; NE2000.INF
;
; Novell NE2000 Network Interface Cards.
;
; VeRsIoN=1.07 Novell Windows 95 INF file: Novell Ethernet NE2000.
; CoPyRiGhT=(c) Copyright 1996, 1997, 1998, by Novell, Inc. All rights reserved.
[version]
InfVersion=00.01.07
signature="$CHICAGO$"
Class=Net
provider=%V_N%
Layoutfile=nllayout.inf
;****************************************************************************
; Manufacturer Section
;****************************************************************************
[Manufacturer]
%V_Novell%=Novell
%V_Novell2%=Novell2
%V_Artisoft%=Artisoft
%V_IBM%=IBM
%V_NATIONAL%=NATIONAL
;****************************************************************************
; Manufacturer Name Section
;****************************************************************************
[Novell]
%*pnp80d4.DeviceDesc%=*pnp80d4.Ndi, *pnp80d4 ; Novell NE2000
;%*pnp80d6.DeviceDesc%=*pnp80d6.Ndi, *pnp80d6 ; NE2000 Compatible (same String)
%*pnp80d9.DeviceDesc%=*pnp80d9.Ndi, *pnp80d9 ; Novell NE2000 Plus
%*pnp80d9.DeviceDesc3%=*pnp80d9pio.Ndi, *pnp80d9 ; NE2000 Plus PIO mode
%NE4100.DeviceDesc%=NE4100.Ndi, PCMCIA\NOVELL-Ethernet-0002
[Novell2]
%*pnp80d4.DeviceDesc2%=*pnp80d4.Ndi, *pnp80d4 ; Novell/Anthem NE2000
%*pnp80d6.DeviceDesc%=*pnp80d6.Ndi, *pnp80d6 ; NE2000 Compatible (same String)
%*pnp80d9.DeviceDesc2%=*pnp80d9.Ndi, *pnp80d9 ; NE2000 Plus
%*pnp80d9.DeviceDesc3%=*pnp80d9pio.Ndi, *pnp80d9 ; NE2000 Plus PIO mode
[Artisoft]
%*pnp8138.DeviceDesc%=*pnp8138.Ndi, *pnp8138 ; Artisoft AE-2 or AE-3
[IBM]
%*IBM2.DeviceDesc%=*SNIP2.Ndi, PCMCIA\IBM_Corp.-Ethernet-6446
[NATIONAL]
%NNE4100.DeviceDesc%=NNE4100.Ndi, PCMCIA\NATIONAL-Ethernet-0002
;****************************************************************************
; INF INSTALL SECTION
;****************************************************************************
;****************************************************************************
; *PNP80D4 Novell NE2000 (C, DOS ODI)
;****************************************************************************
[*pnp80d4.Ndi]
AddReg=*pnp80d4.Ndi.reg, NE2000.Ndi.reg, ISA.params.reg, NE2000.params.reg, ODI.Common.CFG.reg
LogConfig=*pnp80d4.LogConfig
;****************************************************************************
; *PNP80D6 Novell compatible NE2000
;****************************************************************************
[*pnp80d6.Ndi]
AddReg=*pnp80D6.Ndi.reg, NE2000.Ndi.reg, ISA.params.reg, NE2000.params.reg, ODI.Common.CFG.reg
LogConfig=*pnp80d6.LogConfig
;****************************************************************************
; *PNP80D9 Novell NE2000 Plus (C, DOS ODI)
;****************************************************************************
[*pnp80d9.Ndi]
AddReg=*pnp80d9.Ndi.reg, ISA.params.reg, NE2000.Ndi.reg, NE2000.params.reg, ODI.Common.CFG.reg
LogConfig=*pnp80d9.LogConfig
;****************************************************************************
; *PNP80D9 Novell NE2000 Plus Programmed IO (C, DOS ODI)
;****************************************************************************
[*pnp80d9pio.Ndi]
AddReg=*pnp80d9.Ndi.reg, NE2000.Ndi.reg, ISA.params.reg, NE2000.params.reg, ODI.Common.CFG.reg
LogConfig=*pnp80d9pio.LogConfig
;****************************************************************************
