************************************************************
** ENG *****************************************************
************************************************************
*
* Intel(R) Chipset Software Installation Utility
* Installation Readme
*
* NOTE: This document refers to systems
* containing the following Intel chipsets:
* Intel(R) 810 Chipset
* Intel(R) 810E Chipset
* Intel(R) 815 Chipset
* Intel(R) 815E Chipset
* Intel(R) 815EM Chipset
* Intel(R) 820 Chipset
* Intel(R) 820E Chipset
* Intel(R) 840 Chipset
* Intel(R) 430TX PCIset
* Intel(R) 440BX AGPset
* Intel(R) 440DX AGPset
* Intel(R) 440EX AGPset
* Intel(R) 440GX AGPset
* Intel(R) 440LX AGPset
* Intel(R) 440MX Chipset
* Intel(R) 440ZX AGPset
* Intel(R) 850 Chipset
* Intel(R) Celeron(TM) Processor Chipset
*
*
************************************************************
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. Overview
2. System Requirements
3. Installing the Software
3A. Installing the Software in Interactive Mode
3B. Installing the Software in Silent Mode
3C. List of Available Command Line Flag Options
4. Verifying Installation of the Software
5. Contents of the Distribution Package
6. Identifying the Software Version Number
7. Troubleshooting
************************************************************
* 1. OVERVIEW
************************************************************
The Intel(R) Chipset Software Installation Utility
installs to the target system the Windows* INF files,
which outline to the operating system how the
chipset components will be configured. This is
needed for the proper functioning of the following
features:
- Core PCI and ISAPNP Services
- AGP Support
- IDE/ATA33/ATA66 Storage Support
- USB Support
- Identification of Intel Chipset Components in
Device Manager
************************************************************
* 2. SYSTEM REQUIREMENTS
************************************************************
1. The software included with this distribution
package is designed to operate with the
following chipset configurations:
Intel(R) 810 Chipset
Intel(R) 810E Chipset
Intel(R) 815 Chipset
Intel(R) 815E Chipset
Intel(R) 815EM Chipset
Intel(R) 820 Chipset
Intel(R) 820E Chipset
Intel(R) 840 Chipset
Intel(R) 430TX PCIset
Intel(R) 440BX AGPset
Intel(R) 440DX AGPset
Intel(R) 440EX AGPset
Intel(R) 440GX AGPset
Intel(R) 440LX AGPset
Intel(R) 440MX Chipset
Intel(R) 440ZX AGPset
Intel(R) 850 Chipset
Intel(R) Celeron(TM) Processor Chipset
2. One of the following operating systems ("OS")
must be installed on the system:
Windows 95 4.00.950 (Original release)
Windows 95 4.00.950a (OSR1)
Windows 95 4.00.950b (OSR2 without USB
Supplement)
Windows 95 4.00.950b (OSR2.1 with USB
Supplement)
Windows 95 4.00.950c (OSR2.5 with or
without USB Supplement)
Windows 98 4.10.1998 (Original release)
Windows 98 Second Edition
4.10.2222 (Original release)
Windows ME 4.90.3000 (Original release)
Windows 2000 5.00.2195 (Original release)
To verify which operating system has been
installed on the target system, follow the steps
below:
a. Click on Start.
b. Select Settings.
c. Select Control Panel.
d. Double-click on the System icon.
e. Click on the General system properties tab.
f. Verify which OS has been installed by reading
the System information.
3. The software should be installed on systems
with at least 32 MB of system memory.
4. There should be sufficient hard disc space in
the <TEMP> directory (typically
C:\WINDOWS\TEMP) of the system on
which this software is installed.
Please check with your system provider to
determine which operating system and Intel
chipset are used in your system.
************************************************************
* 3. INSTALLING THE SOFTWARE
************************************************************
This software may be installed in two modes:
Interactive or Silent. The Interactive Mode
requires user input during installation; the Silent
Mode does not.
