readme_DK3200_3.txt DK3200 software, released 20 November 02 This archive consists of one ZIP file, DK3200_dsn_3.ZIP, containing all the project files needed to recreate this demonstration design using uVision 8051 IDE (Full PK51 version 7.00 or later) from Keil Software Inc. and PSDsoft Express (Ver 7.60 or later). This example uses a Real Time Clock to demonstrates the uPSD's I2C IP functionality. the ZIP file that contain the source code and binary copies of the demo code. The demo code shows how to make use of the I2C device drivers provided to perform standard I2C device enumeration and how to transfer and receive data over the I2C bus. This demo application runs on a DK3200 board. The folder DK3200_I2C_Demo contains two folders in itself called DK3200_3_c and DK3200_3_p. DK3200_3_c contains all the 8032 project and source files for use with the Keil Compiler/Linker/Debugger. Copy this folder and its contents anywhere on your disk, then open the project DK3200_3.uv2 using Keil uVision 2 (PK51 version 7.00 or later). This folder contains the .hex that is already built and ready to flash into the uPSD. The folder DK3200_3_p contains all the PSDsoft Express project files needed to build the design. Just copy the contents of this folder into your working folder, \\PSDexpress\my_project, and then open the project DK3200_3.ini using PSDsoft Express. This folder contains the .obj file and other supporting files ready to load into the uPSD using the PSDsoft and FlashLink. The example demo code is provided as is and has no warranty, implied or otherwise. You are free to use/modify any of the provided code at your own risk in your applications with the expressed limitation of liability (see below) so long as your product using the code contains at least one uPSD products (device). LIMITATION OF LIABILITY: NEITHER STMicroelectronics NOR ITS VENDORS OR AGENTS SHALL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.