; ;----------------------------------- ;INTERMEC 2.4GHz RF ADAPTER ;----------------------------------- ; [JANUS] JG2010 (Intermec 4 Meg Hand Held) [POWER_MANAGEMENT] 5 [DELETE_DDRV] IRLDESK.EXE IRL001.DAT IRL.BAT RFPH.EXE DEBUG.EXE EDLIN.EXE UNDELETE.EXE SETVER.EXE FC.EXE LABEL.EXE SORT.EXE ATTRIB.EXE SUBST.EXE [DELETE_COND_DDRV] ANSI.SYS PHPCSTD.EXE PHIMEC.EXE INTERSVR.EXE CHKDSK.EXE FORMAT.COM MEM.EXE MORE.COM XCOPY.EXE DOSKEY.COM CHOICE.COM [DELETE_CDRV] COMMAND.COM INITENV.EXE JANUS.MRF CARDINFO.EXE [DELETE_COND_CDRV] MCFORMAT.EXE [ADD_DDRV_NET] A:\MINIPM.EXE A:\RL2OEM.COM A:\CHOICE.COM [ADD_DDRV_NET_E] A:\MINIPM.EXE A:\RL2UISA.COM A:\CHOICE.COM [ADD_DDRV_NET_AUTO] A:\MINIPM.EXE A:\RL2OEM.COM A:\RL2UISA.COM A:\CHOICE.COM [CONFIG_REM] [CONFIG_FIND_REPLACE] [CONFIG_APPEND] [AUTOEXEC_REM] RFPH 4 D:\KWC.COM [AUTOEXEC_FIND_REPLACE] [AUTOEXEC_APPEND] [LOGIN] @echo off H:\LOGIN [LOGOUT] @LOGOUT c: cd \ if exist unnet.bat call unnet.bat [NET_CFG] Link Support Buffers 8 1500 MemPool 4096 Max Stacks 8 Protocol TCPIP PATH LANG_CFG D:\NET\LANG PATH SCRIPT D:\NET\SCRIPT PATH PROFILE D:\NET\PROFILE PATH LWP_CFG D:\NET\HSTACC PATH TCP_CFG D:\NET\TCP ip_router ip_netmask ip_address Protocol IPXODI ; Time that SPX waits without receiving a packet before it requests ; the other side to send a packet to assure the connection is valid ; Count is in ticks. Default is 108 ticks (about 6 seconds). SPX Listen Timeout 5400 ;Wait time in tics before it requests a send ; Adjusts the frequency at which SPX sends a packet to the other side ; of the connection to indicate that it is still alive. ; Count is in ticks. Default is 54 ticks (about 3 seconds) SPX Verify Timeout 5400 ;Freq in ticks that SPX sends a packet NetWare DOS Requester FIRST NETWORK DRIVE = H NETWARE PROTOCOL = NDS BIND NAME CONTEXT = USE DEFAULTS = OFF VLM = CONN.VLM VLM = IPXNCP.VLM VLM = TRAN.VLM VLM = SECURITY.VLM VLM = NDS.VLM VLM = BIND.VLM VLM = NWP.VLM VLM = FIO.VLM VLM = GENERAL.VLM VLM = REDIR.VLM VLM = PRINT.VLM VLM = NETX.VLM Link Driver RL2OEM frame ETHERNET_802.2 frame ETHERNET_II int 7 port 270 sniff_time 0 ;Keep-alive packet disabled peer_to_peer N ;Bridging only radio_mode 0 ;800Kbs mode roam_config 0 ;Slow roaming /*Parameters Link Driver RL2UISA frame ETHERNET_802.2 frame ETHERNET_II int 7 port 270 sniff_time 0 ;Keep-alive packet disabled peer_to_peer N ;Bridging only radio_mode 0 ;800Kbs mode roam_config 0 ;Slow roaming /*Parameters [STARTUP NETWARE CLIENT] c: cd \ set nwlanguage=english d:\nwclient\lsl.com if not exist d:\nwclient\rl2oem.com goto TRY_ISA d:\nwclient\rl2oem.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2OEM.COM echo * pause :TRY_ISA if not exist d:\nwclient\rl2uisa.com goto CARD_OK d:\nwclient\rl2uisa.