[IntstallOptions]
Install_3NIC_Diag = "NO"
Install_Shortcuts = "NO"
Install_Installer = "NO"
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
PCI
"Jazz-Internal Bus"
[Options]
3C90X
3C905
3C900
[NDDriverConstantsNDIS3]
ND3NDNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xnd3.sys"
ND3NDProdSWImagePath = "%SystemRoot%\System32\drivers\el90xnd3.sys"
ND3NDProdSWUpgradePath = "\SystemRoot\System32\drivers\el90xnd3.sys"
[NDDriverConstantsNDIS4]
ND4NDNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xnd4.sys"
ND4NDProdSWImagePath = "%SystemRoot%\System32\drivers\el90xnd4.sys"
ND4NDProdSWUpgradePath = "\SystemRoot\System32\drivers\el90xnd4.sys"
[BCDriverConstantsNDIS3]
ND3BCNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xbc3.sys"
ND3BCProdSWImagePath = "%SystemRoot%\System32\drivers\el90xbc3.sys"
ND3BCProdSWUpgradePath = "\SystemRoot\System32\drivers\el90xbc3.sys"
[BCDriverConstantsNDIS4]
ND4BCNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\EL90xBC4.sys"
ND4BCProdSWImagePath = "%SystemRoot%\System32\drivers\EL90xBC4.sys"
ND4BCProdSWUpgradePath = "\SystemRoot\System32\drivers\EL90xBC4.sys"
;**************************************************************************************************
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SWType = "driver"
Exit_Code = 0
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
NetworkCardsKey = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"
FunctionTitle = "3Com 3C90x Adapter Card Setup"
3CNUMBER = "3C90X"
GROUP_NAME = "3Com EtherLink PCI NIC"
ProdHWXXXXXTitle = "3Com EtherLink PCI NIC "
ProdHWXXXXXDesc = "3Com EtherLink PCI NIC "
Manufacturer = "3Com"
EtherDiskVersion = "5.2"
ProdMajorVer = "1"
ProdMinorVer = "0"
ProdReview = "1"
ProdVer = $(ProdMajorVer)"."$(ProdMinorVer)
ProdSWDesc = "3Com 3C90x Adapter BC Driver"
ProdSWTitle = "3Com 3C90x Adapter BC Driver"
ProdSWName = "El90x"
NetRuleSWType = "El90xSys ndisDriver El90xDriver"
NetRuleSWUse = $(SWType)
NetRuleSWBindForm = """El90xSys"" yes no container"
NetRuleSWClass = {"El90xDriver basic"}
NetRuleSWBindable = {"El90xDriver El90xAdapter non exclusive 100"}
ProdHWName = "El90x"
NetRuleHWBindForm = " yes yes container"
NetRuleHWType = "El90x El90xAdapter"
NetRuleHWClass = {"El90xAdapter basic"}
ProdKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProdSWName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProdHWName)"\Parameters"
Hardware_Default = "HardwareDefault"
DiagExe = TCAUDIAG
NICPROP = NICPROP
DIAGCARDTYPE = "TCAUM90X"
TrayIconExe = TCAUDIAG
InstallerExe = TCAUDIAG
UnInstallerEXE = UN3C90XA
[BoomFileConstants]
NDProdSWDesc = "3Com 3C90x Adapter ND Driver"
NDProdSWTitle = "3Com 3C90x Adapter ND Driver"
NDProdSWName = "El90xnd"
NDNetRuleSWType = "El90xndSys ndisDriver El90xndDriver"
NDNetRuleSWBindForm = """El90xndSys"" yes no container"
NDNetRuleSWClass = {"El90xndDriver basic"}
NDNetRuleSWBindable = {"El90xndDriver El90xndAdapter non exclusive 100"}
NDProdHWName = "El90xnd"
NDNetRuleHWBindForm = " yes yes container"
NDNetRuleHWType = "El90xnd El90xndAdapter"
NDNetRuleHWClass = {"El90xndAdapter basic"}
NDProdKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(NDProdSWName)"\CurrentVersion"
NDParamKeyName = $(!NTN_ServiceBase)"\"$(NDProdHWName)"\Parameters"
;--------------------these NICs use old NDIS4 driver --------------------------------
ProdHW36944Title = "3Com EtherLink 10/100 PCI NIC (3C905-TX)"
ProdHW36944Desc = "3Com EtherLink 10/100 PCI NIC (3C905-TX)"
ProdHW36945Title = "3Com EtherLink 10/100 PCI T4 NIC (3C905-T4)"
ProdHW36945Desc = "3Com EtherLink 10/100 PCI T4 NIC (3C905-T4)"
ProdHW36864Title = "3Com EtherLink 10 PCI TPO NIC (3C900-TPO)"
ProdHW36864Desc = "3Com EtherLink 10 PCI TPO NIC (3C900-TPO)"
ProdHW36865Title = "3Com EtherLink 10 PCI Combo NIC (3C900-COMBO)"
ProdHW36865Desc = "3Com EtherLink 10 PCI Combo NIC (3C900-COMBO)"
;--------------------these NICs use new NDIS4 driver --------------------------------
ProdHW36952Title = "3Com EtherLink 10/100 PCI Combo NIC (3C905B-COMBO)"
ProdHW36952Desc = "3Com EtherLink 10/100 PCI Combo NIC (3C905B-COMBO)"
ProdHW37376Title = "3Com EtherLink 10/100 PCI NIC (3C905C-TX)"
ProdHW37376Desc = "3Com EtherLink 10/100 PCI For Complete PC Management NIC (3C905C-TX)"
ProdHW36949Title = "3Com EtherLink 10/100 PCI NIC (3C905B-TX)"
ProdHW36949Desc = "3Com EtherLink 10/100 PCI TX NIC (3C905B-TX)"
ProdHW36954Title = "3Com EtherLink 100 PCI Fiber NIC (3C905B-FX)"
ProdHW36954Desc = "3Com EtherLink 100 PCI Fiber NIC (3C905B-FX)"
ProdHW36868Title = "3Com EtherLink 10 PCI TPO NIC (3C900B-TPO)"
ProdHW36868Desc = "3Com EtherLink 10 PCI TPO NIC (3C900B-TPO)"
ProdHW36869Title = "3Com EtherLink 10 PCI Combo NIC (3C900B-COMBO)"
ProdHW36869Desc = "3Com EtherLink 10 PCI Combo NIC (3C900B-COMBO)"
ProdHW36870Title = "3Com EtherLink 10 PCI TPC NIC (3C900B-TPC)"
ProdHW36870Desc = "3Com EtherLink 10 PCI TPC NIC (3C900B-TPC)"
ProdHW36874Title = "3Com EtherLink 10 PCI Fiber NIC (3C900B-FL)"
ProdHW36874Desc = "3Com EtherLink 10 PCI Fiber NIC (3C900B-FL)"
;---- OLD NAMES OF 90XBC NICs, THESE NAMES USED FOR CHECKING IF THE NIC ALREADY INSTALLED
OLDProdHW36944Desc = "3Com Fast EtherLink XL 10/100Mb TX Ethernet NIC (3C905-TX)"
OLDProdHW36945Desc = "3Com Fast EtherLink XL 10/100Mb T4 Ethernet NIC (3C905-T4)"
OLDProdHW36949Desc = "3Com Fast EtherLink XL 10/100Mb TX Ethernet NIC (3C905B-TX)"
OLDProdHW36954Desc = "3Com Fast EtherLink XL 10/100Mb FX Ethernet NIC (3C905B-FX)"
OLDProdHW36864Desc = "3Com EtherLink XL TPO 10Mb Ethernet NIC (3C900-TPO)"
OLDProdHW36865Desc = "3Com EtherLink XL COMBO 10Mb Ethernet NIC (3C900-COMBO)"
OLDProdHW36868Desc = "3Com EtherLink XL TPO 10Mb Ethernet NIC (3C900B-TPO)"
OLDProdHW36869Desc = "3Com EtherLink XL COMBO 10Mb Ethernet NIC (3C900B-COMBO)"
OLDProdHW36870Desc = "3Com EtherLink XL TPC 10Mb Ethernet NIC (3C900B-TPC)"
OLDProdHW36874Desc = "3Com EtherLink XL FL 10Mb Ethernet NIC (3C900B-FL)"
OLDProdHW36952Desc = "3Com EtherLink XL COMBO 10/100Mb Ethernet NIC (3C905B-COMBO)"
; EtherDisk5.0 have diff. desc. for 10Mb cards, so we need to check that, too.