In addition, this software offers a set of command
line flag options which enable extended
installation functionality. The command line flags
are not case-sensitive. See Section 3C for detailed
descriptions of these flags.
Important Note:
The Intel(R) Chipset Software Installation Utility is
distributed in two formats -- self extracting .EXE
files (INFINST_xxx.EXE) or compressed .ZIP files
(INFINST_xxx.ZIP).
Depending on which distribution format is being
executed, the command-line syntax may differ.
See Section 3C for more details.
************************************************************
* 3A. INSTALLING THE SOFTWARE IN
* INTERACTIVE MODE
************************************************************
1. Check the System Requirements. The
operating system must be fully installed and
running on the system before running this
software.
2. Close any running applications. Otherwise, you
may experience difficulties.
3. Run the InstallShield* installation program:
Self-extracting .EXE distribution:
INFINST_AUTOL.EXE
Compressed .ZIP distribution :
SETUP.EXE
4. You will be prompted to agree to the licence
agreement. If you do not agree, the Installer
will exit before extracting any files.
5. Follow the on-screen instructions and use the
default settings to complete the set-up, once
the operating system has rebooted.
6. This completes the installation of the Intel(R)
Chipset Software Installation Utility.
************************************************************
* 3B. INSTALLING THE SOFTWARE IN SILENT
* MODE
************************************************************
1. Check the System Requirements. The
operating system must be fully installed and
running on the system before running this
software.
2. Close any running applications. Otherwise, you
may experience difficulties.
3. Run the InstallShield installation program:
For silent install with auto-reboot:
Self-extracting .EXE distribution:
INFINST_AUTOL.EXE -a -b -s
Compressed .ZIP distribution :
SETUP.EXE -b -s
- OR -
For silent install without auto-reboot:
Self-extracting .EXE distribution:
INFINST_AUTOL.EXE -a -s
Compressed .ZIP distribution :
SETUP.EXE -s
4. The utility will perform the necessary updates
and record the installation status in the
following system registry key:
HKEY_LOCAL_MACHINE\Software\Intel
\INFInst
5. If the utility was invoked with the "-b" flag, the
system will automatically reboot if the update
was successful.
NOTE: The system MUST be rebooted for all
device updates to take effect.
6. To determine whether the install was
successful, verify the 'install' value in the registry
key specified during installation in Step 5.
The following table describes the various
parameter values:
Value Type Data Description
--------- ------- -------- ------------------
"install" String "success" The installation was
successful.
"fail" The installation was
not successful.
No INF files were
copied to the system.
"reboot" String "Yes" A reboot is required
to complete
the installation.
"No" No reboot is
required to complete
the installation.
"version" String <varies> Current version
number of the
Intel(R) Chipset
Software
Installation Utility
************************************************************
* 3C. LIST OF AVAILABLE COMMAND LINE
* FLAG OPTIONS
************************************************************
The Intel(R) Chipset Software Installation Utility
supports several command line flags for various
installation options.
All command line flags and parameters must be
separated by a space, except for the language
code after the '-L' flag.
Due to the different distribution formats available
for the Intel(R) Chipset Software Installation Utility,
the command line flag syntax may vary:
1. Self-Extracting .EXE Distribution:
When installing this software using the .EXE
distribution, an extra '-A' must be appended to
the INFINST_AUTOL.EXE program call (i.e.
INFINST_AUTOL.EXE -A) in order to
successfully pass command line parameters.
The extra '-A' flag for the self-extracting .EXE
package is DIFFERENT from the '-A'
command line flag option described below.
Example: To extract INF files using the '-A' flag
described below, the installation program
should be invoked as follows:
INFINST_AUTOL.EXE -A -A (optional -P)
2. Compressed .ZIP Distribution:
When installing this software using the .ZIP
distribution, there is no need to append any
extra flags to the SETUP.EXE program call in
order to pass command line flags.
