,
Now it is possible to open myfile.txt by an editor (e.g. Notepad) and change the values.
From the top of the file all are in hex values:
0xA143 0x3002
0xA144 0xFF0E
0xA145 0x2022
0xA146 0xFF1B
0xA147 0xFF1A
....

Left column is ascii value for the double byte. E.g. A1 (dec 161) is the first byte and 43 (dec 67) is the second byte. (to print the character is done by PRTXT chr$(161)+chr$(67)
Right column is Unicode value

After change the myfile.txt must be compressed to a *.NCD file by ascii2ncd2.exe.
Download the *.NCD file to printer and use FONTD and NASCD command.

For further details Unicode numbers etc. see Font Reference Manual.
If you need a specific map table that is not included here in these samples, ask Intermec Printer Support.