fdditsm.txt Driver File Contents (novell-lancomp-devel-2004.10.05-1windows.zip)

/*--------------------------------------------------------------------------*
*  Copyright Unpublished Work of Novell, Inc. All Rights Reserved
*
*  THIS WORK IS AN UNPUBLISHED WORK AND CONTAINS CONFIDENTIAL,
*  PROPRIETARY AND TRADE SECRET INFORMATION OF NOVELL, INC.
*  ACCESS TO THIS WORK IS RESTRICTED TO (I) NOVELL EMPLOYEES
*  WHO HAVE A NEED TO KNOW TO PERFORM TASKS WITHIN THE SCOPE
*  OF THEIR ASSIGNMENTS AND (ii) ENTITIES OTHER THAN NOVELL
*  WHO HAVE ENTERED INTO APPROPRIATE LICENSE AGREEMENTS.
*  NO PART OF THIS WORK MAY BE USED, PRACTICED, PERFORMED, COPIED,
*  DISTRIBUTED, REVISED, MODIFIED, TRANSLATED, ABRIDGED,
*  CONDENSED, EXPANDED, COLLECTED, COMPILED, LINKED, RECAST,
*  TRANSFORMED OR ADAPTED WITHOUT THE PRIOR WRITTEN CONSENT OF
*  NOVELL.  ANY USE OR EXPLOITATION OF THIS WORK WITHOUT AUTHORIZATION
*  COULD SUBJECT THE PERPETRATOR TO CRIMINAL AND CIVIL LIABILITY.
*--------------------------------------------------------------------------*/
/*****************************************************************************
*
* Title:		NetWare FDDI Topology Specific Module C interface Support.
*
* Filename:		fdditsm.txt
*
* ODI Spec Ver:	1.11
*
* Description:	Message File for the FDDITSM.NLM file.
*
* Modification History:
*
* 01-07-98 WTT	Added 1998 to copyright string and changed version 
*					to 1.05.
*
****************************************************************************/

#define	FDDITSM_FRAME_8022_TXTMSG   	TxtMSG("FDDI_802.2", 1)

#define	FDDITSM_FRAME_SNAP_TXTMSG   	TxtMSG("FDDI_SNAP", 2)

#define	FDDITSM_MACFDI_TXTMSG		TxtMSG("MACFDI", 24)

#define	FDDITSM_NODE_EQUAL_TXTMSG   	TxtMSG("NODE=%s", 3)

#define	FDDITSM_FRAME_EQUAL_TXTMSG  	TxtMSG("FRAME=%s", 4)

#define	FDDITSM_STATS_VERSION_ERROR_MSG	MSG("020: This version of the statistics table is not supported.\n", 5)

#define	FDDITSM_MEMORY_ALLOC_ERROR_MSG	MSG("073: Unable to allocate memory.\n\r", 6)


/* Media Specific Statistics strings */

#define	FDDITSM_STAT_CONFIG_STATE_MSG		MSG("Configuration State", 7)

#define	FDDITSM_STAT_UPSTREAM_NODE_MSG	        MSG("Upstream Node Address", 8)

#define	FDDITSM_STAT_DOWNSTREAM_NODE_MSG	MSG("Downstream Node Address", 9)

#define	FDDITSM_STAT_FRAME_ERROR_MSG		MSG("Frame Error Count", 10)

#define	FDDITSM_STAT_FRAME_LOST_MSG		MSG("Lost Frame Count", 11)

#define	FDDITSM_STAT_RING_MANG_STATE_MSG	MSG("Ring Management State", 12)

#define	FDDITSM_STAT_LCT_FAILURE_MSG		MSG("Link Confidence Test (LCT) Failure Count", 13)

#define	FDDITSM_STAT_LEM_REJECT_MSG		MSG("Link Error (Lem) Reject Count", 14)

#define	FDDITSM_STAT_LEM_COUNT_MSG		MSG("Link Error (Lem) Count", 15)

#define	FDDITSM_STAT_LCONNECT_STATE_MSG		MSG("Connection State", 16)

#define	FDDITSM_GRP_BIT_OVERRIDE_MSG		MSG("126: The group bit in the node address override was cleared.\n\r", 17)

#define	FDDITSM_LOCAL_BIT_OVERRIDE_MSG		MSG("127: The local bit in the node address override was set.\n\r", 18)

#define	FDDITSM_WHITESPACE_MSG			MSG(" \t\n", 19)

#define	FDDITSM_ODI_SPECVER_MSG			TxtMSG("ODI_CSPEC_VERSION: 1.11", 20)

#define FDDITSM_INVALID_NODE_ERROR_MSG	MSG("Node Number is invalid and was ignored.\n\r", 25)

 /****************************************************************************
 *
 *  The Message file version, copyright, and Language strings are in here for 
 *  the requirement that an external utilility can display this information 
 *  about the .MSG file. In the Language string, the first instance of the
 *  Language is the native name of the language (i.e. Duetche) while the
 *  name in parenthesis is the English name of the Language (i.e. German).
 *
 ****************************************************************************/

#define MESSAGE_FILE_VERSION MSG("VeRsIoN=1.05  Novell FDDI Topology Specific Module message file.", 21)

#define MESSAGE_FILE_COPYRIGHT MSG("CoPyRiGhT=(c) Copyright 1995, 1996, 1997, 1998, by Novell, Inc. All rights reserved.", 22)

#define MESSAGE_FILE_LANGUAGE MSG("LaNgUaGe= English (English)",23)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.29