Example: To extract INF files using the '-A' flag
described below, the installation program
should be invoked as follows:
SETUP.EXE -A (optional -P)
Below is a list of all the available command line
flags that may be used with the program call.
Note that the '-L' and the '-S' flags MUST be
specified at the end of the command line
flag list.
Flag Description
------- ------------------
-? Help flag. Displays the list of available
command line flags. This parameter
works in the Interactive mode only.
-A Extracts INF files, README.TXT,
and instructions for
OEM preload (PRELOAD.TXT) to either
"C:\Program Files\Intel\InfInst" or the
<Installation Path> directory specified
using the '-P' flag. The software will
NOT install these INF files to the system.
This flag can be combined only with the
'-P' flag option.
All other options will be ignored if the '-A'
flag is specified.
This parameter works in either Silent
mode or Interactive mode.
-B Automatically reboots the system after
installation.
This flag is ignored if '-A' flag is specified.
This parameter works in either Silent
mode or Interactive mode.
-L<LangCode> Forces the InstallShield user
interface to display the specified
language during set-up.
Note that there should be NO spaces
between '-L' and the 4-digit language
code (see below). This flag and the '-S'
flag must be placed at the end of the
command line flag list. This parameter
works in Interactive mode only.
-P <Installation Path>
Specifies the HDD location to which the
INF program files are copied. If this flag
is not specified at the command line, the
<Installation Path> directory is by default
assumed to be:
C:\Program Files\Intel\INFInst
If this flag is used without the
'-A' option, only README.TXT
will be copied to
<Installation Path>. The directory name
can include spaces. In this case,
however, a pair of double quotes (")
must enclose the directory name. This
parameter works in either Silent mode or
Interactive mode.
-S Runs the Installer in silent mode. No
user interface is displayed. This flag
and the '-L' flag must be placed at the
end of the command line flag list.
Below are the language codes used with the '-L'
flag:
Language <LangCode>
----------------- -------------------
Chinese (PRC) 0804
Chinese (Taiwan) 0404
Danish 0006
Dutch 0013
English (UK - International) 0809
English (US) 0409
Finnish 000B
French (Canadian) 0C0C
French (Standard) 040C
German 0007
Italian 0010
Japanese 0011
Korean 0012
Norwegian 0014
Polish 0015
Portuguese (Brazilian) 0416
Portuguese (Standard) 0816
Russian 0019
Spanish 000A
Swedish 001D
Thai 001E
************************************************************
* 4. VERIFYING INSTALLATION OF THE
* SOFTWARE
************************************************************
Run Device Manager to verify the correct
installation and usage of the INF files.
For Windows 95, Windows 98 and Windows 98
Second Edition, Windows ME:
1. Click on Start.
2. Select Settings.
3. Select Control Panel.
4. Double-click on System icon.
5. Click on Device Manager tab.
6. Click on View Devices by Connection button.
7. Click on Plug and Play BIOS, or
Advanced Configuration and Power Interface
(ACPI) BIOS.
8. Click on PCI bus.
For Windows 2000:
1. Click on Start.
2. Select Settings.
3. Select Control Panel.
4. Double-click on System icon.
5. Click on Hardware tab.
6. Click on Device Manager button.
7. From the View menu, select menu item
Devices by connection.
8. Click on Standard PC, or
Advanced Configuration and Power Interface
(ACPI) PC.
9. Click on PCI bus.
After the Device Manager is launched as
described above, check the descriptions for the
following entries:
*** NOTE: Device Manager will display only the
names of devices currently detected in
the system.
