; This is a sample protocol.ini for the NETBEUI protocol ; that you can use in the Banyan Environment [PROTOCOL MANAGER] DriverName = PROTMAN$ [NETBEUI_XIF] DriverName = netbeui$ BINDINGS = SMCPWR_NIF [SMCPWR_NIF] DriverName = SMCPWR$ Data_Rate = MB10 ; Sia_Mode = AUTODETECT ; slot = 16 ; to support two adapters, uncomment the following lines and ; modify the parameters to match your adapter configuration. ; Also modify the BINDINGS line in the protocol section to be ; BINDINGS = SMC8100_NIF, SMC8102_NIF ; ; IOBase = 0x280 for AT bus systems ; SlotNumber = 4 for Micro Channel systems ; ;[SMC8102_NIF] ; DriverName = SMC8100$ ; IOBase = 0x340 for AT bus systems ; SlotNumber = 6 for Micro Channel systems ;Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.