OCT 1996
Release Note for Plug&Play,Full-Duplex PCI Ethernet Card
========================================================
Thank you for purchasing the series Ethernet cards.
The driver programs in this diskette support all series Ethernet cards.
********************************************************************
* *
* The series Ethernet cards have on-board jumpers, or use *
* jumperless. All the hardware settings can be specified *
* through our SETUP.EXE program. Please run SETUP.EXE *
* program to set up and test the hardware configuration. *
* *
********************************************************************
The series Ethernet Card Setup/Diagnostic program
==================================================
The SETUP.EXE program (Setup/Diagnostic) lets you configure the hardware
settings, and test the state and cable connection of the card.
To run the program, insert the card's driver program diskette in drive
'A','B' and do the following:
> SETUP --run the SETUP.EXE program
Default values
======================
Mode PCI
Full-Duplex Disable
Connector Type Auto
I/O Base Address ( depend on mainboard's setting )
Interrupt Number ( INTA, depend on mainborad's setting )
ROM Size 16K
ROM Address ( depend on mainboard's setting )
+---------------------------------------------------------+
| KEYWORDS | AVAILABLE SELECTIONS |
+----------------------+----------------------------------+
| Connector Type | AUTO= UTP, BNC, AUI(Optional) |
+----------------------+----------------------------------+
| IRQ | INTA |
+----------------------+----------------------------------+
| I/O Base | Depend on mainboard's setting |
| | |
| Address | |
| | |
+----------------------+----------------------------------+
| Boot ROM Sizes | Base Memory |
+----------------------+----------------------------------+
| 8K/16K | Depending on mainboard's setting|
| | |
| | |
| | |
| 32K | |
| | |
| | |
| | |
+----------------------+----------------------------------+
*default value
Menu Options
============
1. SETUP.exe lets you configure the hardware settings.
You have the option to view :
<1> Node ID
<2> Operating Mode
<3> Card Type
<4> Connector Type
<5> I/O Base Address
<6> Interrupt Number
<7> Remote Boot ROM Size
2. DIAGNOSTIC lets you diagnose the state and cable connections.
****************************************
* THE DRIVER PROGRAMS IN THIS DISKETTE *
****************************************
The driver programs in this diskette is organized in the following manner.
It contains a help.exe file which provides you with detailed installation
instructions:
Directory Contents
---------- ---------------------------------------------------------
README.TXT This file.
DRIVER.TXT The NOS compatibility report.
SETUP.EXE The adapter's setup program.
HELP.EXE The NOS driver's installation instructions.
FILEPATH.LST For help.exe
MAINMENU.TXT For help.exe
\TXT For help.exe
\BOOTROM.RPL RPL BootROM for NOVELL, Windows NT, LAN Server, LAN Manager
INI & CNF files.
\LANTAS4 LanTastic V4.XX Driver program.
\LANTAS5 LanTastic V5.XX Driver program.
\MSLANMAN.DOS MicroSoft Lan Manager For DOS Driver Program.
\MSLANMAN.OS2 MicroSoft Lan Manager For OS2 Driver Program.
\NDIS NDIS Driver program.
\NWSERVER Novell Netware Server ODI v3.x, 4.x driver.
\NWCLIENT Novell NetWare client DOS&OS2 ODI driver.
\WFW31 MicroSoft Windows for Workgroups V3.1 driver program.
\WIN95 MicroSoft Win95 Driver Program.
\PKTDRV Packet Driver Program.
\SCO SCO UNIX driver program.
\WINNT31 MicroSoft Windows NT 3.1 driver program.
\WFW311 MicroSoft Windows for Workgroups 3.11 (NDIS 3.0).
\WINNT35 MicroSoft Windows NT 3.5 driver program.
\WINNT40 MicroSoft Windows NT 4.0 driver program.
***********************
* Technical Support *
***********************
For technical support, you may contact your authorized distributor,
dealer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.