ED50HW36868Desc = "3Com EtherLink PCI TPO NIC (3C900B-TPO)"
ED50HW36864Desc = "3Com EtherLink PCI TPO NIC (3C900-TPO)"
ED50HW36865Desc = "3Com EtherLink PCI Combo NIC (3C900-COMBO)"
ED50HW36869Desc = "3Com EtherLink PCI Combo NIC (3C900B-COMBO)"
ED50HW36870Desc = "3Com EtherLink PCI TPC NIC (3C900B-TPC)"
ED50HW36874Desc = "3Com EtherLink PCI Fiber NIC (3C900B-FL)"
;------------------------------------------------------------------------------------------------
; List of NICs
CFIDList = {36944, 36945, 36864, 36865,36868, 36869, 36870, 36874, 36949, 36952, 36954, 37376}
AdapterType = 5
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
NT350VersionConstant = "3.50"
NT310VersionConstant = "3.10"
NT400VersionConstant = "(4.0)"
INF_PROCESSER = "I386"
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[checkFileExist]
DiagFound = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\tcaudiag.exe"
[DiagRegistry]
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTKEY
OpenRegKey $(SOFTKEY) "" "3Com" $(!REG_KEY_WRITE) COMKEY
ifstr $(COMKEY) == ""
CreateRegKey $(SOFTKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMKEY
endif
OpenRegKey $(COMKEY) "" "TCAUDIAG" $(!REG_KEY_WRITE) TCAUDIAGKEY
ifstr $(TCAUDIAGKEY) == ""
CreateRegKey $(COMKEY) {"TCAUDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TCAUDIAGKEY
endif
OpenRegKey $(TCAUDIAGKEY) "" "TCAUM90X" $(!REG_KEY_WRITE) TCAUM90XKEY
ifstr $(TCAUM90XKEY) == ""
CreateRegKey $(TCAUDIAGKEY) {"TCAUM90X", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TCAUM90XKEY
endif
SetRegValue $(TCAUM90XKEY) {"DriverNames", 0, $(!REG_VT_SZ), "3C90X.COM;EL90X.DOS;SYSTEM\EL90XND3.SYS;SYSTEM\EL90XND4.SYS;SYSTEM\EL90XBC4.SYS"}
OpenRegKey $(TCAUM90XKEY) "" "Extensions" $(!REG_KEY_WRITE) ExtensionsKEY
ifstr $(ExtensionsKEY) == ""
CreateRegKey $(TCAUM90XKEY) {"Extensions", 0, GenericClass} "" $(!REG_KEY_WRITE) "" ExtensionsKEY
endif
OpenRegKey $(ExtensionsKEY) "" "DA" $(!REG_KEY_WRITE) DAKEY
ifstr $(DAKEY) == ""
CreateRegKey $(ExtensionsKEY) {"DA", 0, GenericClass} "" $(!REG_KEY_WRITE) "" DAKEY
endif
CloseRegKey $(SOFTKEY)
CloseRegKey $(COMKEY)
CloseRegKey $(TCAUDIAGKEY)
CloseRegKey $(TCAUM90XKEY)
CloseRegKey $(ExtensionsKEY)
CloseRegKey $(DAKEY)
return
[InstallOption]
set CurrLang = $($0)
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms IntstallOptions
read-syms GeneralConstants
read-syms FileConstants
read-syms BoomFileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
;*********** add this to check correct platform supported********
ifstr(i) $(!STF_PLATFORM) == "Alpha"
set CommonStatus = STATUS_USERCANCEL
goto end
else-ifstr(i) $(!STF_PLATFORM) == "Alpha_AXP"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
;*****************************************************************
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
Debug-Output "$(InfFile) : WinNT CurrentVersion ="$(CurrentVersionValue)
CloseRegKey $(KeyNt)
Endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set NDIS_VER = NDIS4
else
set NDIS_VER = NDIS3
endif
read-syms BCDriverConstants$(NDIS_VER)
read-syms NDDriverConstants$(NDIS_VER)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant)
Debug-Output "$(InfFile) : Configureadapter"
set Error = "Windows NT v3.10 is not support by this product"
goto fatal
endif
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
ifstr $(!STF_PLATFORM) == $(INF_PROCESSER)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG\TCAUM90X" $(!REG_KEY_READ) TCAUDIAGKEY
ifstr $(TCAUDIAGKEY) != ""
detect checkFileExist
set Diag = *($(DiagFound), 1)
ifstr(i) $(Diag) == "tcaudiag.exe"
; UN-Block the spawning of TD-Diags upon the "Properties" event in the NCP
StartDetachedProcess ExitCode "Windows Directory" "" $(DiagExe).EXE
else
StartDetachedProcess ExitCode "Windows Directory" "" $(NICPROP).EXE $(!NTN_RegBase)
endif
CloseRegKey $(TCAUDIAGKEY)
else
StartDetachedProcess ExitCode "Windows Directory" "" $(NICPROP).EXE $(!NTN_RegBase)
endif
set CommonStatus = STATUS_USERCANCEL
goto end
else
set StartLabel = configureadapter
endif
else-Ifstr(i) $(ProdKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else-Ifstr(i) $(NDProdKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = configureadapter
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
Debug-Output "$(InfFile) : =================================================="
Debug-Output "$(InfFile) : STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "$(InfFile) : STF_SRCDIR is: "$(!STF_SRCDIR)
Debug-Output "$(InfFile) : STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "$(InfFile) : Option is: "$(Option)
Debug-Output "$(InfFile) : !STF_NCN_InstallMode is:"$(!NTN_InstallMode)
Debug-Output "$(InfFile) : !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "$(InfFile) : !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "$(InfFile) : !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "$(InfFile) : !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "$(InfFile) : !STF_GUI_UNATTENDED is: "$(!STF_GUI_UNATTENDED)
Debug-Output "$(InfFile) : !STF_BusType is $(!STF_BUSTYPE)"
Debug-Output "$(InfFile) : !STF_BusTypeList is $(!STF_BUSTYPELIST)"
Debug-Output "$(InfFile) : =================================================="
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
Debug-Output "$(InfFile) : Installadapter"
OpenRegKey $(!REG_H_LOCAL) "" $(ProdKeyName) $(!REG_KEY_READ) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProdKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
;********* add this because of 2 service names *******************************
OpenRegKey $(!REG_H_LOCAL) "" $(NDProdKeyName) $(!REG_KEY_READ) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(NDProdKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
set OldVersionExisted = $(TRUE)
endif
Endif
;*****************************************************************************
;;;set OldVersionExisted = $(TRUE)
endif
Endif
Goto adapteroptions
configureadapter = +
Debug-Output "$(InfFile) : Configureadapter"
set Error = "Cannot configure the software component"
goto fatal
adapteroptions = +
Debug-Output "$(InfFile) : Adapteroptions"
set from = adapteroptions
ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
endif
installproduct =+
install "Install-OTHER"
Debug-Output "$(InfFile) : installproduct"
StartWait
set AdapterList = $($R1)
Debug-Output "$(InfFile) : About to look for 3Com PCI Cards"
set TargetVersion = *($(CurrentVersionValue),4)
Debug-Output "$(InfFile) : Current Version:"$(TargetVersion)
ifstr $(TargetVersion) == $(NT350VersionConstant)
Debug-Output "Running on WindowsNT 3.50"
set Version350 = $(TRUE)
else
Debug-Output "Running on WindowsNT 3.51 or higher"
set Version350 = $(FALSE)
endif
ifint $(Version350) == $(TRUE)
Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!"
