Release Notes v.13.3.1.0 : (Based on Philips driver v1.3.3.1) ======================== What changed in the driver? -------------------------------- v.13.3.0.9 -> v.13.3.1.0 #. Tuning Tiger-S LNA issue and added Registry Entry "TDA8275A_LNA_LVLLow_TV". (2005.12.20) v.13.3.0.8 -> v.13.3.0.9 #. BugFix closed-caption issue and Tiger-S MCE flickering and jumping issue for HP. (2005.12.15) #. BugFix PCM Scanned Channel always Locked issue. (2005.11.28) #. BugFix ±¶§J PAL_BG_DK issue. (2005.12.01) v.13.3.0.6 -> v.13.3.0.8 #. BugFix white-screen issue under MCE system. (2005.11.23) #. BugFix, In Franch OS, launch AMCap will cause system hang up after resume back from S1/S3 mode on HP Dolphin. (2005.11.23) #. BugFix, TV render no audio after resume back from S1/S3 mode on HP KOALA. (2005.11.23) v.13.3.0.5 -> v.13.3.0.6 #. Added Registry Entry "IfDisableAudioFilter" to control Disable_Audio_Capture_Filter. (2005.10.26) "IfDisableAudioFilter" == "1", then Disable Audio Capture Filter. "IfDisableAudioFilter" == "0", Do NOT Disable Audio Capture Filter. v1.3.2.18 -> v.13.3.0.5 (Based on Philips driver v1.3.3.0) #. BugFix get the locked but no TV standard (like Black & White) on Dophin v1.3.2.29. #. Added TigerLNA BoardID 0x4871 and set "SmallXBar" registry entry to "0" for support (Tuner, Composite1, S-Video1, composite2, S-Video2) analog input sources. #. BugFix Closed-Caption issue that make system hang. (2005.09.29) #. Added "Pll_Xtal32_ACNI_32KHz" registry entry to bugFix Mercur/Europa2 boards audio/video out of sync. issue. (2005.09.18) #. Added "ImproveNCS" registry entry to improves the "Neighbour Channel Suppression" on the FMD1216 tuner. (2005.09.16) v1.3.2.14 -> v1.3.2.18 #. Bugfix Media Center DVB-T S3/S4 issue. (2005.08.18) v1.3.2.12 -> v1.3.2.14 #. Bugfix scheduled-recordings resume no_tv_signal issue. (2005.08.02) #. Updated TvRatings.dll for Europa2. (2005.08.01) v1.3.2.9 -> v1.3.2.12 (2005.07.29) #. Bugfix resume time too long issue. (2005.07.27) #. Bugfix resume from analog to digital have no channel-scanned issue. (2005.07.27) v1.3.2.7 -> v1.3.2.9 #. Fixed HCT chkinf Failed issue while inf while registering PhilTvRat.dll and Macrovision.dll. (2005.07.21) #. Fixed HCT "Blue Screen Issue" caused by "GetContextStructure" function. (2005.07.20) v1.3.2.6 -> v1.3.2.7 #. Added "macrovision.dll" and "philtvrat.dll" to Inf file. (2005.07.13) #. Added IgnoreDVBParameter value in Inf file. (2005.07.13) for (under MCE, IgnoreDVBParameter=1, prevents the driver to use the DShow DVB properties.) #. the video output error issue ( Image is shifted to right and out off window) (2005.06.20) #. BugFix Europa2 board Secam-L channel scan issue in MCE. #. Modified Europa2 board Secam-L callback routine cancellation. #. BugFix Europa2 board PAL B/G and PAL D/K audio delay from S3 to S0 issue v1.3.2.5 -> v1.3.2.6 #. BugFix Europa2 board Secam-L issue #. Modified TV7133ATSC analog TV and ATSC switch issue #. Set the Parameters/IfMacrovision registry value to 0 by default (For HP) v1.3.2.4 -> v1.3.2.5 #. Bugfix channel scan cause some noise issue for barebond. #. Modified 34AVStrm.inf file "KS.Registration.NT to KS.Registration". (2005.05.19) #. Modified 34AVStrm.inf file to Disabling Preview Pin. (2005.05.19) #. Disable Preview Pin. (2005.05.19) #. Modified Input source seletion issue. for Europa2 Board , can support (Tuner, Composite1, S-Video1, composite2, S-Video2) video/audio input sources. for Other boards (Mercur, Tiger,...etc.), just support (Tuner, Composite1, S-Video1) video/audio input sources. #. Added MacroVision Function. #. Added Spride color-enhance Function. #. BugFix Europa2 board Secam-L video satanard bad video issue #. BugFix Europa2 resume delay time too long issue. #. BugFix FM Japan support frequency range ( 76MHz ~ 90MHz ) issue. #. Added Tiger board Input Connector selection function : #. Added Europa2 board composite/s-video ( Front_End/Rear_End ) input source switch function. #. Disabled TV7135 and Mercur board "713x BDA Digital Capture" filter issue. #. BugFix uropa2 Board MCE TV Channel Scan issue. #. BugFix Europa2 board DVB-T polarity issue. #. BugFix Europa2 board Demodulator and Tuner Enable_I2c_Connection True issueDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.