; *PNP8138 Artisoft AE-2 or AE-3
;****************************************************************************
[*pnp8138.Ndi]
AddReg=*pnp8138.Ndi.reg, NE2000.Ndi.reg, ISA.params.reg, NE2000.params.reg, ODI.Common.CFG.reg
LogConfig=*pnp8138.LogConfig
;****************************************************************************
; *PNP815f National Semiconductor Ethernode *16AT
;****************************************************************************
[*SNIP2.Ndi]
AddReg=*SNIP2.Ndi.reg, NE2000.Ndi.reg, SLOT.reg, pcNE2000.params.reg, ODI.Common.CFG.reg
;****************************************************************************
; PCMCIA.00A4.0002 NOVELL NE4100 ETHERNET (PCMCIA)
;****************************************************************************
[NE4100.Ndi]
AddReg=NE4100.Ndi.reg, NE2000.Ndi.reg, SLOT.reg, pcNE2000.params.reg, ODI.Common.CFG.reg
;****************************************************************************
; pcmcia.00A4.0002 National Semiconductor INFO MOVER
;****************************************************************************
[NNE4100.Ndi]
AddReg=NNE4100.Ndi.reg, NE2000.Ndi.reg, SLOT.reg, pcNE2000.params.reg, ODI.Common.CFG.reg
;****************************************************************************
; .REG (Device IDs)
;****************************************************************************
[*pnp80d4.Ndi.reg]
HKR,Ndi,DeviceID,,"*pnp80d4"
[*pnp80d9.Ndi.reg]
HKR,Ndi,DeviceID,,"*pnp80d9"
[*pnp80D6.Ndi.reg]
HKR,Ndi,DeviceID,,"*pnp80D6"
[*pnp8138.Ndi.reg]
HKR,Ndi,DeviceID,,"*pnp8138"
[*SNIP2.Ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\IBM_Corp.-Ethernet-6446"
HKR,Ndi,CardType,,"PCMCIA"
[NE4100.Ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\NE4100-Ethernet"
HKR,Ndi,CardType,,"PCMCIA"
[NNE4100.Ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\National-NE4100-Ethernet-Infomover"
HKR,Ndi,CardType,,"PCMCIA"
;****************************************************************************
; .REG Common Settings for all NE2000 drivers
;****************************************************************************
[NE2000.Ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*odiload
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
; Ndi section
HKR,Ndi,NdiInstaller,,"odipage.dll,odiNdiproc"
; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"odinsup,NovellODI32"
HKR,Ndi\Interfaces,UpperRange,,"odinsup,NovellODI32"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"
; Install section
HKR,Ndi\Install,"32 Bit",,"NE2000.ODI32.Install"
; ODI 32 Bit Info
HKR,"ODI\32 Bit",ModulePath,,"%24%%DRIVER_32_PATH%"
HKR,"ODI\32 Bit",Modules,,"LSLC32.NLM,CMSM.NLM,ETHERTSM.NLM"
HKR,"ODI\32 Bit",DriverPath,,"%24%%DRIVER_32_PATH%"
HKR,"ODI\32 Bit",FileName,,"CNE2000.lan"
;****************************************************************************
; .LogConfig Sections
;****************************************************************************
; NE2000
[*pnp80d4.LogConfig]
IRQConfig=2,3,4,5
IOConfig=20@300-37F%FFE0(3FF::)
ConfigPriority=HARDRECONFIG
; NE2000 Compatible
[*pnp80D6.LogConfig]
IRQConfig=2,3,4,5,10,11,12,15
IOConfig=20@240-2DF%FFC0(3FF::),20@300-37F%FFE0(3FF::)
ConfigPriority=HARDRECONFIG