Intel(R) 810 Chipset:
Intel(R) 82810 System and Graphics
Controller
-or-
Intel(R) 82810 DC-100 System and Graphics
Controller
Intel(R) 810E Chipset:
Intel(R) 82810E DC-133 System and
Graphics Controller
Intel(R) 820 Chipset, Intel(R) 820E Chipset:
Intel(R) 82820 Processor to I/O Controller
Intel(R) 82820 Processor to AGP Controller
Intel(R) 840 Chipset:
Intel(R) 82840 Processor to I/O Controller
Intel(R) 82840 Processor to AGP Controller
Intel(R) 82840 PCI Bridge
Intel(R) 82806AA PCI 64-bit Hub:
Intel(R) 82806AA Advanced Programmable
Interrupt Controller
Intel(R) 82806AA PCI Bridge
Intel(R) 82806AA Controller (reserved)
Intel(R) 82801AA I/O Controller Hub (ICH):
Intel(R) 82801AA LPC Interface Controller
Intel(R) 82801AA Ultra ATA Controller
Intel(R) 82801AA USB Universal Host
Controller
Intel(R) 82801AA SMBus Controller
Intel(R) 82801AA PCI Bridge
Intel(R) 82801AB I/O Controller Hub (ICH0):
Intel(R) 82801AB LPC Interface Controller
Intel(R) 82801AB Ultra ATA Controller
Intel(R) 82801AB USB Universal Host
Controller
Intel(R) 82801AB SMBus Controller
Intel(R) 82801AB PCI Bridge
Intel(R) 82371AB PCI to ISA/IDE Xcelerator
(PIIX4):
Intel(R) 82371AB PCI to ISA bridge
(EIO mode)
Intel(R) 82371AB PCI to ISA bridge
(ISA mode)
Intel(R) 82371AB Power Management
Controller
Intel(R) 82371AB/EB/MB PCI Bus Master
IDE Controller
Intel(R) 82371AB/EB/MB PCI to USB
Universal Host Controller
Intel(R) 82371EB/MB PCI to ISA/IDE
Xcelerator (PIIX4):
Intel(R) 82371EB/MB PCI to ISA bridge
(EIO mode)
Intel(R) 82371EB/MB PCI to ISA bridge
(ISA mode)
Intel(R) 82371EB/MB Power Management
Controller
Intel(R) 82371AB/EB/MB PCI Bus Master
IDE Controller
Intel(R) 82371AB/EB/MB PCI to USB
Universal Host Controller
Intel(R) 82371SB PCI to ISA/IDE Xcelerator
(PIIX3):
Intel(R) 82371SB PCI to ISA bridge
Intel(R) 82371SB PCI Bus Master IDE
Controller
Intel(R) 82371SB PCI to USB Universal Host
Controller
Intel(R) 440MX Chipset:
Intel(R) 82440MX Processor to I/O Controller
Intel(R) 82440MX PCI to ISA Bridge
Intel(R) 82440MX Power Management
Controller
Intel(R) 82440MX Bus Master IDE Controller
Intel(R) 82440MX USB Universal Host
Controller
Intel(R) 430TX PCIset:
Intel(R) 82443TX Processor to PCI bridge
Intel(R) 440BX AGPset, Intel(R) 440DX AGPset,
Intel(R) 440ZX AGPset:
Intel(R) 82443BX/ZX/DX Processor to PCI
bridge
Intel(R) 82443BX/ZX/DX Processor to AGP
controller
Intel(R) 440GX AGPset:
Intel(R) 82443GX Processor to PCI bridge
Intel(R) 82443GX Processor to AGP controller
Intel(R) 440LX AGPset:
Intel(R) 82443LX Processor to PCI bridge
Intel(R) 82443LX Processor to AGP controller
Intel(R) 815 Chipset, Intel(R) 815E Chipset, Intel(R)
815EM Chipset:
Intel(R) 82815 Processor to I/O Controller
- 1130
Intel(R) 82815 Processor to AGP Controller
- 1131
Intel(R) 82801BA I/O Controller Hub:
Intel(R) 82801BA LPC Interface Controller
- 2440
Intel(R) 82801BA PCI Bridge - 244E
Intel(R) 82801BA Ultra ATA Storage
Controller - 244B