ifstr $(!STF_GUI_UNATTENDED) == "YES"
Debug-Output "$(InfFile) : Running in GUI unattended mode"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 5
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
set NTDetected = $(FALSE)
set AdapterList = {{$(Option),0, XXXXX}}
Debug-Output "$(InfFile) : BusInterfaceType = $(BusInterfaceType)"
Debug-Output "$(InfFile) : BusNumber = $(BusNumber)"
else ;;; GUI_UNATTENDED=NO
Debug-Output "$(InfFile) : Running 3.50 Bus Dialog"
set BusInterfaceType = 5
set BusNumber = 0
set NTDetected = $(FALSE)
Shell $(UtilityInf),GetBusTypeDialog,$(ProdHWXXXXXDesc) $(BusInterfaceType) $(BusNumber)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set BusInterfaceType = $($R1)
set BusNumber = $($R2)
set AdapterList = {{$(Option),0, XXXXX}}
Debug-Output "$(InfFile) : BusInterfaceType = $(BusInterfaceType)"
Debug-Output "$(InfFile) : BusNumber = $(BusNumber)"
endif ;;; end check GUI_UNATTENDED
else ;;; Version350=FALSE
Debug-Output "$(InfFile) : Running 3.51 or higher using PCI Dectection"
set NTDetected = $(TRUE)
set Vendor = 4279
set CFIDList = $(CFIDList)
Debug-Output "$(InfFile) : VendorID = $(Vendor)"
Debug-Output "$(InfFile) : CFIDList = $(CFIDList)"
set AdapterList = {}
ForListDo $(CFIDList)
set-div CFID = $($) 1
set DeviceID = $($)
Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ForListDo $($R0)
set AdapterList = >($(AdapterList), {*($($),1), *($($),2), $(DeviceID)})
EndForListDo
EndForListDo
ifstr(i) $(AdapterList) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
endif
set ToInstallList = {}
Debug-Output "$(InfFile) : Adapterlist = $(AdatperList)"
ForListDo $(AdapterList)
ifint $(NTDetected) == $(TRUE)
set DetectedBusNum = *($($),1)
set DetectedSlotNum = *($($),2)
set DeviceID = *($($),3)
Debug-Output "$(InfFile) : DetectedBusNumber = $(DetectedBusNum)"
Debug-Output "$(InfFile) : DetectedSlotNum = $(DetectedSlotNum)"
;**************** add this because of 2 Service names**************
set BoomCard = FALSE
ifstr(i) $(DeviceID) == "36944"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36945"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36864"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36865"
set BoomCard = TRUE
endif
ifstr(i) $(BoomCard) == TRUE
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProdHW$(DeviceID)Desc), "El90xnd"
ifstr(i) $($R1) != "YES"
goto AddToNotList
else
goto endchecking
endif
;we don't have to check old names for Boomerang because we don't allow update on Boomerang
;Update only allowed if Boom card has used new service name El90xnd.
;Ed5.0 and anything before that didn't use service name El90xnd.
else ; 90xBC CARD
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProdHW$(DeviceID)Desc), "El90x"
;**** DO THIS BECAUSE WE NOW USE NEW NAMES FOR OUR CARDS, CHECK OLD NAME
ifstr(i) $($R1) != "YES" ;not installed yet, not sure, check oldnames
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(OLDProdHW$(DeviceID)Desc), "El90x"
ifstr(i) $($R1) != "YES" ;not installed yet, still not sure because we changed desc twice before
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ED50HW$(DeviceID)Desc), "El90x"
ifstr(i) $($R1) != "YES" ;not installed yet, sure by now
goto AddToNotList
else ;already installed with old name on ED5.0
goto endchecking
endif
else ;already installed with old name on ED4.0 or before that
goto endchecking
endif
else ;already installed with current name on ECD5.1
goto endchecking
endif
endif
AddToNotList=+
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
;ifstr(i) $(ToInstallList) == {} ; COMMENT THIS OUT TO INSTALL MULTIPLE NIC at a time
ifstr(i) $($R1) != "YES"
set ToInstallList = >($(ToInstallList), $($))
endif
;endif
endchecking =+
endif
EndForListDo
ifstr(i) $(ToInstallList) == {}
set Error = $(CANNOT_FIND_ANY_UNINSTALLED_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
ForListDo $(ToInstallList)
set DetectedBusNum = *($($),1)
set DetectedSlotNum = *($($),2)
set DeviceID = *($($),3)
set BoomDetected = FALSE
set NonBoomDetected = FALSE
;********************************************************************
; Check if 90XBC or Boomerang
;********************************************************************
set BoomCard = FALSE
ifstr(i) $(DeviceID) == "36944"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36945"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36864"
set BoomCard = TRUE
else-ifstr(i) $(DeviceID) == "36865"
set BoomCard = TRUE
endif
ifstr(i) $(BoomCard) == TRUE
set CorrectProdHWName = $(NDProdHWName)
set CorrectProdSWName = $(NDProdSWName)
set CorrectNetRuleSWType = $(NDNetRuleSWType)
set CorrectNetRuleSWBindForm = $(NDNetRuleSWBindForm)
set CorrectNetRuleSWClass = $(NDNetRuleSWClass)
set CorrectNetRuleSWBindable = $(NDNetRuleSWBindable)
set CorrectNetRuleHWBindForm = $(NDNetRuleHWBindForm)
set CorrectNetRuleHWType = $(NDNetRuleHWType)
set CorrectNetRuleHWClass = $(NDNetRuleHWClass)
set CorrectProdKeyName = $(NDProdKeyName)
set CorrectParamKeyName = $(NDParamKeyName)
set CorrectProdSWDesc = $(NDProdSWDesc)
set CorrectProdSWTitle = $(NDProdSWTitle)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set CorrectNetEventDLL = $(ND4NDNetEventDLL)
set CorrectProdSWImagePath = $(ND4NDProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND4NDProdSWUpgradePath)
else
set CorrectNetEventDLL = $(ND3NDNetEventDLL)
set CorrectProdSWImagePath = $(ND3NDProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND3NDProdSWUpgradePath)
endif
else ; 90XBC CARD
set CorrectProdSWDesc = $(ProdSWDesc)
set CorrectProdSWTitle = $(ProdSWTitle)
set CorrectProdHWName = $(ProdHWName)
set CorrectProdSWName = $(ProdSWName)
set CorrectNetRuleSWType = $(NetRuleSWType)
set CorrectNetRuleSWBindForm = $(NetRuleSWBindForm)
set CorrectNetRuleSWClass = $(NetRuleSWClass)
set CorrectNetRuleSWBindable = $(NetRuleSWBindable)
set CorrectNetRuleHWBindForm = $(NetRuleHWBindForm)
set CorrectNetRuleHWType = $(NetRuleHWType)
set CorrectNetRuleHWClass = $(NetRuleHWClass)
set CorrectProdKeyName = $(ProdKeyName)
set CorrectParamKeyName = $(ParamKeyName)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set CorrectNetEventDLL = $(ND4BCNetEventDLL)
set CorrectProdSWImagePath = $(ND4BCProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND4BCProdSWUpgradePath)
else
set CorrectNetEventDLL = $(ND3BCNetEventDLL)
set CorrectProdSWImagePath = $(ND3BCProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND3BCProdSWUpgradePath)
endif
endif ; END CHECK CARD
;DEBUG:
; ifstr(i) $(BoomCard) == TRUE
; Set DlgText = "bOOM CARD"
; else
; Set DlgText = "90xbc CARD"
; endif
; Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
; Set DlgText = "firstDB "$(CorrectProdHWName)" "$(CorrectProdSWName)
; Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
; Set DlgText = $(CorrectProdKeyName)" "$(CorrectProdSWImagePath)
; Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
