1. 8038D3A-1.zip Driver
2. WFW31.TXT File Contents

WFW31.TXT Driver File Contents (8038D3A-1.zip)

   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
   ³               Installation for Windows for Workgroups 3.1              ³
   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

   A. Software Requirements:

         o MS-DOS 5.0 or later with

             Microsoft Windows for Workgroups Versions 3.1.


   B. Installation with Microsoft Windows for Workgroups Version 3.1

      a.  Automatic installation using the Network Setup Program

          a) Select the Control Panel icon.

          b) Select the Network Program.

          c) Select <Adapter> option.

          d) Select <Remove> to remove the old adapter.

          e) Select <Add> to add the DC21X4-based adapter

          f) Select <Unlisted or Updated Network Adapter> and follow
             the Windows for Workgroups instructions, installing the
             driver from A:\NDIS2.

      b. Manual Installation for Windows for Workgroups 3.1

         If you do not wish to use network installation program
         'Network' from the Control Panel icon, you have to perform
         the following steps manually:

         a) Copy the DC21X4.DOS file from this kit to the Windows
            directory:

            <DRIVE>:\WINDOWS

         b) Add the following line to CONFIG.SYS

            DEVICE=<DRIVE>:\WINDOWS\DC21X4.DOS

         c) Modify your PROTOCOL.INI file using any DOS Editor by
             appending the PROTOCOL.INI stub (included with this kit)
             to the end of your old PROTOCOL.INI file.  The stub
             contains the following information:

                  [DC21X4]
                  DRIVERNAME=DC21X4$

         d) Modify the NETWORK.SETUP and MS$NETBEUI sections of your
             PROTOCOL.INI file as follows:

                  [network.setup]
                  version=0x3100
                  netcard=DC21X4,1,DC21X4
                  transport=ms$netbeui,MS$NETBEUI
                  lana0=DC21X4,1,ms$netbeui

                  [MS$NETBEUI]
                  DriverName=netbeui$
                  SESSIONS=6
                  NCBS=12
                  BINDINGS=DC21X4
                  LANABASE=0

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.