README.TXT Driver File Contents (asound100nic.zip)

                           ASOUND .O for Linux

                          Asound  Technology Inc.



Installation:

  1. copy the source code mtd80x.c to Linux,

  2. compile the source code, the instruction for compiling the driver is
     as follows:

        #gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall
             -Wstrict-prototypes -O6 -c mtd80x.c

  3. insert the driver as module,

        #insmod mtd80x.o

  4. bind your card to an IP address

        #ifconfig eth0 ${IPADDR} broadcast ${BROADCAST} netmask ${NETMASK}

  5. add your card to IP routing table,

        #route add -net ${NETWORK} netmask ${NETMADK} eth0

  6. now, you should be able to ping local network.


Histories of Release:

  ***) 1.00,  12-17-1999
         First release.

  ***) 2.00,  06-13-2000
         For MTD800, MTD803 and MTD891.

  ***) 2.10,  07-26-2000
         Verify this driver by MTD800+MTD981.

  ***) 2.20,  09-01-2000
         Modify the default value of burst length.

  ***) 2.30,  12-08-2000
         Modify display messages.

  ***) 2.50,  01-17-2001
         Modify for fatal bus error issue.
   

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.33