; Set DlgText = "Netevent "$(CorrectNetEventDLL)
; Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
;END DEBUG
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(CorrectProdHWName) $(!REG_KEY_READ) KeyNt
CloseRegKey $(KeyNt)
Ifstr(i) $(KeyNt) == "" ; Begin check Key=null
Debug-Output "$(InfFile) : AddSoftwareComponent"
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(CorrectProdSWName), +
$(CorrectProdSWName), +
$(CorrectProdSWTitle), $(STF_CONTEXTINFNAME), +
$(CorrectProdSWImagePath), "kernel", "NDIS", {}, "",+
$(CorrectNetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
;DEBUG:
; ifstr(i) $(BoomCard) == TRUE
; Set DlgText = "bOOM CARD"
; else
; Set DlgText = "90xbc CARD"
; endif
; Shell "Done Add Software comp to get keyhandle"
; Set DlgText = "firstDB "$(CorrectProdHWName)" "$(CorrectProdSWName)
;END DEBUG
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SWType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProdMajorVer)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProdMinorVer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWDesc)},+
{Review,$(NoTitle),$(!REG_VT_DWORD),$(ProdReview)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
{EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetRuleSWType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSWUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetRuleSWBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(CorrectNetRuleSWClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(CorrectNetRuleSWBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
;********** Add parameter for driver *************************
set WakeOnLan = YES
set WakeOnLink = NO
set ValueEnable = ENABLE
ifstr(i) $(BoomCard) == TRUE
Set NewValueList = {{WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLan)},+
{WakeOnLink,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLink)},+
{FLOWCONTROL,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}}
else
Set NewValueList = {{RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)},+
{FLOWCONTROL,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}}
endif
Shell $(UtilityInf), AddValueList, $(SoftParameterKey), $(NewValueList)
CreateRegKey $(SoftParameterKey) {"3CDefault" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) +
"" KeyNt2
;;;
Set ThisValueList = {RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(NDProdSWName) $(!REG_KEY_ALL_ACCESS) NDKeyNt
ifstr $(KeyNt2) != ""
SetRegValue $(KeyNt2 ) $("ThisValueList")
CloseRegKey $(KeyNt2 )
endif
;;;
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
;*************************************************************
endif ; end check Key=null
Debug-Output "$(InfFile) : DetectedBusNumber = $(DetectedBusNum)"
Debug-Output "$(InfFile) : DetectedSlotNum = $(DetectedSlotNum)"
Debug-Output "$(InfFile) : Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!"
Shell $(UtilityInf), AddHardwareComponent, $(CorrectProdHWName),$(STF_CONTEXTINFNAME),$(CorrectProdKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProdHW$(DeviceID)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProdHW$(DeviceID)Desc)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdHWName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
{EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)},+
}
; Workaround: Sometimes AddHardwareComponent can't return correct handle for HardNetCardKey
; We have to manually open the key using adapter number returned from AddHardwareComponent
; might have to do the same for HardParameterKey
OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardsKey)$($R4) $(!REG_KEY_SET_VALUE) HardNetCardKey
; end workaround
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;set RegistryErrorIndex = $($R0)
;Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
;EndWait
;goto fatalregistry
;endif
set BusTypeNum = 5
ifstr(i) $(DeviceID) == "36944"
set CardType = 0
else-ifstr(i) $(DeviceID) == "36945"
set CardType = 0
else-ifstr(i) $(DeviceID) == "36949"
set CardType = 0
else
set CardType = 2
endif
ifint $(NTDetected) == $(TRUE)
set BusNumber = $(DetectedBusNum)
set SlotNum = $(DetectedSlotNum)
set BusInterfaceType = $(BusTypeNum)
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{Slot,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}}
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Set NewValueList = {{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+
{Media,$(NoTitle),$(!REG_VT_SZ),$(Hardware_Default)}}
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
else ; NTDetected != TRUE
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{Media,$(NoTitle),$(!REG_VT_SZ),$(Hardware_Default)}}
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif ;
Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
}
Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf), AddDefaultNetcardParameters, $(HardParameterKey)
endif
set TempProdName = """"$(CorrectProdHWName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(CorrectNetRuleHWBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetRuleHWType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(CorrectNetRuleHWClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "$(InfFile) : HardwareRuleKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeEror
endif
;******************************************************************************************************************
;3CDefault
set ValueEnable = ENABLE
ifstr(i) $(BoomCard) == TRUE
Set ThisValueList = {{WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLan)},+
{WakeOnLink,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLink)},+
{FLOWCONTROL,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}}
else
Set ThisValueList = {{RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)},+
{FLOWCONTROL,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}}
endif
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(ThisValueList)
; Create 3CDefault key iff it's a non BOOM card since BOOM cards don't support Wake on Magic Packet
ifstr(i) $(BoomCard) == FALSE
CreateRegKey $(HardParameterKey) {"3CDefault" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) +
"" KeyNt2
Set ThisValueList = {RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}
SetRegValue $(KeyNt2) $("ThisValueList")
endif
;******************************************************************************************************************
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
CloseRegKey $(HardParameterKey)
ifstr(i) $(BoomCard) == FALSE
set NonBoomDetected = TRUE
goto endsequence
endif
ifstr(i) $(BoomCard) == TRUE
set BoomDetected = TRUE
endif
endsequence =+
;*******************************************
;* Driver History Information *
;* The following code adds Driver History *
;* Information to the system registry *
;*******************************************
; Driver Information Entries
; These items will be set by IHV...
