[Identification]
OptionType = VIDEO
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ServicesEntry]
CurrentEntry = "" ? $(!LIBHANDLE) GetDevicemapValue Video \Device\Video0
[SystemVariables]
STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir
STF_WINDOWSPATH = "" ? $(!LIBHANDLE) GetWindowsNtDir
[MiniportDrivers]
neomagic = neomagic , !SERVICE_KERNEL_DRIVER, Video, !SERVICE_ERROR_NORMAL, {neo20xx3, framebuf} , 0, "%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\neo20xx.sys", 7, 1, {}, noconfig
[OpenGLDrivers]
[ExternalInstallOption]
Set !G:DebugOutputControl = 0
set Exit_Code = $(!SETUP_ERROR_GENERAL)
install LoadSetupLibrary
ifstr(i) $(STF_LANGUAGE) == ""
goto end
else-ifstr(i) $(OPTION) == ""
goto end
else-ifstr(i) $(INITSRC) == ""
goto end
else-ifstr(i) $(ADDCOPY) == ""
goto end
else-ifstr(i) $(DOCOPY) == ""
goto end
else-ifstr(i) $(DOCONFIG) == ""
goto end
else-ifstr(i) $(DOINSTALL) == ""
goto end
else-ifstr(i) $(INFFILE) == ""
goto end
endif
LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE
set STF_CONTROLSET = CurrentControlSet
read-syms SystemVariables
detect SystemVariables
shell $(INFFILE) InstallOption $(STF_LANGUAGE) $(OPTION) $(INITSRC) $(ADDCOPY) $(DOCOPY) $(DOCONFIG) $(DOINSTALL)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Execing Configuring hardware failed"
goto end
endif
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set Exit_Code = $(!SETUP_ERROR_SUCCESS)
else-ifstr(i) $($R0) == STATUS_USERCANCEL
set Exit_Code = $(!SETUP_ERROR_USERCANCEL)
endif
end =+
install FreeSetupLibrary
FreeLibrary $(!LIBHANDLE)
exit
[InstallOption]
set Status = STATUS_FAILED
set DrivesToFree = {}
set !Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set DoInstall = $($6)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_InstallOption
endif
read-syms Strings$($0)
ifstr(i) $(!Option) != "DETECT"
set OptionList = ^(Options, 0)
ifcontains $(!Option) in $(OptionList)
else
goto finish_InstallOption
endif
set OptionList = ""
set DriverEntry = #(Options, $(!Option), 1)
set MiniportDriver = #(MiniportDrivers, $(DriverEntry), 1)
set InstalledDisplays = #(MiniportDrivers, $(DriverEntry), 5)
set OtherFiles = #(MiniportDrivers, $(DriverEntry), 10)
endif
read-syms ServicesEntry
detect ServicesEntry
set DriversList = ^(MiniportDrivers, 0)
set MiniportDriverList = ^(Files-DisplayMiniportDrivers, 0)
set DisplayDriverList = ^(Files-DisplayDLLs, 0)
set OpenGLDriverList = ^(OpenGLDrivers, 0)
installtheoption = +
ifstr(i) $(AddCopy) == "YES"
ifstr(i) $(!Option) == "DETECT"
set DoActualCopy = YES
else
set DoActualCopy = NO
set FileToCheck = #(Files-DisplayMiniportDrivers, $(MiniportDriver), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
goto addfiles
endif
ForListDo $(OtherFiles)
ifcontains $($) in $(MiniportDriverList)
set FileToCheck = #(Files-DisplayMiniportDrivers, $($), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
goto addfiles
endif
endif
EndForListDo
ForListDo $(InstalledDisplays)
ifcontains $($) in $(DisplayDriverList)
set FileToCheck = #(Files-DisplayDLLs, $($), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
goto addfiles
endif
ifcontains $($) in $(OpenGLDriverList)
set FileToCheck = #(Files-DisplayOpenGLDrivers, #(OpenGLDrivers, $($), 1), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
goto addfiles
endif
endif
endif
EndForListDo
endif
addfiles = +
ifstr(i) $(DoActualCopy) == NO
shell "subroutn.inf" DriversExist $($0) $(String1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "VIDEO.INF: shelling DriversExist failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_CURRENT
else-ifstr(i) $($R0) == STATUS_NEW
set DoActualCopy = YES
else-ifstr(i) $($R0) == STATUS_USERCANCEL
Debug-Output "VIDEO.INF: User cancelled video installation"
goto finish_InstallOption
else
Debug-Output "VIDEO.INF: Error reported in DriversExist routine in SUBROUTN.INF"
goto finish_InstallOption
endif
endif
ifstr(i) $(DoActualCopy) == YES
; This gets the path from which NT was installed. We want to
; stick with A:\ or whatever.
