Installation of Modems with Moschip USB Serial Hardware:
============================================================
Procedure for installing Modems with Moschip USB-Serial Port
(MCS7710/MCS7715/MCS7717/MCS7720):
-----------------------------------------------------------------
a. Connect the modem to the Moschip USB Serial port and
turn ON the power supply to the Modem.
b. Plug in the MOSCHIP USB Serial hardware in the Host Computer.
c. Follow the setup instructions mentioned in the "Installation.notes"
to install the drivers required for the Moschip USB Serial Hardware.
d. After installing the drivers, Windows should detect the Modem connected
and automatically display a "Add New Hardware Wizard".
e. Click "Next" to continue.
f. Select "Display a list of all the drivers in a specific location ..."
option (radio button) and click "Next" to continue.
g. Wizard displays a list of appropriate Manufacturer and Model of different
modems. Select an appropriate option if it is present in the list.
If it is not in the list, click "Have Disk" button on the Wizard
and select the location where appropriate drivers for Modem are located.
h. Click "Next" to continue.
i. At the next dialog, Windows should display an additional dialog box, saying
"Windows is now ready to install the selected driver for this device.
Click Back to select a different driver or Click Next to continue."
Click "Next" to continue.
j. Windows searches and installs the selected drivers and displays a dialog
saying it has finished installing the Drivers.
k. Click "Finish" to complete the installation.
Check Modem Installation.
------------------------------
a. Open the Windows Device Manager
i) Right-Click the "My Computer" icon on the Desktop.
ii) Select "Properties" from the drop-down menu.
iii) Click the "Hardware" tab.
iv) Click the "Device Manager" button to show the current Hardware list.
b. Confirm that the Modem has been installed
In Modem Category newly connected Modem should be displayed.
What if the MOSCHIP USB Serial device is already installed and
Modem is connected to the MOSCHIP USB serial port later?
--------------------------------------------------------------
a. Open the Windows Device Manager
i) Right-Click the "My Computer" icon on the Desktop.
ii) Select "Properties" from the drop-down menu.
iii) Click the "Hardware" tab.
iv) Click the "Device Manager" button to show the current Hardware list.
b. Press the "Refresh" button for the newly connected Modem to be listed.
c. Windows should detect the Modem connected and automatically display a
"Add New Hardware Wizard".
d. Click "Next" to continue.
e. Select "Display a list of all the drivers in a specific location ..."
option and click "Next" to continue.
f. Wizard displays a list of appropriate Manufacturer and Model of different
modems. Select an appropriate option if it is present in the list.
If it is not in the list, click "Have Disk" button on the Wizard
and select the location where appropriate drivers for Modem are located.
g. Click "Next" to continue.
h. At the next dialog, Windows should display an additional dialog box, saying
"Windows is now ready to install the selected driver for this device.
Click Back to select a different driver or Click Next to continue."
Click "Next" to continue.
i. Windows searches and installs the selected drivers and displays a dialog
saying it has finished installing the Drivers.
j. Click "Finish" to complete the installation.
Note: When Modem is connected and the "Refresh" button is pressed, If windows
does not display a "Add New Hardware Wizard" press "Refresh" two to theree
times and try.
With Windows-ME operating system, On system reboot Operating system doesn't
enumerate the MODEM(s) which connected to the MosChip Serial Port(s) and
Device Manager shows the "MosChip USB Serial Port" with the "disabled" icon.
Press "Refresh" button, so that operating system will enumerate the MODEM(s)
and Device Manager shows the "MosChip USB Serial Port" with the proper icon.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.