Set DriverMfgr = "3Com Corporation" ; IHV name
Set DriverVersionID = "5.2.0.0" ; The IHV driver package version
Set BaseDriverFileName = "EL90XBC4.SYS" ; Key file for version check
Set BaseDriverFileVersion = "5.2.0.0" ; Version in Key file
; These items will be set to VENDOR values, and then set to OEM-specific by OEM
Set DriverOEM = "3Com Corporation" ; name of the OEM
Set DriverFamily = "NIC" ; device family (NIC, Storage, Video...)
Set DriverProduct = "???" ; Specific Name of device (chipset, for example)
Set DriverDescription = " Description - DriverInfo sample" ; Description of device (product name, OS or system supported)
Set DriverOEMVersion = "5.2.0.0" ; OEM-specified version
; This section is added to all INFs to add registry entries for Driver Info.
set DriverInfoRegList = {"InstalledOptions",$(DriverOEM),$(DriverFamily),$(DriverMfgr),$(DriverProduct)}
set DriverInfoKey = "SOFTWARE"
OpenRegKey $(!REG_H_LOCAL) "" $(DriverInfoKey) $(!REG_KEY_CREATE_SUB_KEY) DriverInfoOldKeyHandle
ifstr $(DriverInfoOldKeyHandle) == ""
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "DriverInfo registry failed. Could not open HKLM\Software ("$(RegLastError)")"
set DriverInfoFailed = "FAIL"
else
ForListDo $(DriverInfoRegList)
Set NewDriverInfoKey = $(DriverInfoKey)"\"$($)
OpenRegKey $(!REG_H_LOCAL) "" $(NewDriverInfoKey) $(!REG_KEY_ALL_ACCESS) DriverInfoKeyHandle
ifstr(i) $(DriverInfoKeyHandle) == ""
CreateRegKey $(DriverInfoOldKeyHandle) {$($),0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" DriverInfoKeyHandle
ifstr $(DriverInfoKeyHandle) == ""
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "DriverInfo registry failed. Could not create key:"$($)" ("$(RegLastError)")"
set DriverInfoFailed = "FAIL"
endif
endif
CloseRegKey $(DriverInfoOldKeyHandle)
set DriverInfoOldKeyHandle = $(DriverInfoKeyHandle)
set DriverInfoKey = $(NewDriverInfoKey)
EndForListDo
endif
ifstr $(DriverInfoFailed) != "FAIL"
SetRegValue $(DriverInfoKeyHandle) {"Description",0,$(!REG_VT_SZ),$(DriverDescription)}
SetRegValue $(DriverInfoKeyHandle) {"CurrentVer",0,$(!REG_VT_SZ),$(DriverOEMVersion)}
SetRegValue $(DriverInfoKeyHandle) {"Ver_"$(DriverOEMVersion),0,$(!REG_VT_SZ),$(DriverVersionID)}
SetRegValue $(DriverInfoKeyHandle) {" BaseDriverFileName",0,$(!REG_VT_SZ),$( BaseDriverFileName)}
SetRegValue $(DriverInfoKeyHandle) {" BaseDriverFileVersion",0,$(!REG_VT_SZ),$(BaseDriverFileVersion)}
CloseRegKey $(DriverInfoKeyHandle)
endif
;*******************************************
;* End of Driver History Information *
;***********************************************
; Paul May - 11/24/99 10:37am
;******* CREATE DIAG REGISTRY FOR TOUCHDOWN SINCE WE SUPPORT IT **************
; Place an instance in the registry for each instance of the Nic card
set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)}
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(CorrectProdSWName) $(!REG_KEY_ALL_ACCESS) NDKeyNt
ifstr $(NDKeyNt) != ""
SetRegValue $(NDKeyNt) $(TrayIconList)
CloseRegKey $(NDKeyNt)
endif
EndForListDo
set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)}
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG" $(!REG_KEY_ALL_ACCESS) NDKeyNt
ifstr $(NDKeyNt) == ""
CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\3Com\TCAUDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" NDKeyNt
endif
SetRegValue $(NDKeyNt) $(TrayIconList)
CloseRegKey $(NDKeyNt)
; Paul May - 12/08/99 6:27pm
;;; Add in entries to support the DA/Touchdown integration - REALNICS Key
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG\RealNICs" $(!REG_KEY_ALL_ACCESS) RealNICsKey
Ifstr(i) $(RealNICsKey) == "" ; key doesn't exist so create it
CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\3Com\TCAUDIAG\RealNICs", 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" RealNICsKey
endif
Ifstr(i) $(RealNICsKey) != "" ; key exists
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services" $(!REG_KEY_ALL_ACCESS) ServicesKey
Ifstr(i) $(ServicesKey) != "" ; key exists
EnumRegKey $(ServicesKey) DriverList
ForListDo $(DriverList)
;;; Check whether any python driver instances are present still
;;; If not, remove Touchdown and delete some leftover files
set foundPythonInstance = FALSE
set Driver = *($($), 1)
Split-String "$(Driver)" "N" DriverTokens
set DriverName = *($(DriverTokens), 1)
ifstr(i) $(Driver) != "El980n4"
ifstr(i) $(DriverName) == "El980"
;;; We have found a Python-related key
set foundPythonInstance = TRUE
endif
endif
ifstr(i) $(Driver) != "El98xn4"
ifstr(i) $(DriverName) == "El98x"
;;; We have found a Python-related key
set foundPythonInstance = TRUE
endif
endif
Ifstr(i) $(foundPythonInstance) == "TRUE"
;; Add this driver instance name to the list of realNICs
SetRegValue $(RealNICsKey) {$(Driver), 0, $(!REG_VT_SZ), ""}
endif
set found3ComClientInstance = FALSE
Split-String "$(Driver)" "x" DriverTokens
set DriverName = *($(DriverTokens), 1)
ifstr(i) $(Driver) != "El90x"
ifstr(i) $(DriverName) == "El90"
;;; We have found a 3Com client-related key
set found3ComClientInstance = TRUE
endif
endif
Split-String "$(Driver)" "d" DriverTokens
set DriverName = *($(DriverTokens), 1)
ifstr(i) $(Driver) != "El90xnd"
ifstr(i) $(DriverName) == "El90xn"
;;; We have found a 3Com client-related key
set found3ComClientInstance = TRUE
endif
endif
Split-String "$(Driver)" "x" DriverTokens
set DriverName = *($(DriverTokens), 1)
ifstr(i) $(Driver) != "EL99X"
ifstr(i) $(DriverName) == "El99"
;;; We have found a 3Com client-related key
set found3ComClientInstance = TRUE
endif
endif
Ifstr(i) $(found3ComClientInstance) == "TRUE"
;; Add this driver instance name to the list of realNICs
SetRegValue $(RealNICsKey) {$(Driver), 0, $(!REG_VT_SZ), ""}
endif
EndForListDo
CloseRegKey $(ServicesKey)
Endif
Endif
CloseRegKey $(DiagKey)
CloseRegKey $(RealNICsKey)
;End - Add in entries to support the DA/Touchdown integration - REALNICS Key
;;ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(CorrectProdHWName) $(!REG_KEY_ALL_ACCESS) KeyService
Ifstr $(KeyService) != ""
SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWUpgradePath)}
else
goto fatalregistry
endif
CloseRegKey $(KeyService)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(CorrectProdHWName) $(!REG_KEY_ALL_ACCESS) KeyEventLog
Ifstr $(KeyEventLog) != ""
SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetEventDLL)}
else
goto fatalregistry
endif
CloseRegKey $(KeyEventLog)
;;endif
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
endif
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Endif
;******* CREATE DIAG REGISTRY FOR TOUCHDOWN SINCE WE SUPPORT IT **************
set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)}
