******************************************* Operational Notes on ODI Server 3.11 Driver ******************************************* Supports FE-1000TX 10/100 Ethernet ISA adapter. DRIVER VERSION | SIZE | DATE | TIME ------------------------------------------------------------------------------ REV 2.01, ODI server 3.11 driver: smc9000.lan | 13483 | 931011 | 2:38p Driver STANDARD configurable options are: ========================================= IO BASE ------- May be set by including the following in the command line Port = xxx ;wher xxx can be 300, 320, 340, 360 Be sure the board is set to the same IO address, otherwise the driver won't find the board and the message "Hardware Error - SMC9000 Bank Select port failed to respond." will appear. INTERRUPT NUMBER ---------------- May be set by including the following in the command line Int = x ;where x can be 2, 3, 10, 11 Defaults to SCEC's EEPROM configuration if not present NODE ADDRESS ------------ The board has got a unique IEEE address. However it may be overwritten by including the following in the command line: Node = xxxxxxxxxxxx Where xxxxxxxxxxxx is a 12 digit hex Number (non multicast or broadcast) Defaults to board's IEEE unique address if not present FRAME TYPE ---------- May be set by including the following in the command line Frame = <type> where <type> is ETHERNET_802.3, ETHERNET_802.2, ETHERNET_II, ETHERNET_SNAP Defaults to ETHERNET_802.3 if not present. MEDIA TYPE SELECTION -------------------- The user may select which media type the SCEC will be working with. This option is specified via parameter passing in the command line. The keyword is "MEDIA_TYPE=" . The value following the keyword must be one of the following: "AUTO" for automatic selection. "10BASET" for 10BaseT. If the MEDIA_TYPE keyword is not present the driver will use the adapter's EEPROM default. AUTOEXEC.NCF EXAMPLE -------------------- (This file is created with the install.nlm utility loaded from the server console, "load ...\install") file server name BIGKAHOONAS ipx internal net 10 load c:\smc9000 PORT=300 INT=2 AVAILABLE_MEM_SIZE=32 MEDIA_TYPE=10BASET bind ipx to scecfs net=1 mount all Typing SERVER at the DOS prompt will load the server and our driver. Be sure smc9000.lan is in the c:\directoryDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.