; shell "registry.inf" GetNTSource
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; else-ifstr(i) $($R0) != STATUS_SUCCESSFUL
; else
; set SrcDir = $($R1)
; endif
shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "VIDEO.INF: shelling DoAskSourceEx failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set SrcDir = $($R1)
ifstr(i) $($R2) != ""
set DrivesToFree = >($(DrivesToFree), $($R2))
endif
else
Debug-Output "VIDEO.INF: User cancelled asking source."
goto finish_InstallOption
endif
ifstr(i) $(!Option) != "DETECT"
install Install-AddCopyOption
else
install Install-AddAllCopy
endif
ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
Debug-Output "VIDEO.INF: Adding video files to copy list failed"
goto finish_InstallOption
endif
else
set DoCopy = NO
endif
endif
ifstr(i) $(DoCopy) == "YES"
read-syms ProgressCopy$($0)
install Install-DoCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
Debug-Output "Copying files failed"
goto finish_InstallOption
else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
set Status = STATUS_USERCANCEL
goto finish_InstallOption
endif
endif
ifstr(i) $(DoConfig) == "YES"
shell "registry.inf" CheckSetupModify
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto finish_InstallOption
endif
ForListDo $(DriversList)
ifstr(i) $(!Option) == "DETECT"
set DriverEntry = $($)
set DeviceDescription = ""
set ErrorControl = $(!SERVICE_ERROR_IGNORE)
ifcontains #(MiniportDrivers, $(DriverEntry), 1) in $(MiniportDriverList)
ifint #(MiniportDrivers, $(DriverEntry), 9) == 1
set configDriver = YES
else
set configDriver = NO
endif
else
set configDriver = NO
endif
else
set DeviceDescription = $(!Option)
set ErrorControl = $(#(MiniportDrivers, $(DriverEntry), 4))
ifstr(i) $(DriverEntry) == $($)
set configDriver = YES
else
set configDriver = NO
endif
endif
ifstr(i) $(configDriver) == YES
Debug-Output "configuring the miniport driver"
set MiniportDriver = #(MiniportDrivers, $(DriverEntry), 1)
set Type = $(#(MiniportDrivers, $(DriverEntry), 2))
set Group = #(MiniportDrivers, $(DriverEntry), 3)
set InstalledDisplays = #(MiniportDrivers, $(DriverEntry), 5)
set VgaCompatible = #(MiniportDrivers, $(DriverEntry), 6)
set EventMessageFile = #(MiniportDrivers, $(DriverEntry), 7)
set TypesSupported = #(MiniportDrivers, $(DriverEntry), 8)
set ServiceNode = $(DriverEntry)
set ServiceBinary = %SystemRoot%\System32\drivers\#(Files-DisplayMiniportDrivers, $(MiniportDriver), 2)
set ServicesValues = { +
{Type, 0, $(!REG_VT_DWORD), $(Type) }, +
{Group, 0, $(!REG_VT_SZ), $(Group) }, +
{ErrorControl, 0, $(!REG_VT_DWORD), $(ErrorControl) }, +
{BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary) } +
}
ifstr(i) $(DoInstall) == "YES"
set ServicesValues = >($(ServicesValues), +
{Start, 0, $(!REG_VT_DWORD), $(!SERVICE_SYSTEM_START) })
else
set ServicesValues = >($(ServicesValues), +
{Start, 0, $(!REG_VT_DWORD), $(!SERVICE_DISABLED) })
endif
set !ParametersValues = { +
{"Device Description", 0, $(!REG_VT_SZ), $(DeviceDescription) }, +
{InstalledDisplayDrivers, 0, $(!REG_VT_MULTI_SZ), $(InstalledDisplays) }, +
{VgaCompatible, 0, $(!REG_VT_DWORD), $(VgaCompatible) }, +
{DefaultSettings.BitsPerPel, 0, $(!REG_VT_DWORD), 0 }, +
{DefaultSettings.VRefresh, 0, $(!REG_VT_DWORD), 0 }, +
{DefaultSettings.Interlaced, 0, $(!REG_VT_DWORD), 0 }, +
{DefaultSettings.XResolution, 0, $(!REG_VT_DWORD), 0 }, +
{DefaultSettings.YResolution, 0, $(!REG_VT_DWORD), 0 } +
}
ifstr(i) $(!Option) != "DETECT"
shell "" #(MiniportDrivers, $(DriverEntry), 11)
endif
set DeviceValues = {}
set EventLogValues = { +
{EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
