Windows NT 4.0
Introduction:
-------------
This document describes the procedure to install Windows NT v4.0
driver for PCI Ethernet adapter.
Location of Driver: \WINNT40\RTL8029.SYS
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
When you are in Windows NT 4.0:
1. In the "Network" option in Control Panel, click the "Adapters" Tab.
2. And then click "Add...", and then click "Have Disk...".
3. Insert the Realtek driver disk in drive A, enter drive and pathname
A:\WINNT40 which is the path where the driver RTL8029.SYS and
setup file OEMSETUP.INF are located, and then choose the OK button.
4. The screen will appear "Input EthernetID" dialog box which is
provided by RTL8029.SYS driver. This option is only required when
you have more than one PCI LAN adapters on this computer.
Select SKIP if only one adapter is installed on this computer.
5. NT will then perform the "Bindings Configuration" process. If any
additional network software options were installed, you may be
prompted for specific information for these packages.
6. Restarting your system you will acquire network service.
NOTES:
------
* Installing Multiple LAN Adapters:
Enter Windows NT and follow above setup procedure step 1,and then
click "Properties..." , and then the "Input Ethernet ID" dialog
box appears and input adapter's Ethernet ID. Last step to select
OK and close NETWORK SETUP.
Select SKIP if only one adapter is installed on this computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.