The files provided for the NetWare client are listed as below:
README.TXT ;----A file of description about this FE-1000TX
client driver installation.
FE1000T.COM ;----DOS ODI LAN driver for NetWare client.
FE1000T.INS ;----Installation information file for client driver.
FOR A WORKSTATION
-----------------
DOS ODI LAN DRIVER INSTALLATION
To install the FE-1000TX DOS ODI LAN driver on workstations in the
NetWare client environment, the following steps should be performed:
(a) Assume that you have installed NetWare for DOS workstation by using
NetWare client installation program.
A directory is created for the DOS workstation files according to the
target directory specified during installation and ensure that the
workstation files are copied to this specified directory.(Default
is C:\NWCLIENT.)
(b) Copy the file FE1000T.COM under this \NETWARE\CLIENT subdirectory
to the specified directory in (1). (Default is C:\NWCLIENT)
(c) Create or modify DOS and NetWare configuration files.
The previous version of CONFIG.SYS and AUTOEXEC.BAT are
automatically saved as CONFIG.BNW and AUTOEXEC.BNW. If no previous
versions existed, new files are created for you.
For CONFIG.SYS :
Add the line "LASTDRIVE=Z" to your workstation's CONFIG.SYS file.
For AUTOEXEC.BAT :
The line "@CALL drive:\target_directory\STARTNET" and "SET NWLANGUAGE
=language" are added to your workstation's AUTOEXEC.BAT file.
The installation program creates a file called STARTNET.BAT in the
target directory you specified. It contains the following commands:
@echo off
drive:
cd \target directory
LSL
FE1000T
IPXODI
VLM
cd \
The installation program creates a new NET.CFG file to set a
configuration for the network board installed in your workstation.
e.g., it contains the following settings:
Link Driver FE1000T
PORT 300
INT 3
frame ethernet_802.2
MEDIA_TYPE AUTO
NetWare DOS Requester
FIRST NETWORK DRIVE = F
NETWARE PROTOCOL = NDS BIND
LARGE INTERNET PACKETS = ON
; MESSAGE LEVEL = 3
Be sure to indent the second line and place a carriage return
after the second line.
NOTE:
If you wish to use the 802.3 frame type (default is 802.2),you
would replace <FRAME name> with the following line in your
workstation NET.CFG file to match the server's frame type:
FRAME ETHERNET_802.3
(d) Log in to the network with the AUTOEXEC.BAT file.
** NOTE : Please refer to the NetWare Client relevant workstations manual
for more DOS ODI workstations information.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.