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2UISA.COM echo * pause :CARD_OK d:\nwclient\ipxodi.com d:\nwclient\vlm.exe /MX [STARTUP FTP] c: cd \ d:\net\drivers\lsl.com if not exist d:\net\drivers\rl2oem.com goto TRY_ISA d:\net\drivers\rl2oem.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2OEM.COM echo * pause :TRY_ISA if not exist d:\net\drivers\rl2uisa.com goto CARD_OK d:\net\drivers\rl2uisa.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2UISA.COM echo * pause :CARD_OK set PCTCP=C:\PCTCP.INI break on d:\net\bin\odipkt.com d:\net\bin\ethdrv.exe [STARTUP LAN WORKPLACE] c: cd \ d:\net\drivers\lsl.com if not exist d:\net\drivers\rl2oem.com goto TRY_ISA d:\net\drivers\rl2oem.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2OEM.COM echo * pause :TRY_ISA if not exist d:\net\drivers\rl2uisa.com goto CARD_OK d:\net\drivers\rl2uisa.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2UISA.COM echo * pause :CARD_OK set name= break on d:\net\drivers\tcpip.exe [JANUS] JG2020 (Intermec 4 Meg Hand Held) [POWER_MANAGEMENT] 5 [DELETE_DDRV] IRLDESK.EXE IRL001.DAT IRL.BAT RFPH.EXE DEBUG.EXE EDLIN.EXE UNDELETE.EXE SETVER.EXE FC.EXE LABEL.EXE SORT.EXE ATTRIB.EXE SUBST.EXE [DELETE_COND_DDRV] ANSI.SYS PHPCSTD.EXE PHIMEC.EXE INTERSVR.EXE CHKDSK.EXE FORMAT.COM MEM.EXE MORE.COM XCOPY.EXE DOSKEY.COM CHOICE.COM [DELETE_CDRV] COMMAND.COM INITENV.EXE JANUS.MRF CARDINFO.EXE [DELETE_COND_CDRV] MCFORMAT.EXE [ADD_DDRV_NET] A:\MINIPM.EXE A:\RL2OEM.COM A:\CHOICE.COM [ADD_DDRV_NET_E] A:\MINIPM.EXE A:\RL2UISA.COM A:\CHOICE.COM [ADD_DDRV_NET_AUTO] A:\MINIPM.EXE A:\RL2OEM.COM A:\RL2UISA.COM A:\CHOICE.COM [CONFIG_REM] [CONFIG_FIND_REPLACE] [CONFIG_APPEND] [AUTOEXEC_REM] RFPH 4 D:\KWC.COM [AUTOEXEC_FIND_REPLACE] [AUTOEXEC_APPEND] [LOGIN] @echo off H:\LOGIN [LOGOUT] @LOGOUT c: cd \ if exist unnet.bat call unnet.bat [NET_CFG] Link Support Buffers 8 1500 MemPool 4096 Max Stacks 8 Protocol TCPIP PATH LANG_CFG D:\NET\LANG PATH SCRIPT D:\NET\SCRIPT PATH PROFILE D:\NET\PROFILE PATH LWP_CFG D:\NET\HSTACC PATH TCP_CFG D:\NET\TCP ip_router ip_netmask ip_address Protocol IPXODI ; Time that SPX waits without receiving a packet before it requests ; the other side to send a packet to assure the connection is valid ; Count is in ticks. Default is 108 ticks (about 6 seconds). SPX Listen Timeout 5400 ;Wait time in tics before it requests a send ; Adjusts the frequency at which SPX sends a packet to the other side ; of the connection to indicate that it is still alive. ; Count is in ticks. Default is 54 ticks (about 3 seconds) SPX Verify Timeout 5400 ;Freq in ticks that SPX sends a packet NetWare DOS Requester FIRST NETWORK DRIVE = H NETWARE PROTOCOL = NDS BIND NAME CONTEXT = USE DEFAULTS = OFF VLM = CONN.VLM VLM = IPXNCP.VLM VLM = TRAN.VLM VLM = SECURITY.VLM VLM = NDS.VLM VLM = BIND.VLM VLM = NWP.VLM VLM = FIO.VLM VLM = GENERAL.VLM VLM = REDIR.VLM VLM = PRINT.VLM