Autoexec.bat needs to have the line A:\net\EN190 /irq:10 /iop:300 Modified to suit the IRQ and IO that the Dirver reports on loading. The Enabler and Driver must report the same IRQ and IO address. See the results of the FSTPCM.DOS driver load. Once this has been determined, the protocol.ini needs to be modified to suit. ie. [IBM$FSTPCM] DriverName=FSTPCM$ iobase=0x300 interrupt=10 connectiontype=S100FD Note: The FSTPCM driver reports IRQ values in HEX, so "0A" is "10" in the EN190 card enabler load statement, and in Protocol.ini Note2: The ping utility has been removed to enable the files to fit a standard 1.44 M Disk.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.