README.TXT Driver File Contents (

                             Asound 10/100M Based Fast Ethernet Card

				Packet Driver for DOS


  This document describes the procedure to setup the Packet driver for
  ASOUND 10/100M Based PCI Ethernet Adapter.

  Location of Driver:     \PKTDRV\MTDPKT.COM


  Load the packet driver using the software interrupt and any
  optional switches if required.

  Usage: 10/100M [-u] <software_int_no> [media]

  Example: 10/100M 0x60

  The only required parameter is the software interrupt.  A packet
  driver needs to have a software interrupt assigned to it for other
  programs to access it.
  If you need any of the options listed below, place them before the
  software interrupt on the command line.

    -u           : to unload this driver",CR,LF
    packet_int_no: to set software interrupt for this driver
                   the reasonable value is from 0x60 to 0x80
    media        : to set the line speed and fullduplex function
                   the reasonable value is auto/10half/10full/100half/100full
                   auto    = enable autonegotiation
                   10half  = force to 10M, half duplex
                   10full  = force to 10M, full duplex
                   100half = force to 100M, half duplex
                   100full = force to 100M, full duplex

Histories of Release:

  ***) 1.00,  08-09-1999
         First release.

  ***) 1.10,  04-24-2000
         For the PHY issue.
         Change driver name to MTDPKT.COM.

  ***) 2.00,  06-27-2000
         For MTD800, MTD803 and MTD891.

  ***) 2.10,  07-05-2000
         For RSAN issue.

  ***) 2.20,  07-10-2000
         For medium changes issue.

  ***) 2.30,  07-25-2000
         Verify the driver for MTD800+MTD981 demo board.

  ***) 2.40,  07-25-2000
         Verify the driver for plug/play problem at runtime.

  ***) 2.60,  09-01-2000
         Verify the driver for OEM issue.
         Delete polling link status action.

  ***) 2.70,  10-04-2000
         Add to handle the length of type is zero case.

  ***) 2.90,  01-18-2001
         Modify for fatal bus error issue.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.68