Install IBM IrDA driver 1.Power On to BIOS Setup set comport mode to RS232/IrDA or Disable/IrDA, IrDA mode set to IrDA1.1. 2.To DOS mode Remane file "msports.inf","infrared.inf" and "irdalan.inf" to "msports.bak","infrared.bak","irdalan.bak" in Windows\inf dir . 3.Delete *.bin file in Windows\inf directory. 4.Delete Micro*.inf in Windows\inf\other directory. 5.Boot to Windows 95. 6.To Start -> Settings -> Control Panel -> System -> Devicw Manager ->Ports[COM&LPT] Select COM2 after Remove it. 6.Restart Windows 95. 7.Insert IBM IrDA COM Driver to Floppy A. 8.Windows 95 can found "Unkown device" flowlly this Setp install IrDA COM Driver,the Driver source directory is A:\IrDA. 9.Into MS-DOS Prompt, Verfily system.ini to Add info below: [virphy] salc_base = 0x398 uart_base = 0x2f8 uart_int = 3 tx_dma = 3 rx_dma = 3 9.To Start ->Settings -> Control Panel -> Network -> Add -> Select "Adapter" -> Have Disk ,Please select Directory to A:\IrDA\NDIS to install Driver. 10 To Start -> Settings -> Control Panel -> Network -> Add -> into "Protocol" -> into Microsoft , Add NetBUEI Protocel. 11.Restart Windows 95Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.