cne3200.txt Driver File Contents (novell-lancomp-devel-2004.10.05-1windows.zip)

/*--------------------------------------------------------------------------*
*  Copyright Unpublished Work of Novell, Inc. All Rights Reserved
*
*  THIS WORK IS AN UNPUBLISHED WORK AND CONTAINS CONFIDENTIAL,
*  PROPRIETARY AND TRADE SECRET INFORMATION OF NOVELL, INC.
*  ACCESS TO THIS WORK IS RESTRICTED TO (I) NOVELL EMPLOYEES
*  WHO HAVE A NEED TO KNOW TO PERFORM TASKS WITHIN THE SCOPE
*  OF THEIR ASSIGNMENTS AND (ii) ENTITIES OTHER THAN NOVELL
*  WHO HAVE ENTERED INTO APPROPRIATE LICENSE AGREEMENTS.
*  NO PART OF THIS WORK MAY BE USED, PRACTICED, PERFORMED, COPIED,
*  DISTRIBUTED, REVISED, MODIFIED, TRANSLATED, ABRIDGED,
*  CONDENSED, EXPANDED, COLLECTED, COMPILED, LINKED, RECAST,
*  TRANSFORMED OR ADAPTED WITHOUT THE PRIOR WRITTEN CONSENT OF
*  NOVELL.  ANY USE OR EXPLOITATION OF THIS WORK WITHOUT AUTHORIZATION
*  COULD SUBJECT THE PERPETRATOR TO CRIMINAL AND CIVIL LIABILITY.
*--------------------------------------------------------------------------*/
/*****************************************************************************
*
* Title:		CNE3200 HSM Message Text Module.
*
* Filename:		cne3200.txt
*
* ODI Spec Ver:	1.11
*
* Description:	Message File for the CNE3200.LAN file.
*
* Modification History:
*
* 01-07-98 WTT	Added 1998 to copyright string and changed version to 1.04.
*
* 02-11-99 SMN	Added 1999 to copyright string and changed version to 1.05.
****************************************************************************/

#define CNE3200_SHORTNAME_TXTMSG   TxtMSG("CNE3200", 1)

#define CNE3200_CONFIGSIG_TXTMSG   TxtMSG("HardwareDriverMLID        ", 2)

#define CNE3200_POLLOPTION_TXTMSG  TxtMSG("POLL=%d", 3)
						
#define CNE3200_SPECVER_TXTMSG TxtMSG("HSM_CSPEC_VERSION: 1.11", 4)


#define CNE3200_TXRETRYFAIL_STR      MSG("Transmit Retry Count", 5)

#define CNE3200_CLEARSENDTABLE_STR   MSG("Tx Clear To Sends Errors", 6)

#define CNE3200_UNDERRUN_STR         MSG("Tx DMA Underrun Errors", 7)

#define CNE3200_RXDMAOVERRUN_STR     MSG("Rx DMA Overrun Errors", 8)

#define CNE3200_PACKETSLIDE_STR      MSG("Rx Packet Slide Errors", 9)

#define CNE3200_DUMMYRCB_STR         MSG("Rx Dummy RCB Used Errors", 10)

#define CNE3200_ADAPTERRESET_STR     MSG("Internal Adapter Reset", 11)

#define CNE3200_BADFRAGLEN_STR       MSG("Mondo Fragment Length Errors", 12)

#define CNE3200_POLLTIMEOUT_STR      MSG("Polling Timeout", 13)

#define CNE3200_ADAPTERDIED_STR      MSG("Reset Because Hardware Died Errors", 14)

#define CNE3200_NUMINTSFIRED_STR     MSG("Number Of Interrupts Fired", 15)

#define CNE3200_NOBOARD_MSG          MSG("The board cannot be found.", 16)

#define CNE3200_MEMERR_MSG           MSG("The board's memory failed the memory test.", 17)

#define CNE3200_CHECKSUMERR_MSG      MSG("The board's ROM has checksum errors.\n\r", 18)

#define CNE3200_NOIRQERR_MSG         MSG("No interrupt was selected.  The board must be reconfigured.\n\r", 19)

#define CNE3200_POLLIRQBACKUP_MSG    MSG("Polling With Interrupt Backup and %dns Poll Timeout Mode.\n\r", 20)

#define CNE3200_IRQMODEONLY_MSG      MSG("Interrupt Only Mode.\n\r", 21)

#define CNE3200_FIRMWAREINITERR_MSG  MSG("The firmware cannot be initialized.\n\r", 22)

#define CNE3200_FIRMWARESTARTERR_MSG MSG("The firmware cannot be started.\n\r", 23)

#define CNE3200_BOARDFAIL_MSG        MSG("The board has failed.\n\r", 24)

 /****************************************************************************
 *
 *  The Message file version, copyright, and Language strings are in here for 
 *  the requirement that an external utilility can display this information 
 *  about the .MSG file. In the Language string, the first instance of the
 *  Language is the native name of the language (i.e. Duetche) while the
 *  name in parenthesis is the English name of the Language (i.e. German).
 *
 ****************************************************************************/

#define MESSAGE_FILE_VERSION MSG("VeRsIoN=1.05  Novell Ethernet NE3200 message file.", 25)

#define MESSAGE_FILE_COPYRIGHT MSG("CoPyRiGhT=(c) Copyright 1996, 1997, 1998, 1999 by Novell, Inc. All rights reserved.", 26)

#define MESSAGE_FILE_LANGUAGE MSG("LaNgUaGe= English (English)",27)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 2.34