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG" $(!REG_KEY_ALL_ACCESS) NDKeyNt
ifstr $(NDKeyNt) != ""
SetRegValue $(NDKeyNt) $(TrayIconList)
CloseRegKey $(NDKeyNt)
endif
;******************************************************************************************
NextCommon =+
;******************************************************************************************
; *** All responsibilityies related to the Diags are governed by the Master Navigator. Section below
; becomes redundant
;install "Install-Uninstaller"
;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) +
;KeyNt
;set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)}
;SetRegValue $(KeyNt) $(TrayIconList)
;CloseRegKey $(KeyNt)
; ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
;
; ifstr $(Install_3NIC_Diag) == "YES"
; RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-upgrade"
; OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" +
; $(!REG_KEY_ALL_ACCESS) KeyNt
;
; ifstr $(KeyNt) == ""
; CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall", +
; 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt
; endif
;
; OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2
;
; ifstr $(KeyNt2) == ""
; CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) +
; "" KeyNt2
; endif
;
; set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ), "3Com NIC Diagnostics"}, +
; {UninstallString, $(NoTitle), $(!REG_VT_SZ), $(UnInstallerEXE).EXE}}
;
; Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList)
;
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; goto ShellCodeError
; endif
;
; CloseRegKey $(KeyNt)
; CloseRegKey $(KeyNt2)
;
; endif
; endif
;ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
;$(!REG_KEY_ALL_ACCESS) KeyNt
;set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"}
;DeleteRegValue $(KeyNt) "COMSMDEXE"
;SetRegValue $(KeyNt) $(TrayIconList)
;CloseRegKey $(KeyNt)
;ifstr $(Install_3NIC_Diag) == "YES"
;Debug-Output "$(InfFile) : (Install_3NIC_Diag) == "YES""
; Shell "", DiagRegistry
; ***
;install "Install-3nicdiag"
;ifstr $(Install_Installer) == "YES"
; ifstr(i) $(!STF_GUI_UNATTENDED) != "YES"
; ForListDo $(ToInstallList)
; set BusNum = *($($),1)
; set SlotNum = *($($),2)
; RunProgram ExitCode "Windows Directory" "" $(InstallerExe).EXE +
; "cardtype=TCAUM90X" "bus="$(BusNum) "slot="$(SlotNum)
; EndForListDo
; endif
;endif
;set SRCDIR_OVERRIDE_Save = $(!STF_SRCDIR_OVERRIDE)
;set !STF_SRCDIR_OVERRIDE = $(SrcDir)
;Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF, InstallOption, $(CurrLang),+
;"TCAITDI" ,$(SrcDir), YES, YES, YES, NO
;set !STF_SRCDIR_OVERRIDE = $(SRCDIR_OVERRIDE_Save)
;ifstr(i) $(Install_Shortcuts) == "YES"
;Debug-Output "$(InfFile) : (Install_Shortcuts) == "YES""
; *** Responsilibity of the MasterNavigator ***
;RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-setup"
;Debug-Output "$(InfFile) : Enabling Tray Icon"
;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
; $(!REG_KEY_ALL_ACCESS) KeyNt
;set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"}
;SetRegValue $(KeyNt) $(TrayIconList)
;DeleteRegValue $(KeyNt) "COMSMDEXE"
;CloseRegKey $(KeyNt)
;endif
;endif
;endif
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Endif
;**************** check if 905BC and copy new NDIS4 driver ********************
ifstr(i) $(NonBoomDetected) == TRUE
install "Install-OptionNewNDIS"
endif
ifstr(i) $(BoomDetected) == TRUE
goto oldndis
endif
oldndis =+
install "Install-Option"
endcurrent =+
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
EndWait
goto successful
updateparameters =+
Debug-Output "$(InfFile) : Updateparameters"
set HardParameterKey = $($R3)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyParameters)
goto successful
bindingadapter =+
Debug-Output "$(InfFile) : bindingadapter"
Return STATUS_SUCCESSFUL
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
;****************************************************************************************
; Check if 905BC or Boomerang
;****************************************************************************************
set BoomCard = FALSE
set CurrentCardPath = $(!NTN_RegBase)
set TitleValue = ""
set CardTitle = ""
set NameTokenList = ""
OpenRegKey $(!REG_H_LOCAL) "" $(CurrentCardPath) $(!REG_KEY_READ) CurrentCardKey
Ifstr(i) $(CurrentCardKey) != ""
GetRegValue $(CurrentCardKey) "Title" TitleValue
set CardTitle = *($(TitleValue), 4)
Split-String $(CardTitle) "()" NameTokenList
set NameCode = *($(NameTokenList), 3)
Ifstr(i) $(NameCode) == "3C905-TX"
set BoomCard = TRUE
Else-Ifstr(i) $(NameCode) == "3C905-T4"
set BoomCard = TRUE
Else-Ifstr(i) $(NameCode) == "3C900-TPO"
set BoomCard = TRUE
Else-Ifstr(i) $(NameCode) == "3C900-COMBO"
set BoomCard = TRUE
endif
CloseRegKey $(CurrentCardKey)
Endif ;end checking currentCardKey
;****************************************************************************************
ifstr(i) $(BoomCard) == TRUE
set CorrectProdHWName = $(NDProdHWName)
set CorrectProdSWName = $(NDProdSWName)
set CorrectProdKeyName = $(NDProdKeyName)
else
set CorrectProdHWName = $(ProdHWName)
set CorrectProdSWName = $(ProdSWName)
set CorrectProdKeyName = $(ProdKeyName)
endif
Debug-Output "$(InfFile) : removeadapter"
Debug-Output "$(InfFile) : ----> $(CorrectProdKeyName), $(!NTN_RegBase)"
Ifstr(i) $(CorrectProdKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(CorrectProdSWName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
; Paul May - 12/04/99 10:01am
; Populate Driver Instance
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(!REG_KEY_ALL_ACCESS) CardIndexKey
Ifstr(i) $(CardIndexKey) != "" ; key exists
GetRegValue $(CardIndexKey) "ServiceName" ServiceNameList
;;; The name of the service being removed is stored in DriverInstance
set DriverInstance = *($(ServiceNameList), 4)
endif
CloseRegKey $(CardIndexKey)
; End - Populate Driver Instance
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(CorrectProdSWName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSER)
; *** Responsilibity of the MasterNavigator ***
; RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-inf"
endif
; Paul May - 12/04/99 9:35am
;;; Remove the Service Name held in DriverInstance from the RealNICs key
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG\RealNICs" $(!REG_KEY_ALL_ACCESS) RealNICsKey
Ifstr(i) $(RealNICsKey) != "" ; key exists
EnumRegValue $(RealNICsKey) RealNICsList
set RealNICsValues = {}
ForListDo $(RealNICsList)
set RealNICsArray = *($($), 1)
ForListDo $(RealNICsArray)
set DriverInstanceName = *($($), 1)
QueryListSize RealNICsValuesSize $(RealNICsValues)
ifstr(i) $(RealNICsValuesSize) == 0
set RealNICsValues = {$(DriverInstanceName)}
else
set RealNICsValues = >($(RealNICsValues), $(DriverInstanceName))
