README.TXT file for FLASH 5.0 for Windows 3.1,Windows 95
---------------------------------------------------------------------------------------------------------------------------
System Requirement
---------------------------------------------------------------------------------------------------------------------------
Machine: 386 IBM Compatible or above
Operating System: Microsoft Windows 3.1 or Windows 95
Note: This program will also run on Microsoft Windows 95. However, it may not run
properly on Microsoft Memphis or NT.
----------------------------------------------------------------------------------------------------------------------------
Warning:When you use the flash loader,between flash erase & programming,don't pop
your modem card. Also,don't shutdown your machine.If you do this,your
modem card will be damaged,and it can't fix by any program itself.
----------------------------------------------------------------------------------------------------------------------------
Follow the steps below to upgrade your modem on Windows 31 or windows 95:
1.Make sure your PCMCIA socket drivers have been installed before upgrade this card.To verify,
choose" My computer",select a:\k56l\upgrade\windows\ double-click the Flash.exe.
2.Enter the name and path of the .HEX file you wish load,you could click the Browse icon to select
the .HEX file. EX. C:\P0910F4G.HEX
You can download the .HEX file on the web site http://www.Kingmax.com
3.Click the Perform Flash icon,Flash loader will check your modem type and sector size.
4.Finally,Flash loader will erase your modem flash and program the new code.
Notes for running from command line
----------------------------------------------------------------------------------------------------------------------------
This program will not run command line on Microsoft Windows 3.1.
However, command line works with Microsoft Windows 95.But we suggest don't use the command
line.Maybe you will make some errors.
If you will run the program with command line, follow the following syntax:
flash [COM#] [BAUDRATE] [PATH\MODEM.HEX] -option
For instance, if you have a modem connected to COM2 on your machine, you want
to set the baudrate at 19200, and your MODEM.HEX file is located in the path
as:
C:\WHATEVER\SOMETHING
then the command line string will look like this:
flash COM2 19200 C:\WHATEVER\SOMETHING\MODEM.HEX
For modem developers, this program offers an option for development -
/dev.
--------------------------------------------------------------------------------------------------------------------------
Notes for PCMCIA modem
--------------------------------------------------------------------------------------------------------------------------
Occasionally, during our test, we found that when we have finished full flash loading on
PCMCIA modem on 486 machine running Windows 3.1 for working group, the program dialog box
sometimes would not go away even though the <Close> button was clicked. If this happened to you,
just pop out the PCMCIA card fromloading slot, the click on <Close> button. The dialog box will
be closed immediately.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.