Intel(R) 82801BA/BAM SMBus Controller -
2443
Intel(R) 82801BA/BAM USB Universal Host
Controller - 2442
Intel(R) 82801BA/BAM USB Universal Host
Controller - 2444
Intel(R) 82801BA/BAM AC '97 Audio
Controller - 2445
Intel(R) 82801BAM I/O Controller Hub:
Intel(R) 82801BAM LPC Interface Controller
- 244C
Intel(R) 82801BAM PCI Bridge - 2448
Intel(R) 82801BAM Ultra ATA Storage
Controller - 244A
Intel(R) 82801BA/BAM SMBus Controller -
2443
Intel(R) 82801BA/BAM USB Universal Host
Controller - 2442
Intel(R) 82801BA/BAM USB Universal Host
Controller - 2444
Intel(R) 82801BA/BAM AC '97 Audio
Controller - 2445
Intel(R) 850 Chipset:
Intel(R) 82850 Processor to I/O Controller - 2530
Intel(R) 82850 Processor to AGP Controller - 2532
Intel(R) Celeron(TM) Processor Chipset:
Intel(R) Celeron(TM) Processor to I/O
Controller - 1A10
Intel(R) Celeron(TM) Processor to I/O
Controller - 1A11
10. On certain systems, the following device may
also be updated:
a. Click on View Devices by Connection button.
b. Click on Plug & Play BIOS, or
Advanced Configuration and Power Interface
(ACPI) BIOS.
c. Verify that the following entry is present:
Intel(R) 82802 Firmware Hub Device -OR-
Intel(R) Security Driver
************************************************************
* 5. CONTENTS OF THE DISTRIBUTION
* PACKAGE
************************************************************
The Intel(R) Chipset Software Installation Utility
package contains the following items:
File(s)
-------
INFINST_AUTOL.EXE -or-
INFINST_AUTOL.ZIP
README.TXT
The version of the software included in the
distribution package is specified in the file
RELNOTES.TXT.
RELNOTES.TXT is available in English only.
After installation on a Windows 95, Windows 98, WIndows ME or
Windows 2000 system, one or more of the following INF files
are copied to the <Windows>\INF directory:
File(s)
-------
440MXCOR.INF
440MXIDE.INF
440MXUSB.INF
810.INF
810B.INF
820.INF
820B.INF
840.INF
850.INF
ICH2AUD.INF
ICH2CORE.INF
ICH2IDE.INF
ICH2SMB.INF
ICH2USB.INF
ICHx.INF
ICHxIDE.INF
ICHxSMB.INF
ICHxUSB.INF
IFWH.INF
IHOST.INF
P64H.INF
P64HRES.INF
PIIXXIDE.INF
PIIXXUSB.INF
PIIX4.INF
815.INF
ICH2CORM.INF
ICH2IDEM.INF
CPHOSTA.INF
*** NOTE: Only the files that reference the
currently detected devices are copied to
the system.
If the -A option is exercised, the files are
not copied to the <Windows>\INF
directory.
See Section 3C for more information.
One or more of the following digital signature files
are installed to the <Windows>\CATROOT
directory on a Windows 98, Windows ME or Windows 2000 system
ONLY:
File(s)
-------
440MXCOR.CAT
440MXIDE.CAT
440MXUSB.CAT
810.CAT
820.CAT
820B.CAT
840.CAT
850.CAT
ICHx.CAT
ICHxIDE.CAT
ICHxSMB.CAT
ICHxUSB.CAT
IFWH.CAT
P64H.CAT
P64HRES.CAT
815.CAT
ICH2AUD.CAT
ICH2CORE.CAT
ICH2IDE.CAT
ICH2USB.CAT
ICH2SMB.CAT
CPHOSTA.CAT
ICH2CORM.CAT
ICH2IDEM.CAT
CPHOSTA.CAT
*** NOTE: Only the files that reference the
currently detected devices are copied to
the system.