endif
EndForListDo
EndForListDo
set NewRealNICsValues = {}
ForListDo $(RealNICsValues)
ifstr(i) *($($), 1) != $(DriverInstance)
set NewRealNICsValues = >($(NewRealNICsValues), *($($), 1))
endif
EndForListDo
CloseRegKey $(DiagKey)
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG" $(!REG_KEY_ALL_ACCESS) DiagKey
Ifstr(i) $(DiagKey) != "" ; key exists
DeleteRegTree $(DiagKey) "RealNICs"
CreateRegKey $(DiagKey) {"RealNICs", 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" NewRealNICsKey
Ifstr(i) $(NewRealNICsKey) != "" ; key exists
ForListDo $(NewRealNICsValues)
SetRegValue $(NewRealNICsKey) {*($($), 1), 0, $(!REG_VT_SZ), ""}
EndForListDo
Endif
Endif
Endif
CloseRegKey $(NewRealNICsKey)
CloseRegKey $(RealNICsKey)
CloseRegKey $(DiagKey)
; End Remove the Service Name held in DriverInstance from the RealNICs key
goto end
UpgradeSoftware = +
;****************************************************************************************
; Check if 90xBC or Boomerang
;****************************************************************************************
set BoomCard = FALSE
set CurrentCardPath = $(!NTN_RegBase)
set TitleValue = ""
set CardTitle = ""
set NameTokenList = ""
OpenRegKey $(!REG_H_LOCAL) "" $(CurrentCardPath) $(!REG_KEY_READ) CurrentCardKey
Ifstr(i) $(CurrentCardKey) != ""
GetRegValue $(CurrentCardKey) "Title" TitleValue
set CardTitle = *($(TitleValue), 4)
Split-String $(CardTitle) "()" NameTokenList
set NameCode = *($(NameTokenList), 3)
Ifstr(i) $(NameCode) == "3C905-TX"
set BoomCard = TRUE
Else-Ifstr(i) $(NameCode) == "3C905-T4"
set BoomCard = TRUE
Else-Ifstr(i) $(NameCode) == "3C900-TPO"
set BoomCard = TRUE
Else-Ifstr(i) $(NameCode) == "3C900-COMBO"
set BoomCard = TRUE
Else-Ifstr(i) $(NameCode) == "3C905" ; name in oemsetup.inf provided by Microsoft
set BoomCard = TRUE
endif
CloseRegKey $(CurrentCardKey)
Endif ;end checking currentCardKey
ifstr(i) $(BoomCard) == TRUE ; BOOM CARD
;****************************************************************************************
; ONLY SUPPORT BOOMERANG UPDATE WHEN IT HAD NEW SERVICE NAME EL90XND IN THE REGISTRY
;****************************************************************************************
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\El90xnd" $(!REG_KEY_ALL_ACCESS) KeyService
Ifstr $(KeyService) == ""
Set DlgText = "UPDATE not supported. Please remove this NIC and reinstall it"
Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
goto end
endif
CloseRegKey $(KeyService)
set CorrectProdHWName = $(NDProdHWName)
set CorrectProdSWName = $(NDProdSWName)
set CorrectNetRuleSWType = $(NDNetRuleSWType)
set CorrectNetRuleSWBindForm = $(NDNetRuleSWBindForm)
set CorrectNetRuleSWClass = $(NDNetRuleSWClass)
set CorrectNetRuleSWBindable = $(NDNetRuleSWBindable)
set CorrectNetRuleHWBindForm = $(NDNetRuleHWBindForm)
set CorrectNetRuleHWType = $(NDNetRuleHWType)
set CorrectNetRuleHWClass = $(NDNetRuleHWClass)
set CorrectProdKeyName = $(NDProdKeyName)
set CorrectParamKeyName = $(NDParamKeyName)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set CorrectNetEventDLL = $(ND4NDNetEventDLL)
set CorrectProdSWImagePath = $(ND4NDProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND4NDProdSWUpgradePath)
else
set CorrectNetEventDLL = $(ND3NDNetEventDLL)
set CorrectProdSWImagePath = $(ND3NDProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND3NDProdSWUpgradePath)
endif
else ; 90XBC CARD
set CorrectProdHWName = $(ProdHWName)
set CorrectProdSWName = $(ProdSWName)
set CorrectNetRuleSWType = $(NetRuleSWType)
set CorrectNetRuleSWBindForm = $(NetRuleSWBindForm)
set CorrectNetRuleSWClass = $(NetRuleSWClass)
set CorrectNetRuleSWBindable = $(NetRuleSWBindable)
set CorrectNetRuleHWBindForm = $(NetRuleHWBindForm)
set CorrectNetRuleHWType = $(NetRuleHWType)
set CorrectNetRuleHWClass = $(NetRuleHWClass)
set CorrectProdKeyName = $(ProdKeyName)
set CorrectParamKeyName = $(ParamKeyName)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
set CorrectNetEventDLL = $(ND4BCNetEventDLL)
set CorrectProdSWImagePath = $(ND4BCProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND4BCProdSWUpgradePath)
else
set CorrectNetEventDLL = $(ND3BCNetEventDLL)
set CorrectProdSWImagePath = $(ND3BCProdSWImagePath)
set CorrectProdSWUpgradePath = $(ND3BCProdSWUpgradePath)
endif
endif ; END CHECK CARD
;****************************************************************************************
OpenRegKey $(!REG_H_LOCAL) "" $(CorrectProdKeyName) $(!REG_KEY_ALL_ACCESS) KeyProduct
Ifstr $(KeyProduct) != ""
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-INF"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProdMajorVer)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProdMinorVer)}
SetRegValue $(KeyProduct) {Review,$(NoTitle),$(!REG_VT_DWORD),$(ProdReview)}
SetRegValue $(KeyProduct) {EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)}
CloseRegKey $(KeyProduct)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(CorrectProdHWName) $(!REG_KEY_ALL_ACCESS) KeyService
Ifstr $(KeyService) != ""
SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWUpgradePath)}
else
goto fatalregistry
endif
CloseRegKey $(KeyService)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(CorrectProdHWName) $(!REG_KEY_ALL_ACCESS) KeyEventLog
Ifstr $(KeyEventLog) != ""
SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetEventDLL)}
else
goto fatalregistry
endif
CloseRegKey $(KeyEventLog)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase) $(!REG_KEY_ALL_ACCESS) KeyNt
;******************************************************************************************************************
;Paul May 10/8/99
;Update Loop
set ValueEnable = ENABLE
set Count = "0"
set MaxLoop = "128"
Begin_Upgrade_Loop =+
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) WARNING "Count equals "$(Count)
OpenRegKey $(KeyNt) "" $(CorrectProdHWName)$(Count)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey
ifstr $(TestKey) != $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardsKey)$(Count)"\NetRules" $(!REG_KEY_ALL_ACCESS) NetCardKey
ifstr $(NetCardKey) != $(KeyNull)
SetRegValue $(NetCardKey) {"InfName",$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)}
CloseRegKey $(NetCardKey)
else
goto Emergency_Out
endif
CloseRegKey $(TestKey)
endif
;Increment Loop counter then compare against maximum allowed value
set-add Count = $(Count),"1"
ifstr(i) $(Count) == $(MaxLoop)
goto Emergency_Out
else
goto Begin_Upgrade_Loop
endif
;******************************************************************************************************************
Emergency_Out =+
else
goto fatalregistry
endif
;endif
ifstr(i) $(BoomCard) == FALSE
;install "Install-3nicdiag"
