Driver installation Guide for NetWare 5.0 Server ====================================================== Introduction ============ This document describes the procedure to install Netware 5.0 server driver for AEF-360TX Family PCI Fast Ethernet Adapter. Location of Driver: \NETWARE\SRVRODI.500\RTSSRV.LAN Installation Procedure ====================== 1. In the system console, type the command "nwconfig". 2. Choice Driver options ->Configure network driver. Then "Addtional Driver Action" screen appear. 3. Choice "Select an addtional driver", then press "Ins" key to add an unlisted driver and press "F3" to specify driver path "A:\NETWARE\SRVRODI.500" 4. After copy files, Protocol seting screen will appear. Modify your driver's parameter and protocols Parameters ========== The following parameters belong on the server's command line, or in the load line inside the AUTOEXEC.NCF. The general way of using these parameters is: LOAD <driver name> <PARAMETER NAME>... <PARAMETER NAME[=VALUE]> Example: LOAD RTSSRV FRAME=Ethernet_802.2 Notes ===== 1. Installing Multiple LAN Adapters: The keyword "SLOT" is provided for multiple LAN adapters in a single server by the driver RTSSRV.LAN. So, add EtherID in LOAD commands. For example: LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1 BIND IPX TO LAN_A NET=11 LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_B SLOT=2 BIND IPX TO LAN_B NET=22 2. The keyword "MEDIUMTYPE" is provided for specifying adapter's speed (10M/100M) and duplex mode(half/full), add MEDIUMTYPE in LOAD commands. MEDIUMTYPE=AUTO : AUTO NEGOTIATION MEDIUMTYPE=10HALF : 10M SPPED AND HALFDUPLEX MODE MEDIUMTYPE=10FULL : 10M SPPED AND FULLDUPLEX MODE MEDIUMTYPE=100HALF : 100M SPPED AND HALFDUPLEX MODE MEDIUMTYPE=100FULL : 100M SPPED AND FULLDUPLEX MODE For example: LOAD RTSSRV FRAME=Ethernet_802.2 NAME=LAN_A SLOT=1 MEDIUMTYPE=100FULL BIND IPX TO LAN_A NET=11Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.