; protocol.ini entries for the FE-1000TX. ; The driver name varies depending on how many adapters are installed ; in the system. The first adapter is always referenced through ; SMC9X$. For example, the second adapter's driver name is ; SMC9X2$, the ninth adapter's drivername is SMC9X9$. More than ; nine adapters are not supported. This is a common naming convention ; among NDIS drivers. For example, the PROTOCOL.INI entry should look ; like this ; DriverName = "SMC9X$" ; The possible interrupts 9, 3, 10, and 11. The default is the value ; specified in the FE-1000TX EEPROM. ; Interrupt = 9 ; The I/O base address must match the value set in the FE-1000TX EEPROM. ; This entry must be in the PROTOCOL.INI. IOBase = 0x300 ; Media type of the attached network. Possible values are 10BaseT ; ,MII and AUTO. The default is the type specified in the FE-1000TX ; EEPROM. ; Transceiver = "MII" ; The ethernet address to which the card will respond may be overridden. ; The new value is specified as a string of hex digits separated by dashes. ; The default is the value specified in the FE-1000TX EEPROM. ; NetworkAddress = "02-00-00-00-00-01" ; The amount of queueing space in the driver to process transmit requests ; may be specified. Values are in the range 1 to 40. The default is 1. MaxTransmits = 1 ; The normal interface presented by the FE-1000TX is 16 bits wide. For ; situations where an 8 bit interface is required, this interface ; may be forced via the Disable16 keyword. Note that this option has ; no effect if the card itself is jumpered for 16 bit operation. ; Disable16Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.