NW5X.TXT Driver File Contents (ge1164sc.zip)

Introduction
============

This document presents information to users about National Semiconductor's 
DP83820 Gigabit Ethernet adapter and the relevant NETWARE software driver 
version 1.00j for NetWare operating system version 5.x.

Installation and Configuration
==============================

The following subsections describe the procedure for installing the driver
for NETWARE.

NETWARE Driver Installation
---------------------------

Follow this sequence for installation under NETWARE.

1.Install the NIC into a PCI slot of a NetWare server and note the slot 
  number for driver configuration later (slots are generally numbered 
  top/front to bottom/back of the machine). It is recommended that NetWare 
  5.1 with Support Pack 1 or later be installed. To install the driver,copy 
  the DP83820T.LAN & DP83820T.LDI files onto a floppy disk.

2.Load NWConfig.nlm and follow the 'Driver Options->Configure Network 
  drivers->Select a driver' options on the UI. Follow on-screen directions 
  to point to the drivers installed on floppy (A:\NETWARE). Put the slot
  number and the number of Tx,and Rx Descriptors as required.

3.Alternately, driver can be loaded from the command line (e.g.
  load A:\NETWARE\DP83820T.LAN)& passing the required parameters. This will 
  also display the available slot options for the NIC.

4.The DP83820T.LAN may also be configured at OS install time and can be 
  used in conjunction with the auto-detect feature on NetWare Install.

5.The different options for speed and duplex mode can be configured using 
  NWConfig at installation time or Inetcfg later.
  
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 0.54