PACKAGE VERSION: 58 Please address questions on release notes to: Catherine Stevens 781-461-3896 catherine.stevens@analog.com DATE PREPARED: 8/2/99 FIELD APPLICATIONS ENGINEER OR EQUIVALENT: WDM driver contact: Jeremy Freeman 781-461-3675 jeremy.freeman@analog.com Installer contact: Larry Beach 781-461-3026 larry.beach@analog.com HARDWARE ENGINEER: Fred Loeb 781-461-3773 fred.loeb@analog.com PURPOSE OF RELEASE: This build is a Release Candidate of the WDM driver for Intel 82801AA/AB chipset. COMPONENT/VERSION: SoundMAX WDM Driver Version: 5.00.2229 Installer Version: 1.00.006 COMPONENT QUALIFICATION AND LANGUAGE: ; ; AL=Alpha ; BT=Beta ; RC=Release Candidate ; GM=Golden Master US (RC).. US (English) GB (RC).. United Kingdom (English) AP ( ).. APD (English) AR (RC).. Middle East Region (Arabic OS/ English SW) AU ( ).. Australia (English) NZ ( ).. New Zealand (English) ED ( ).. US Educational (English) FC ( ).. Canada (French) BR (RC).. Brazil (Brazilian Portuguese) LA ( ).. Latin America (LA Spanish) LX ( ).. Luxemboug ME ( ).. Malaysia (English) TW (RC).. Taiwan (Traditional Chinese) CH (RC).. PRC (Simplified Chinese) DK (RC).. Denmark (Danish) NL (RC).. Netherlands (Dutch) FI (RC).. Finland (Finnish) FR (RC).. France (French) GR (RC).. Germany (German) KR (RC).. Korea (Korean [Hangeul]) NO (RC).. Norway (Norwegian) PT (RC).. Portugal (Brazilian Portuguese) SP (RC).. Spain (LA Spanish) SE (RC).. Sweden (Swedish) JP (RC).. Japan (Japanese) SG ( ).. Switzerland (German) SF ( ).. Switzerland (French) IT (RC).. Italy (Italian) TH (RC).. Thailand (Thai) BN ( ).. Belgium (Dutch) BF ( ).. Belgium (French) AS ( ).. Austria (German) PH ( ).. Philippines (PTT) SI ( ).. Singapore (English) CE ( ).. Canada (English) EE ( ).. Europe (English) IN ( ).. India HK ( ).. Hong Kong (English) RU (RC).. Russia (Russian) CANDIDATE NOTES/KNOWN ISSUES/LANGUAGES SUPPORTED: Localization is supported in this release. The internationalized version of Install Shield does not support Arabic, however, the driver does. INSTALL AND REMOVE INSTRUCTIONS: This software is installed automatically by the Microsoft Windows Hardware Installation Wizard. When the hardware is detected, the Wizard will prompt for the disk containing the device information file. Cancel out of the Hardware Install Wizard, and run the Setup program once the computer finishes booting. Factory Install/ Driver Install To run the utility before login for installation along with the OS, use the RunServicesOnce key under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ Windows\CurrentVersion. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ RunServiceOnce needs to have a value, ADI_Install, whose data is <Path to Setup files>\Setup.exe -s entered in the registry. This entry can be made using the MSBATCH.INF file during installation of the OS. The Setup.exe program is copying the files needed by the Hardware Setup Wizard to automatically load the driver. Because the RunServicesOnce key launches programs asynchronously, the developer writing the install script must make sure this setup has completed before the Hardware Wizard starts. The amount of time required for the setup application to finish will depend on where the setup application is running from. For example, it takes approximately 15 seconds to run from a hard drive. To run the utility after login for installation along with the OS, use the RunOnce key under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\ CurrentVersion. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce needs to have a value, ADI_Install, whose data is <Path to Setup files> \Setup.exe -s entered in the registry. This entry can be made using the MSBATCH.INF file during installation of the OS. The developer writing the install script will need to cancel out of the Hardware Wizard when it detects a board and is requesting the drivers. The RunOnce key will then execute the setup just after windows finishes booting. The system will need to be rebooted to finish the install using this registry key. Install and Update 1. Run Setup.exe. 2. Choose to reboot at the end of the install program. The system will reload the drivers and make any adjustments in the INF file if so required. Uninstall 1. Go to Start\Settings\Control Panel. 