VLM = NETX.VLM Link Driver RL2OEM frame ETHERNET_802.2 frame ETHERNET_II int 7 port 270 sniff_time 0 ;Keep-alive packet disabled peer_to_peer N ;Bridging only radio_mode 0 ;800Kbs mode roam_config 0 ;Slow roaming /*Parameters Link Driver RL2UISA frame ETHERNET_802.2 frame ETHERNET_II int 7 port 270 sniff_time 0 ;Keep-alive packet disabled peer_to_peer N ;Bridging only radio_mode 0 ;800Kbs mode roam_config 0 ;Slow roaming /*Parameters [STARTUP NETWARE CLIENT] c: cd \ set nwlanguage=english d:\nwclient\lsl.com if not exist d:\nwclient\rl2oem.com goto TRY_ISA d:\nwclient\rl2oem.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2OEM.COM echo * pause :TRY_ISA if not exist d:\nwclient\rl2uisa.com goto CARD_OK d:\nwclient\rl2uisa.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2UISA.COM echo * pause :CARD_OK d:\nwclient\ipxodi.com d:\nwclient\vlm.exe /MX [STARTUP FTP] c: cd \ d:\net\drivers\lsl.com if not exist d:\net\drivers\rl2oem.com goto TRY_ISA d:\net\drivers\rl2oem.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2OEM.COM echo * pause :TRY_ISA if not exist d:\net\drivers\rl2uisa.com goto CARD_OK d:\net\drivers\rl2uisa.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2UISA.COM echo * pause :CARD_OK set PCTCP=C:\PCTCP.INI break on d:\net\bin\odipkt.com d:\net\bin\ethdrv.exe [STARTUP LAN WORKPLACE] c: cd \ d:\net\drivers\lsl.com if not exist d:\net\drivers\rl2oem.com goto TRY_ISA d:\net\drivers\rl2oem.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2OEM.COM echo * pause :TRY_ISA if not exist d:\net\drivers\rl2uisa.com goto CARD_OK d:\net\drivers\rl2uisa.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2UISA.COM echo * pause :CARD_OK set name= break on d:\net\drivers\tcpip.exe [JANUS] JG2050 (Intermec 4 Meg Vehicle Mount) [POWER_MANAGEMENT] 0 [DELETE_DDRV] IRLDESK.EXE IRL001.DAT IRL.BAT RFPH.EXE DEBUG.EXE EDLIN.EXE UNDELETE.EXE SETVER.EXE FC.EXE LABEL.EXE SORT.EXE ATTRIB.EXE SUBST.EXE [DELETE_COND_DDRV] ANSI.SYS PHPCSTD.EXE PHIMEC.EXE INTERSVR.EXE CHKDSK.EXE FORMAT.COM MEM.EXE MORE.COM XCOPY.EXE DOSKEY.COM CHOICE.COM [DELETE_CDRV] COMMAND.COM INITENV.EXE JANUS.MRF CARDINFO.EXE [DELETE_COND_CDRV] MCFORMAT.EXE [ADD_DDRV_NET] A:\MINIPM.EXE A:\RL2OEM.COM A:\CHOICE.COM [ADD_DDRV_NET_E] A:\MINIPM.EXE A:\RL2UISA.COM A:\CHOICE.COM [ADD_DDRV_NET_AUTO] A:\MINIPM.EXE A:\RL2OEM.COM A:\RL2UISA.COM A:\CHOICE.COM [CONFIG_REM] [CONFIG_FIND_REPLACE] [CONFIG_APPEND] [AUTOEXEC_REM] RFPH 4 D:\KWC.COM [AUTOEXEC_FIND_REPLACE] [AUTOEXEC_APPEND] [LOGIN] @echo off H:\LOGIN [LOGOUT] @LOGOUT c: cd \ if exist unnet.bat call unnet.bat [NET_CFG] Link Support Buffers 8 1500 MemPool 4096 Max Stacks 8 Protocol TCPIP PATH LANG_CFG D:\NET\LANG PATH SCRIPT D:\NET\SCRIPT PATH PROFILE D:\NET\PROFILE PATH LWP_CFG D:\NET\HSTACC PATH TCP_CFG D:\NET\TCP ip_router ip_netmask