Windows 98
Introduction:
-------------
This document describes the procedure to install Windows 98
driver for Fast Ethernet Fiber CardBus adapter.
Location of Driver: \DC21X4.SYS
\NETPCI.INF
Installing driver procedure on Microsoft Windows 98 :
-----------------------------------------------------
Executing Windows 98, it will auto-detect your system configuration
then find the adapter hardware .
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the Fast Ethernet CardBus Fiber driver diskette into drive A
and specify the driver pathname A:\ .
3. Windows 98 will display some message to insert Windows 98 system
diskette to complete setup step.
4. Windows 98 will finish the other installation procedure
automatically, and then please restart the system.
Note:
===============================================================
A. Fast Ethernet CardBus Fiber adapter supports 100Mbps speed only,
you may select 100 Full-duplex or Half-duplex mode configuration
for connection type. The default is 100 Full-duplex mode.
B. Invalid connection type would not work in network connection.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.