readme_DK3200_1.txt DK3200 software, released 20 November 02 This archive consists of one ZIP file, DK3200_dsn_1.ZIP, containing all the project files needed to recreate this demonstration design using uVision 8051 IDE (Demo Version or PK51 version 7.00 or later) from Keil Software Inc and PSDsoft Express (Ver 7.60 or later). This simple program sends a varying pulse train out on PWM channel PWM0, the DK3200 board integrates the pulse train through an RC network, and the resulting slow-sweeping DC voltage is measured with ADC input channel ADC0. Then the HEX ADC conversion value is displayed on LCD. This project also illustrates the use of the uPSD PLD. A 4-bit auto-reloading down-counter is implmented and the 8032 writes to microcells directly to load the inital count. See App Note AN1560 for details. You can use these files to build and run a project on the DK3000 kit, or browse them for ideas on your own circuit board. The file DK3200_dsn_1.ZIP contains two folders. The folder DK3200_1_c contains all the 8032 project and source files for use with the Keil Compiler/Linker/Debugger. Copy this folder and its contents anywhere on your disk, then open the project DK3200_1.uv2 using Keil uVision 2 (PK51 version 7.00 or later). The folder DK3200_1_p contains all the PSDsoft Express project files needed to build the design. Just copy the contents of this folder into your working folder, \\PSDexpress\my_project, and then open the project DK3200_1.ini using PSDsoft Express. The example demo code is provided as is and has no warranty, implied or otherwise. You are free to use/modify any of the provided code at your own risk in your applications with the expressed limitation of liability (see below) so long as your product using the code contains at least one uPSD products (device). LIMITATION OF LIABILITY: NEITHER STMicroelectronics NOR ITS VENDORS OR AGENTS SHALL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.