install "Install-OptionNewNDIS"
goto laststep
else
goto upgradeOldNDIS;
endif
upgradeOldNDIS =+
ifstr $(!STF_PLATFORM) == $(INF_PROCESSER)
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
;$(!REG_KEY_ALL_ACCESS) KeyNt
;set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"}
;SetRegValue $(KeyNt) $(TrayIconList)
;DeleteRegValue $(KeyNt) "COMSMDEXE"
;CloseRegKey $(KeyNt)
ifstr $(Install_3NIC_Diag) == "YES"
Debug-Output "$(InfFile) : (Install_3NIC_Diag) == "YES""
; Shell "", DiagRegistry
; ***
;install "Install-3nicdiag"
set InstallMode_Save = $(!NTN_InstallMode)
set !NTN_InstallMode = install
set SRCDIR_OVERRIDE_Save = $(!STF_SRCDIR_OVERRIDE)
set !STF_SRCDIR_OVERRIDE = $(SrcDir)
Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF, InstallOption, $(CurrLang), +
"TCAITDI" ,$(SrcDir), YES, YES, YES, NO
set !NTN_InstallMode = $(InstallMode_Save)
set !STF_SRCDIR_OVERRIDE = $(SRCDIR_OVERRIDE_Save)
ifstr(i) $(Install_Shortcuts) == "YES"
Debug-Output "$(InfFile) : (Install_Shortcuts) == "YES""
; *** Responsilibity of the MasterNavigator ***
; RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-setup"
;Debug-Output "$(InfFile) : Enabling Tray Icon"
;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
;$(!REG_KEY_ALL_ACCESS) KeyNt
;set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"}
;SetRegValue $(KeyNt) $(TrayIconList)
;DeleteRegValue $(KeyNt) "COMSMDEXE"
;CloseRegKey $(KeyNt)
endif
endif
endif
endif
;********************************************************************************
install "Install-Option"
;*********************************************************************************
laststep =+
;*********************************************************************************
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
; *** Responsilibity of the MasterNavigator ***
; RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-upgrade"
goto end
successful = +
Debug-Output "$(InfFile) : Successful"
goto end
abandon = +
Debug-Output "$(InfFile) : Abandon"
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(CorrectProdSWName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(CorrectProdSWName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
detect checkFileExist
set Uninst = *($(uninstFound), 1)
; *** Responsilibity of the MasterNavigator ***
;ifstr(i) $(Uninst) == "un3c90xa.exe"
; ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSER)
; RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-inf"
; endif
;endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Debug-Output "$(InfFile) : warning"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Debug-Output "$(InfFile) : nonfatalinfo"
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Debug-Output "$(InfFile) : nonfatal"
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
Debug-Output "$(InfFile) : nonfatalmsg"
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "RemoveAdapter"
endif
fatalregistry = +
Debug-Output "$(InfFile) : fatalregistry"
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fatal = +
Debug-Output "$(InfFile) : fatal"
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
ifint $($ShellCode) == $(!SHELL_CODE_NO_SUCH_INF)
Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_NO_SUCH_INF"
else-ifint $($ShellCode) == $(!SHELL_CODE_NO_SUCH_SECTION)
Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_NO_SUCH_SECTION"
else
Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_ERROR"
endif
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
Debug-Output "$(InfFile) : Setfailed"
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[checkFileExist]
uninstFound = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\un3c90xa.exe"
DiagFound = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\tcaudiag.exe"
[Install-Option]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
Debug-Output $(InfName)"Adding files: Files-$(NDIS_VER), SrcDir=$(SrcDir)"
AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
; DA installationn is now the responsibility of the Master Navigator
; ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
; AddSectionFilesToCopyList Files-DA $(SrcDir) $(!STF_WINDOWSSYSPATH)
; endif
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
;***********************************************************************************
[Install-OptionNewNDIS]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
Debug-Output $(InfName)"Adding files: Files-$(NDIS_VER), SrcDir=$(SrcDir)"
AddSectionFilesToCopyList Files-905BC$(NDIS_VER) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
;**************************************************************************************
[Install-3nicdiag]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-3nicdiag $(SrcDir) $(!STF_WINDOWSSYSPATH)
;AddSectionFilesToCopyList Files-Cpl $(SrcDir) $(!STF_WINDOWSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-INF]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-Uninstaller]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Uninstaller $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-OTHER]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-OTHER $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Source Media Descriptions]
1 = "ECD520P90X"
[ProductType]
STF_PRODUCT = Winnt
[Files-Inf]
1, oemsetup.inf,SIZE=36000, RENAME=$(!UG_Filename)
[Files-905BCNDIS3]
1,EL90xBC3.SYS , SIZE=25001
[Files-905BCNDIS4]
1,EL90xBC4.SYS , SIZE=25001
[Files-NDIS3]
1,EL90xnd3.SYS , SIZE=25001
[Files-NDIS4]
1,EL90xnd4.SYS , SIZE=25001
[Files-3nicdiag]
1,TCAUDIAG.EXE, SIZE=165504
1,TCAUDIAG.URL, SIZE=15
1,TCAUDIAG.HLP, SIZE=20877
1,TCAUPROT.HLP, SIZE=20877
1,TCAUM90X.HLP, SIZE=20877
1,TCAUDCUS.TXT, SIZE=113
1,TCAUDEXP.TXT, SIZE=113
1,TCAUPROT.DLL, SIZE=12345
1,TCAUM90X.DLL, SIZE=12345
1,TCAMHWAC.DLL, SIZE=20198
1,TCAICCHG.SYS, SIZE=5000
1,TCAITDI.INF, SIZE=15000
[Files-DA]
1,DAINST.EXE, SIZE=800000
[Files-Uninstaller]
1,UN3C90XA.EXE, SIZE=6617
[Files-OTHER]
1, Nicprop.exe,SIZE=24000
[LanguagesSupported]
ENG
[OptionsTextENG]
3C90X = "3Com EtherLink PCI NIC"
[FileConstantsENG]
ProCaption = "Windows NT NIC Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
ConnectionList = ^(ConnectionChoices, 1)
ConnectionValues = ^(ConnectionChoices, 2)
NoList = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
ShellCodeErrorText = "Shell Code Error."
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
CANNOT_FIND_ANY_UNINSTALLED_CARD = "All the NICs supported by this product have already been installed."
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
;(%VER OEMSETUP.INF - Installation file for 3C90X - v5.2.10 Root)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.