{TypesSupported, 0, $(!REG_VT_DWORD), $(TypesSupported) } +
}
shell "registry.inf" MakeServicesEntry $(ServiceNode) +
$(ServicesValues) +
$(!ParametersValues) +
$(DeviceValues) +
$(EventLogValues) +
Device0
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "MakeServicesEntry failed for video"
goto finish_InstallOption
endif
ForListDo $(InstalledDisplays)
ifcontains $($) in $(OpenGLDriverList)
set KeyPath = { +
{SOFTWARE, 0, $(MaskAllAccess)}, +
{Microsoft, 0, $(MaskAllAccess)}, +
{"Windows NT", 0, $(MaskAllAccess)}, +
{CurrentVersion, 0, $(MaskAllAccess)}, +
{OpenGLDrivers, 0, $(MaskAllAccess)} +
}
set KeyValue = { +
{$($), 0, $(!REG_VT_SZ), #(OpenGLDrivers, $($), 1) } +
}
shell "registry.inf" CreateKey $(!REG_H_LOCAL) $(KeyPath) $(KeyValue)
Debug-Output "just did an OGL section"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Couldn't execute CreateKey in registry.inf"
goto endInstallOpenGLDriver
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "CreateKey failed for OGLDrivers"
goto endInstallOpenGLDriver
endif
Debug-Output "VIDEO.INF: success installing an ogl entry"
endif
EndForListDo
endif
EndForListDo
endif
set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
ForListDo $(DrivesToFree)
LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
EndForListDo
Return $(Status)
[Install-AddCopyOption]
Debug-Output "adding to copy list"
set STF_VITAL = ""
AddSectionKeyFileToCopyList Files-DisplayMiniportDrivers +
$(MiniportDriver) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)\drivers
ForListDo $(OtherFiles)
ifcontains $($) in $(MiniportDriverList)
Debug-Output "adding other files to copy list"
AddSectionKeyFileToCopyList Files-DisplayMiniportDrivers +
$($) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)\drivers
endif
EndForListDo
ForListDo $(InstalledDisplays)
ifcontains $($) in $(DisplayDriverList)
Debug-Output "adding display driver to copy list"
AddSectionKeyFileToCopyList Files-DisplayDLLs +
$($) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)
ifcontains $($) in $(OpenGLDriverList)
Debug-Output "adding opengl driver to copy list"
AddSectionKeyFileToCopyList Files-DisplayOpenGLDrivers +
#(OpenGLDrivers, $($), 1) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)
endif
endif
EndForListDo
exit
[Install-AddAllCopy]
Debug-Output "adding all drivers to copy list"
set STF_VITAL = ""
AddSectionFilesToCopyList Files-DisplayMiniportDrivers +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-DisplayDLLs +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)
exit
[Install-DoCopyOption]
CopyFilesInCopyList
exit
[noconfig]
return
[Source Media Descriptions]
1 = "NeoMagic MagicGraph 128/V/ZV/XD Installation DISK (VIDEO)" , TAGFILE = neomagic.351
[Files-DisplayDLLs]
neo20xx3 = 1,neo20xx3.dll, SIZE=999
framebuf = 1,framebuf.dll, SIZE=999
[Files-DisplayMiniportDrivers]
neomagic = 1,neo20xx.sys , SIZE=999
[LanguagesSupported]
ENG
[Options]
"NeoMagic MagicGraph128/V/ZV/XD" = neomagic
[OptionsTextENG]
"NeoMagic MagicGraph128/V/ZV/XD" = "NeoMagic MagicGraph128/V/ZV/XD"
[ProgressCopyENG]
ProCaption = "NeoMagic MagicGraph128/V/ZV/XD Install"
ProCancel = "Cancel"
ProCancelMsg = "The NeoMagic MagicGraph128/V/ZV/XD display driver is not "+
"completely installed. Are you sure you want "+
"to cancel copying files?"
ProCancelCap = "Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[StringsENG]
String1 = "Display"
String2 = "Please enter the full path to the NeoMagic MagicGraph128/V/ZV/XD "+
"display driver files. Then choose Continue."
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.