1. RX50u2.zip Driver
2. mcusbms.inf File Contents

mcusbms.inf Driver File Contents (RX50u2.zip)

[Version]
Signature="$CHICAGO$"
Class=USB
provider=%MCS%

[Manufacturer]
%MfgName%=MacPower


[MacPower]
%USB\VID_04CF&PID_8810.DeviceDesc%=CS881X.install,USB\VID_04CF&PID_8810
%USB\VID_04CF&PID_8811.DeviceDesc%=CS881X.install,USB\VID_04CF&PID_8811
%USB\VID_04CF&PID_8813.DeviceDesc%=CS881X.install,USB\VID_04CF&PID_8813
%USB\VID_04CF&PID_0800.DeviceDesc%=MTP800.install,USB\VID_04CF&PID_0800

%USB\VID_0DC4&PID_0071.DeviceDesc%=MTP800.install,USB\VID_0DC4&PID_0071
%USB\VID_0DC4&PID_00C2.DeviceDesc%=MTP800.install,USB\VID_0DC4&PID_00C2
%USB\VID_0DC4&PID_00C3.DeviceDesc%=MTP800.install,USB\VID_0DC4&PID_00C3
%USB\VID_0DC4&PID_00C4.DeviceDesc%=MTP800.install,USB\VID_0DC4&PID_00C4

%USB\VID_0DC4&PID_0082.DeviceDesc%=MTP800.install,USB\VID_0DC4&PID_0082

%MCUSBMS\DISK.DeviceDesc%=pdr.install,MCUSBMS\DISK

[PreCopySection]
HKR,,NoSetupUI,,1

[DestinationDirs]
DefaultDestDir=11
wdm.files = 10,System32\Drivers       ; \<WINDIR>\SYSTEM32\DRIVERS
pdr.files = 12                        ; \<WINDIR>\SYSTEM\IOSUBSYS

[CS881X.install]
CopyFiles=wdm.files, pdr.files, usbsafe.files
AddReg=wdm.addreg, usbsafe.addreg

[MTP800.install]
CopyFiles=wdm.files, pdr.files, usbsafe.files
AddReg=wdm.addreg

[MTP800.install.HW]
AddReg=cbi.addreg.HW

[wdm.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,MCUSBMS.SYS

[usbsafe.addreg]
HKLM, "Software\Microsoft\Windows\CurrentVersion\RunOnce","MC USB Safe",,"%11%\USBSafe.exe"
HKLM, "Software\Microsoft\Windows\CurrentVersion\Run","MC USB Safe",,"%11%\USBSafe.exe"

; Indicate that the device uses the C/B/I protocol
[cbi.addreg.HW]
HKR,,DeviceProtocol,0x10001,00

; Indicate that the device uses the C/B protocol
[cb.addreg.HW]
HKR,,DeviceProtocol,0x10001,01

; Indicate that the device uses the BULK ONLY protocol
[bulkonly.addreg.HW]
HKR,,DeviceProtocol,0x10001,50

; Install the port driver
[pdr.install]
AddReg=pdr.addreg

[pdr.addreg]
HKR,,DevLoader,,*ios
HKR,,PortDriver,,MCUSBMSP.PDR

[wdm.files]
MCUSBMS.SYS

[pdr.files]
MCUSBMSP.PDR

[usbsafe.files]
USBSAFE.EXE

[SourceDisksNames]
1000 = "Myson-Century USB Mass Storage Driver Disk","",,

[SourceDisksFiles]
MCUSBMS.SYS = 1000
MCUSBMSP.PDR = 1000
USBSAFE.EXE = 1000
;---------------------------------------------------------------;

[Strings]
MCS="Myson-Century"
MfgName="Myson-Century"
USB\VID_04CF&PID_8810.DeviceDesc="Myson-Century CS8810 USB Mass Storage Device"
USB\VID_04CF&PID_8811.DeviceDesc="Myson-Century CS8811 USB Mass Storage Device"
USB\VID_04CF&PID_8813.DeviceDesc="Myson-Century CS8813 USB Mass Storage Device"
USB\VID_04CF&PID_0800.DeviceDesc="Myson-Century MTP800 USB Mass Storage Device"

USB\VID_0DC4&PID_0071.DeviceDesc="MacPower USB2.0_M Storage Enclosure"
USB\VID_0DC4&PID_00C2.DeviceDesc="MacPower USB2.0_M 2.5HDD"
USB\VID_0DC4&PID_00C3.DeviceDesc="MacPower USB2.0_M 3.5HDD"
USB\VID_0DC4&PID_00C4.DeviceDesc="MacPower USB2.0_M 2.5HDD"
USB\VID_0DC4&PID_0084.DeviceDesc="MacPower USB2.0_M Storage Enclosure"

MCUSBMS\DISK.DeviceDesc="USB Mass Storage Device"