1. Utility_3.zip Driver
2. IBM_COM.INF File Contents

IBM_COM.INF Driver File Contents (Utility_3.zip)

; INF File to load IR device as a com port
; Network must be run to add NDIS driver to system
[Version]
Signature  = $CHICAGO$
Class      = Ports
Provider   = %Mfg%
LayoutFile = IBM_COM.INF

[ClassInstall]
AddReg=ClassAddReg

;---------------------------------------
;  Destination Directories
;
[DestinationDirs]
DefaultDestDir    = 10
SYS_CopyFiles     = 11
INF_CopyFiles     = 17

;---------------------------------------
; Source Disks
;
[SourceDisksNames]
51="Windows 95 IBM IrDA Driver Disk",,1

[SourceDisksFiles]
virprot.386   = 51
virias.386    = 51
virphy.386    = 51
irda_dll.dll  = 51
ircomm.drv    = 51
ircomm.ini    = 51
ircon.exe     = 51
ircon.cnt     = 51
ircon.hlp     = 51
discover.wav  = 51
nodiscov.wav  = 51
irda32.dll    = 51
ir_msg.txt    = 51

;optional files for TranXit 16
;ibmir1.dll    = 51

;---------------------------------------
;manufactures

[Manufacturer]
%Mfg%=Mfg

;---------------------------------------
; Driver Sections
;
; the DEVICE ID must match the hardware for the INF file
; to be recognized by WIN 95 ver 4.00.1111 and above
[Mfg]
%IBM_COM.DeviceDesc% = IBM_COM, *PNP0510

;---------------------------------------
; Install Section
;
[IBM_COM]
AddReg     = IBM_COM_REG
CopyFiles  = IBM_COM_CopyFiles,SYS_CopyFiles,INF_CopyFiles
;UpdateInis = Common_UpdateInis

; This version of UpdateInis is used for legacy devices
UpdateInis = Common_UpdateInis,Legacy_UpdateInis

;---------------------------------------
; CopyFile Section
;
[IBM_COM_CopyFiles]
virprot.386,,,4
virias.386,,,4
virphy.386,,,4
irda_dll.dll,,,4
ircomm.ini,,,4
ircon.exe,,,4
ircon.cnt,,,4
ircon.hlp,,,4
discover.wav,,,4
nodiscov.wav,,,4
irda32.dll,,,4
ir_msg.txt,,,4

;optional file for TranXit 16
;ibmir1.dll,,,4

[SYS_CopyFiles]
ircomm.drv,,,4

[INF_CopyFiles]
ibm_com.inf,,,4

;---------------------------------------
; INI File update Section
;
[Common_UpdateInis]
%10%\system.ini,386Enh,,"device=virphy.386" ,0
%10%\system.ini,386Enh,,"device=virprot.386",0
%10%\system.ini,386Enh,,"device=virias.386" ,0

%10%\system.ini,boot,"comm.drv=comm.drv","comm.drv=ircomm.drv",0

;---------------------------------------
; INI File update Section for Legacy Device
; these entries are needed for older devices
; which are not true PnP and need the system.ini
; file for their configuration info as in WIN 3.x
;
[Legacy_UpdateInis]
%10%\system.ini,virphy,"uart_base ","uart_base = 0x02f8"
%10%\system.ini,virphy,"uart_irq  ","uart_irq  = 3 "
%10%\system.ini,virphy,"sdlc_base ","sdlc_base = 0x0398"
%10%\system.ini,virphy,"sdlc_irq  ","sdlc_irq  = 3"
%10%\system.ini,virphy,"tx_dma    ","tx_dma    = 3 "
%10%\system.ini,virphy,"rx_dma    ","rx_dma    = 3 "
%10%\system.ini,virphy,"setup_hw  ","setup_hw  = 1 "

;---------------------------------------
;
[IBM_COM_REG]
; the following line is needed for the static Vxd
; to locate the Device Node in the Registry
; the DEVICE ID will be modified to match the hardware
; this value is a place holder and will need to be changed
HKLM,"SOFTWARE\IR_DEVICE",,0,BIOS\*PNP0510\0F
HKR,,DeviceDriver,,VIRPHY.386

;---------------------------------------
; The Text Section

[Strings]
Provider = "IBM Microelectronics"
Mfg      = "IBM Microelectronics"
IBM_COM.DeviceDesc = "IBM IrDA COM DRIVER"