If the -A option is exercised, the files are
not copied to the <Windows>\CATROOT
directory.
See Section 3C for more information.
************************************************************
* 6. IDENTIFYING THE SOFTWARE VERSION
* NUMBER
************************************************************
The version of the software included in the
distribution package is specified in the file
RELNOTES.TXT.
RELNOTES.TXT is available in English only.
The version of the software included in the
distribution package can also be identified by
examining the following registry location:
Key name:
\\HKEY_LOCAL_MACHINE\Software\Intel\InfInst
Value name: version
************************************************************
* 7. TROUBLESHOOTING
************************************************************
It is assumed that the system requirements in
Section 2 above have been satisfied.
Issue: System locks up during Device Manager
Remove or during restart.
Solution: System lockup can occur during Restart
as a result of several possible system
issues. In the event of system lockup,
restart the machine and view Device
Manager. If devices are listed properly
and the system experiences no further
problems, then the .INF file restore process
was successful. If devices are not
configured correctly, try re-running the
procedures outlined in Section 3.
If this does not fix problems or further
problems are experienced, reinstall the
operating system.
Issue: After running the set-up program and
rebooting the machine, Windows reports
that it cannot find one of the following files:
ESDI_506.pdr
Solution: Click Browse in the dialogue box where
this problem occurs, locate the
<Windows>\System\IOSubsys
directory and click OK. The system should
be able to locate this file in this directory
and continue re-enumerating for the new
devices.
Issue: After running the set-up program and
rebooting the machine, Windows reports
that it cannot find one of the following files:
UHCD.SYS
USBD.SYS
USBHUB.SYS
Solution: Click Browse in the dialogue box where
this problem occurs, locate the
<Windows>\System32\drivers
(for Windows 98, Windows ME)
-or-
<Windows>\System
(for Windows 95)
directory, and click OK. The system should
be able to locate this file in this directory
and continue re-enumerating for the new
devices.
Issue: During set-up, installation stops and
prompts for one of the following files:
UHCD.SYS
USBD.SYS
USBHUB.SYS
Solution: Ensure that the Windows 95 USB
Supplement has been installed prior to
running the Intel(R) Chipset Software
Installation Utility set-up program.
Issue: After running the set-up program and
rebooting the machine, Windows reports
that it cannot find the following file:
isapnp.vxd
Solution: Click Browse in the dialogue box where
this problem occurs, locate the
<Windows>\System
directory, and click OK. The system should
be able to locate this file in this directory
and continue re-enumerating for the new
devices.
Issue: After performing the silent install, the
HKLM\Software\Intel\InfInst key was
not created or the data of the value
"install" is not "success".
Solution: This is caused by one of the following
scenarios:
- The current system does not contain
a supported operating system, or
- The current system does not contain
a supported chipset.
Verify the System Requirements in
Section 2.
************************************************************
************************************************************
* DISCLAIMER
************************************************************
Intel is making no claims of usability, efficacy or
warranty.
The INTEL SOFTWARE LICENCE AGREEMENT
(OEM / IHV / ISV Distribution & Single User)
completely defines the licensed use of this software.
************************************************************
Information in this document is provided in
connection with Intel products. No licence,
express or implied, by estoppel or otherwise, to
any intellectual property rights is granted by this
document. Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty
relating to sale and/or use of Intel products,
including liability or warranties relating to fitness for
a particular purpose, merchantability or
infringement of any patent, copyright or other
intellectual property right. Intel products are not
intended for use in medical, life-saving, or
life-sustaining applications.
************************************************************
Intel Corporation disclaims all warranties and
liabilities for the use of this document and the
information contained herein, and assumes no
responsibility for any errors which may appear in
this document, nor does Intel make a commitment
to update the information contained herein. Intel
reserves the right to make changes to this
document at any time, without notice.
************************************************************
************************************************************
* Third-party brands and names are the property of
their respective owners.
Copyright (c) Intel Corporation, 1997-2000
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.