; NE2000 PLUS
[*pnp80d9.LogConfig]
IRQConfig=2,3,4,5,10,11,12,15
IOConfig=20@240-2DF%FFC0(3FF::),20@300-37F%FFE0(3FF::)
MemConfig=4000@C8000-FFFFF%FFFFC000
ConfigPriority=HARDRECONFIG
; NE2000 PLUS Programmed IO
[*pnp80d9pio.LogConfig]
IRQConfig=2,3,4,5,10,11,12,15
IOConfig=20@240-2DF%FFC0(3FF::),20@300-37F%FFE0(3FF::)
ConfigPriority=HARDRECONFIG
; Artisoft AE-2 or AE-3
[*pnp8138.LogConfig]
IRQConfig=2,3,4,5,10,15
IOConfig=20@300-37F%FFE0(3FF::)
ConfigPriority=HARDRECONFIG
;****************************************************************************
; Install Section
;****************************************************************************
[NE2000.ODI32.Install]
CopyFiles=NE2000.ODI32.CopyFiles, NE2000.ODI32MSG.CopyFiles
UpdateAutoBat=NE2000.ODI32.autobat
[NE2000.ODI32.autobat]
CmdDelete=LSL
CmdDelete=N16ODI
CmdDelete=NESL
CmdDelete=NE2000
CmdDelete=ODIHLP
;****************************************************************************
; Remove Section
;****************************************************************************
;****************************************************************************
;Common Params
;****************************************************************************
[NE2000.params.reg]
; Resources
HKR,,IRQ,1,04,00,00,00
HKR,Ndi\params\IRQ,resc,1,04,00,00,00
HKR,Ndi\params\IRQ,ParamDesc,,"IRQ Level"
HKR,Ndi\params\IRQ,flag,1,60,00,00,00
HKR,,Port,1,02,00,00,00
HKR,Ndi\params\Port,resc,1,02,00,00,00
HKR,Ndi\params\Port,ParamDesc,,"I/O Port Address"
HKR,Ndi\params\Port,flag,1,20,00,00,00
;****************************************************************************
; Additional settings for PCMCIA NE2000 Drivers
;****************************************************************************
[pcNE2000.params.reg]
; Resources
HKR,,IRQ,1,04,00,00,00
HKR,,Port,1,02,00,00,00
HKR,,AttributeBase,1,01,00,00,00
; OVERRIDE FOR 16K RAM WINDOW
HKR,Override,0000,1,\
;
00,04,00,00, \ ; CONFIGMG_VERSION
00,00,00,00, \ ; PRIORITY
;
; I/O Resource Descriptor
;
24,00,00,00, \ ; Total length of I/O Resource Descriptor
02,00,00,00, \ ; ResType_IO = 0x00000002
01,00, \ ; IOD_Count;
0C,00, \ ; IOD_Type; // IOType_Range = 0x000C
00,00, \ ; IOD_Alloc_Base;
00,00, \ ; IOD_Alloc_End;
00,00, \ ; IOD_DesFlags;
00, \ ; IOD_Alloc_Alias;
00, \ ; IOD_Alloc_Decode;
E0,FF, \ ; IOR_Align; // Mask for base alignment
20,00, \ ; IOR_nPorts; // Number of ports
00,00, \ ; IOR_Min; // Min port address
FF,FF, \ ; IOR_Max; // Max port address
00,00, \ ; IOR_RangeFlags; // Flags
00, \ ; IOR_Alias; // Alias offset
00, \ ; IOR_Decode; // Address specified
45,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor
;
14,00,00,00, \ ; Total length of IRQ Resource Descriptor
04,00,00,00, \ ; ResType_IRQ = 0x00000004
00,00, \ ; IRQD_Flags;
00,00, \ ; IRQD_Alloc_Num; // Allocated IRQ number
FF,FF, \ ; IRQD_Req_Mask; // Mask of possible IRQs
00,00, \ ; IRQD_Reserved;
70,00,00,00, \ ; PCCARD flags, 0x20 = Level mode interrupts
;
; Memory Resource Descriptor 0
;
34,00,00,00, \ ; Total length of Memory Resource Descriptor
01,00,00,00, \ ; ResType_Mem = 0x00000001
01,00, \ ; MD_Count;
14,00, \ ; MD_Type; // MType_Range = 0x0014
00,00,00,00, \ ; MD_Alloc_Base;
00,00,00,00, \ ; MD_Alloc_End;
00,00, \ ; MD_Flags;