2. Go to the Add/Remove programs icon and double-click on the SoundMAX uninstall. This procedure will remove all files loaded at install, and the installer will need to be run again before the sound system will work. CERTIFICATION VERIFICATION: Is the deliverable PC98 Compliant? - (Yes), Necessary? - (YES) Is the deliverable PC99 Compliant? - (Yes), Necessary? - (Yes) Is Windows Hardware Quality Labs submission necessary? - (YES) Does the component contain "Bit Flipped" .vxd files? - (NO) Identify the file(s) by name: () Presence of CAT? Populated - (NO) Placeholder - (YES) Necessary? - (?) Is the component Direct X Certified? DX6.x - (NO) or DX7 - (NO) Submission ID: () Master ID: () HARDWARE AND SOFTWARE DEPENDENCIES: This driver has been designed for and tested with Windows 98SE only. There are issues with Windows 98 Gold that will cause problems in Direct Sound. This driver is intended to be used with Windows 98 SE. This driver will run under Windows2000,but has not gone through the full test process. This driver was loaded on a system running Windows 2000 (build 2031). It would not load with Windows 2000 (build 2020). The Microsoft audio driver also did not load with this build. This has been reported to Microsoft. 1. The system must contain one of the following Intel processor and chipset configurations: Chip set: Intel(r) 810 Chipset Intel(r) 820 Chipset Processor: Intel(r) Pentium(r) II processor Intel(r) Pentium(r) II Xeon(tm) processor Intel(r) Celeron(tm) processor 2. Ensure that a mouse is connected to the system. 3. One of the following operating systems must be installed on the system: Windows 98 SE 4.10.2222 Windows 2000 Professional (build 2031) This driver is built for the Microsoft(R) Windows(R) Operating Systems that support the WDM driver model, currently Windows 98 and Windows 2000. SOFTWARE SUPERSEDED: 4.10.2228 BIOS DEPENDENCIES: [Enter any BIOS dependencies associated with this deliverable.] PRODUCT ENHANCEMENTS/FIXED DEFECTS: [Identify all fixed defects and product enhancements to the component in this section] * Fixed BSOD while running Driver Disabler test when Driver Verifier enabled. * Same CD Player Volume control used for Analog or Digital CD playback. * Fixed power management for Win2000. PRODUCT ENHANCEMENTS/DEFECTS NOT COMPLETED IN THIS RELEASE: [Identify all defects and product enhancements scheduled but not completed in this section] KNOWN ISSUES & BUGS: [Identify all known issues or defects that are not fixable or scheduled to be released. Include relevant component interaction issues that will impact the deliverables behavior.] Track # 71 DESCRIPTION: Problem occurs while loading the 1881 driver, Version 4.10.2111. The subsystem ID returned by the bios is incorrect. Reported in driver version: 4.10.2111 Comments: For windows 98, the subsystem is used to aid in identifying and matching the inf file to the hardware. If the bios returns an unexpected subsystem number that is not in the inf file then the drivers will not load correctly. A temporary work around for this problem is to include the subsystem ID returned by the bios until the bios is corrected. Track # 76 DESCRIPTION: If MIDI, AVI, and wave files are played and then the wave file is muted, the MIDI is also muted. Only a snippet of MIDI is heard every few seconds. Reported in driver version: 4.10.2111 Comments: This is an issue relating to KMIXER. It is responsible for the mixing, attenuation, and muting of the "soft" audio streams. Track # 77 DESCRIPTION: All full-duplex testing in ACT fails. There are more problems on Whitney platform than on Camino platform. Reported in driver version: 4.10.2111 Track # 83 DESCRIPTION: A pop occurs on start and exit of Windows. Comments: This is not a driver issue. This is a hardware issue. Track # 85 DESCRIPTION: There is additional static on MIDI when heavy I/O and DMA are off. Comments: This is not a driver issue. This problem is specific to planar design. SYSTEM FILE/REGISTRY CHANGES: Not available for this release. DELIVERABLE CONTENTS ADIOUT BAT 71 07-14-99 2:46p Adiout.bat ADI_RMV EXE 23,888 03-29-99 12:22p Adi_Rmv.exe DATA TAG 142 08-02-99 3:26p DATA.TAG DATA1 CAB 469 08-02-99 3:27p data1.cab DATA1 HDR 4,301 08-02-99 3:27p data1.hdr LANG DAT 4,679 09-18-98 3:12p lang.dat LAYOUT BIN 1,172 08-02-99 3:27p layout.bin OS DAT 450 07-27-98 6:41p os.dat SETUP EXE 60,928 10-02-98 6:04p Setup.exe SETUP INI 105 08-02-99 3:26p SETUP.INI SETUP INS 14,893 07-30-99 4:01p setup.ins SETUP ISS 324 02-02-99 10:18a setup.iss SETUP LID 233 08-02-99 3:26p setup.lid SETUPDIR <DIR> 08-02-99 6:26p setupdir SMWDM INF 18,083 08-02-99 9:27a Smwdm.inf SMWDM SYS 54,144 07-30-99 3:59p Smwdm.sys WIN256_3 BMP 303,684 01-26-99 12:07p win256_3.bmp _INST32I EX_ 297,989 10-02-98 7:15p _INST32I.EX_ _ISDEL EXE 8,704 10-27-98 1:08p _ISDel.exe _SYS1 CAB 2,673,325 08-02-99 3:26p _sys1.cab _SYS1 HDR 14,667 08-02-99 3:26p _sys1.hdr _USER1 CAB 5,466 08-02-99 3:26p _user1.cab _USER1 HDR 18,156 08-02-99 3:26p _user1.hdrDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.