ip_address Protocol IPXODI ; Time that SPX waits without receiving a packet before it requests ; the other side to send a packet to assure the connection is valid ; Count is in ticks. Default is 108 ticks (about 6 seconds). SPX Listen Timeout 5400 ;Wait time in tics before it requests a send ; Adjusts the frequency at which SPX sends a packet to the other side ; of the connection to indicate that it is still alive. ; Count is in ticks. Default is 54 ticks (about 3 seconds) SPX Verify Timeout 5400 ;Freq in ticks that SPX sends a packet NetWare DOS Requester FIRST NETWORK DRIVE = H NETWARE PROTOCOL = NDS BIND NAME CONTEXT = USE DEFAULTS = OFF VLM = CONN.VLM VLM = IPXNCP.VLM VLM = TRAN.VLM VLM = SECURITY.VLM VLM = NDS.VLM VLM = BIND.VLM VLM = NWP.VLM VLM = FIO.VLM VLM = GENERAL.VLM VLM = REDIR.VLM VLM = PRINT.VLM VLM = NETX.VLM Link Driver RL2OEM frame ETHERNET_802.2 frame ETHERNET_II int 7 port 270 sniff_time 0 ;Keep-alive packet disabled peer_to_peer N ;Bridging only radio_mode 0 ;800Kbs mode roam_config 0 ;Slow roaming /*Parameters Link Driver RL2UISA frame ETHERNET_802.2 frame ETHERNET_II int 7 port 270 sniff_time 0 ;Keep-alive packet disabled peer_to_peer N ;Bridging only radio_mode 0 ;800Kbs mode roam_config 0 ;Slow roaming /*Parameters [STARTUP NETWARE CLIENT] c: cd \ set nwlanguage=english d:\nwclient\lsl.com if not exist d:\nwclient\rl2oem.com goto TRY_ISA d:\nwclient\rl2oem.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2OEM.COM echo * pause :TRY_ISA if not exist d:\nwclient\rl2uisa.com goto CARD_OK d:\nwclient\rl2uisa.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2UISA.COM echo * pause :CARD_OK d:\nwclient\ipxodi.com d:\nwclient\vlm.exe /MX [STARTUP FTP] c: cd \ d:\net\drivers\lsl.com if not exist d:\net\drivers\rl2oem.com goto TRY_ISA d:\net\drivers\rl2oem.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2OEM.COM echo * pause :TRY_ISA if not exist d:\net\drivers\rl2uisa.com goto CARD_OK d:\net\drivers\rl2uisa.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2UISA.COM echo * pause :CARD_OK set PCTCP=C:\PCTCP.INI break on d:\net\bin\odipkt.com d:\net\bin\ethdrv.exe [STARTUP LAN WORKPLACE] c: cd \ d:\net\drivers\lsl.com if not exist d:\net\drivers\rl2oem.com goto TRY_ISA d:\net\drivers\rl2oem.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2OEM.COM echo * pause :TRY_ISA if not exist d:\net\drivers\rl2uisa.com goto CARD_OK d:\net\drivers\rl2uisa.com if not errorlevel 1 goto CARD_OK echo * echo * Error Loading Radio Driver echo * RL2UISA.COM echo * pause :CARD_OK set name= break on d:\net\drivers\tcpip.exe ;**************************************************************************** [END_OF_INI_FILE] ;****************************************************************************Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.