00,00, \ ; MD_Reserved;
00,F0,FF,FF, \ ; MR_Align; // Mask for base alignment
00,10,00,00, \ ; MR_nBytes; // Count of bytes (4K)
00,00,00,00, \ ; MR_Min; // Min Address
FF,FF,FF,FF, \ ; MR_Max; // Max Address
00,00, \ ; MR_Flags; // Flags
00,00, \ ; MR_Reserved;
02,00,00,00, \ ; PCCARD flags, 0x02 = attribute mem, or
; 0x08 = 16-bit common mem
00,00,00,00, \ ; Memory card address
;
; Memory Resource Descriptor 1
;
34,00,00,00, \ ; Total length of Memory Resource Descriptor
01,00,00,00, \ ; ResType_Mem = 0x00000001
01,00, \ ; MD_Count;
14,00, \ ; MD_Type; // MType_Range = 0x0014
00,00,00,00, \ ; MD_Alloc_Base;
00,00,00,00, \ ; MD_Alloc_End;
00,00, \ ; MD_Flags;
00,00, \ ; MD_Reserved;
00,C0,FF,FF, \ ; MR_Align; // Mask for base alignment
00,40,00,00, \ ; MR_nBytes; // Count of bytes (4K)
00,00,00,00, \ ; MR_Min; // Min Address
FF,FF,FF,FF, \ ; MR_Max; // Max Address
00,00, \ ; MR_Flags; // Flags
00,00, \ ; MR_Reserved;
08,00,00,00, \ ; PCCARD flags, 0x02 = attribute mem, or
; 0x08 = 16-bit common mem
00,10,01,00, \ ; Memory card address
;
; REQUEST_CONFIG_PKT Descriptor
;
19,00,00,00, \ ; Total length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \ ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C
00,00, \ ; Socket;
02,00, \ ; Attributes;
32, \ ; Vcc;
32, \ ; Vpp1;
32, \ ; Vpp2;
02, \ ; IntType;
00,00,02,00, \ ; ConfigBase;
00, \ ; Status;
00, \ ; Pin;
00, \ ; Copy;
01, \ ; ConfigIndex;
0B, \ ; Present;
;
00,00,00,00 ; TERMINATOR
;***********************************************************************
;****************************************************************************
; general Ethernet Frame-Type params
;****************************************************************************
[ODI.Common.CFG.reg]
; First Logical Board
HKR,Ndi\params\Frame1,ParamDesc,,"1. Frame Type"
HKR,Ndi\params\Frame1,default,,1
HKR,Ndi\params\Frame1,type,,enum
HKR,Ndi\params\Frame1,optional,,0
HKR,Ndi\params\Frame1\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame1\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame1\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame1\enum,4,,"Ethernet_802.3"
; Second Logical Board
HKR,Ndi\params\Frame2,ParamDesc,,"2. Frame Type"
HKR,Ndi\params\Frame2,default,,2
HKR,Ndi\params\Frame2,type,,enum
HKR,Ndi\params\Frame2,optional,,0
HKR,Ndi\params\Frame2\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame2\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame2\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame2\enum,4,,"Ethernet_802.3"
HKR,Ndi\params\Frame2\enum,5,,"Not used"
; Third Logical Board
HKR,Ndi\params\Frame3,ParamDesc,,"3. Frame Type"
HKR,Ndi\params\Frame3,default,,3
HKR,Ndi\params\Frame3,type,,enum
HKR,Ndi\params\Frame3,optional,,0
HKR,Ndi\params\Frame3\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame3\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame3\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame3\enum,4,,"Ethernet_802.3"
HKR,Ndi\params\Frame3\enum,5,,"Not used"
; Fourth Logical Board
HKR,Ndi\params\Frame4,ParamDesc,,"4. Frame Type"
HKR,Ndi\params\Frame4,default,,4
HKR,Ndi\params\Frame4,type,,enum
HKR,Ndi\params\Frame4,optional,,0
