README.TXT Driver File Contents (

                       FE-1000TX ODI 4.X SERVER DRIVER


SMC9000.LAN         v3.22   Novell Netware 4.1x

Driver configurable options


May be set by including the following in the command line

Port = xxx                      ;wher xxx can be 300, 320, 340, 360

Be sure the board is set to the same IO address, otherwise the driver
won't find the board. To change the board's IO address use the NETSETUP.EXE
setup utility from DOS.


May be set by including the following in the command line

Int = x                         ;where x can be 2, 3, 10, 11

Defaults to SCEC's EEPROM configuration if not present


The board has got a unique IEEE address. However it may be overwritten by
including the following in the command line:

Node = xxxxxxxxxxxx

Where xxxxxxxxxxxx is a 12 digit hex Number (non multicast or broadcast)
Defaults to board's IEEE unique address if not present


May be set by including the following in the command line

Frame = <type>

Defaults to ETHERNET_802.2 if not present.


The user may select which media type the SCEC will be working with.
This option is specified via parameter passing in the command line.
The keyword is "MEDIA_TYPE=" . The value following the keyword must be one
of the following:

"AUTO"     for automatic selection.
"10BASET"  for 10BaseT.
"MII"      for MII. (FEAST only. Use this option for 100 Mbps)

If the MEDIA_TYPE keyword is not present the driver will use the adapter's
EEPROM default.


This file is created with the install.nlm utility loaded from the
server console, "load install".

file server name BIGKAHOONAS
ipx internal net 10
load c:\smc9000 PORT=300 INT=2 MEDIA_TYPE=10BASET
bind ipx to smc9000 net=1
mount all

Alternatively, by using the Driver Options in the Install mani menu
this procedure can be done automatically by install going through
a set of menues.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.55