HKR,Ndi\params\Frame4\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame4\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame4\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame4\enum,4,,"Ethernet_802.3"
HKR,Ndi\params\Frame4\enum,5,,"Not used"
; Node Address Override
HKR,Ndi\params\"Node Address",ParamDesc,,"Node Address Override"
HKR,Ndi\params\"Node Address",type,,edit
HKR,Ndi\params\"Node Address",LimitText,,18
HKR,Ndi\params\"Node Address",UpperCase,,1
HKR,Ndi\params\"Node Address",default,,""
HKR,Ndi\params\"Node Address",flag,1,20,00,00,00
HKR,Ndi\params\"Node Address",optional,,1
; Bus Name
;HKR,Ndi\params\"BUS",ParamDesc,,"Bus Name"
;HKR,Ndi\params\"BUS",type,,edit
;HKR,Ndi\params\"BUS",LimitText,,32
;HKR,Ndi\params\"BUS",UpperCase,,1
;HKR,Ndi\params\"BUS",default,,""
;HKR,Ndi\params\"BUS",optional,,1
; Help section
HKR,Ndi,HelpText,,%ODIMLID_HELP%
[ISA.params.reg]
; Adapter ISA FOR isa BUS CARD
HKR,Ndi\params\ISA,ParamDesc,,"ISA"
HKR,Ndi\params\ISA,type,,keyonly
HKR,Ndi\params\ISA,optional,,0
[SLOT.reg]
; Adapter Slot Number
HKR,Ndi\params\Slot,ParamDesc,,"Adapter Slot Number"
HKR,Ndi\params\Slot,type,,int
HKR,Ndi\params\Slot,default,,1
HKR,Ndi\params\Slot,min,,1
HKR,Ndi\params\Slot,max,,65535
HKR,Ndi\params\Slot,step,,1
HKR,Ndi\params\Slot,optional,,1
HKR,Ndi\params\Slot,HIN,,""
;****************************************************************************
; File to be copied
;****************************************************************************
[NE2000.ODI32.CopyFiles]
CNE2000.LAN,,,5
[NE2000.ODI32MSG.CopyFiles]
CNE2000.MSG,,,5
;****************************************************************************
; Source Disk Names & Source Disk Files
;****************************************************************************
;****************************************************************************
; Destination Directories
;****************************************************************************
[DestinatioNdirs]
DefaultDestDir =11 ; LDID_SYS
NE2000.ODI32.CopyFiles =24,novell\client32
NE2000.ODI32MSG.CopyFiles =24,novell\client32\nls\francais
;****************************************************************************
; Localizable Strings
;****************************************************************************
[strings]
; Provider
V_N=" Novell"
; Manufacturers
V_Novell="Novell"
V_Novell2="Novell/Anthem"
V_IBM="IBM"
V_Artisoft="Artisoft Corporation"
V_NATIONAL="National Semiconductor"
;Paths to drivers
DRIVER_32_PATH="novell\client32\"
; Novell PNP Devices
*pnp80d4.DeviceDesc="Novell NE2000"
*pnp80d6.DeviceDesc="Compatible avec NE2000"
*pnp80d9.DeviceDesc="Novell NE2000 Plus"
NE4100.DeviceDesc="Novell NE4100 PCMCIA Ethernet"
; Novell/Anthem
*pnp80d4.DeviceDesc2="Novell/Anthem NE2000"
*pnp80d9.DeviceDesc2="NE2000 Plus"
*pnp80d9.DeviceDesc3="NE2000 Plus Programmed I/O mode"
; IBM
*IBM2.DeviceDesc="Adaptateur de carte de crédit Ethernet II IBM"
; pnp National Semiconductor
NNE4100.DeviceDesc="National NE4100 Infomover ou compatible"
; Artisoft PNP Devices
*pnp8138.DeviceDesc="Artisoft AE-2 ou AE-3"
; Context help
ODIMLID_HELP="Le pilote ODI de Novell vous permet d'utiliser les composants de réseautique 32 bits."
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.