EDW-042/EDW-042C:
D360. to D361. Change History
1. Fixed fujitsu test program DVD-R/RW failed problem.
2. Fixed read command did not set speed after standby.
3. Enable Deep standby function in stabdby mode.
4. Fixed TAO_OVER_BURN bug of using formated disc.
5. Add Boot Code for flash update fail recovery.
6. Fixed writable DVD seek fail may hang bug.
7. Fixed vendor check sum command bug.
8. DVD-RW 4X write support.
D361. to D363. Change History.
1. Fixed immed start stop eject command hanged when tray is out.
2. Fixed bug for HCT test.
3. Fixed wrong Q-code TNO in audio play.
4. Fixed bug for DVD+RW 4X disc will set DVD speed down flag.
5. Fixed DVD+RW in Nero DAO write small data failed issue.
6. Fixed Roxio Disc Copy in DVD-RW failed issue.
7. Fixed Nero DVD-R write hang issue (USB bridge board with CF card reader).
8. Support DVD+R/RW DVD-R/RW 8cm disc write.
9. DVD+R9 will not write 4 ECC in middle area issue.
10. Support DVD+R fake as blank disc.
11. For DVD-R/RW DAO auto close process, first sync cache command will reply error bug.
12. Support DVD+RW new format to solve NTI multi-session write failed issue.
Modify DVD+R 4X write strategy.
4x DVD+R YU DEN 000 T02
EDW-041 from DX05 to DX31 change history.
1. Fix the problem of eject will cause SRST in Win XP.
2. Fix unbalance disc detect error problem.
3. Fix Nero CD speed create test disc and verify fail problem.
4. Fix DLA format failed problem.
5. Enhance read performance of CD/DVD.
6. Fix CD-R TAO write fail issue
7. Fix EZCD DVD+RW format fail issue
Add CD-RW
1. MCC 973424 744300 24X
2. InfoDisc 972531 795973 10X
DBW-521/HBW-521
G306 Change note:
Fix disc copies >1 pcs fail issue.
G302 change history:
1. Support UDMA mode 4
2. Support Overburn
3. Enhance 8 cm disc readability.
DDW-081(2)/HDW-081(2): B360 to B364. change history
Engine changes:
1.Add support 4X DVD-R write
2.Fix bug for DVD-RW full format.
3Improve DVD-R seek capability.
4.Fix DVD-RW can not format in Roxio.
5.Fix 8X burn fail on lead-out
6.ImproveCDRW write quality
MCC 973422 744300 LS CD-RW
MCC 973422 795974 LS CD-RW
RITEK 972710 744100 LS CD-RW
MBI 971700 795974 LS CD-RW
RICOH 972700 741200 LS CD-RW
RITEK 971000 795974 LS CD-RW
CMC 972665 750000 LS CD-RW
Princo 972721 795974 LS CD-RW
PRODISC 973211 795974 LS CD-RW
InfoDisc 972530 795974 LS CD-RW
Daxon 972260 744150 LS CD-RW
FORNEX 972701 795974 LS CD-RW
FORNEX 972600 795974 LS CD-RW
Lead Data 972650 795974 LS CD-RW
Nan Ya 971535 795974 LS CD-RW
Giga Storage 972815 795974 LS CD-RW
7.add support DVD-R list
CMC CMCMAG. 2X DVD-R
CMC CMCMAG.AF1 4X DVD-R
Gigistorage GSC002 4X DVD-R
Maxell MXLRG01 2X DVD-R
Maxell MXLRG02 4X DVD-R
Mitsubishi MCC01RG20 4X DVD-R
Optodisc OPTODISCR004 4X DVD-R
Princo PRINCO 4X DVD-R
Ritek RITEKG03 2X DVD-R
Ritek RITEKG04 4X DVD-R
TaiyoYuden TYG01 4X DVD-R
TDK TDKG02000000 2X DVD-R
TDK TTG01 4X DVD-R
8.add support DVD-RW list
CMC CMCW02 2X DVD-RW
JVC/Victor JVC_VictorW7 2X DVD-RW
Mitsubishi MCC01RW11n9 2X DVD-RW
Ritek RITEKW01 2X DVD-RW
TDK TDK503sakuM3 2X DVD-RW
9.add support DVD+R
Info source ISSM 001 8X DVD+R
Sony Sony D11 8X DVD+R
Nanya NANYA CLX 8X DVD+R
DAXON DAXON AZ2 8X DVD+R
DAXON PHILIPS C08 8X DVD+R
BEALL BeAll000P80 8X DVD+R
EDD DT00202 4X DVD+R
MPO MOPMEDIA040 4X DVD+R
10.add support DVD+RW
SENTINEL SENTINELW01 2.4X DVD+RW
SENTINEL SENTINELW02 4X DVD+RW
DDW-081/HDW-081: B375 to B377. change history
Engine changes:
1.Modify S/H for CD-R recording at 18_32x.
2. Modify write strategy:
DVD+R 8X:
MAXELL 002
WFKA11.211
AML002
TDK002
VIVA002
ULTRAN 2023
INFORDISC R20
WINGSHING001
DVD+R 4X:
NANYA RJB
LONGTEN 002
DAXON AZ101
WFKA11..111.8
AML001
POSR01
VANGUARD001
EMDP 000
GSC503 H01
DKP000
001
DVD-R 4X:
PRINCO
DVD+R 2.4X:
PRINCO
DDW-081/HDW-081: B362 to B375. change history
Engine changes:
1. Add MCC 1X DVD-RW disc support
2. Add TDK 2X DVD-RW disc support
DDW-081/HDW-081: B360 to B362. change history
Engine changes:
1 Fix DVD-RW blank fail issue.
2. Support MCC 2x DVD-RW
3. Add DVD-R 2x W.S.
1. MCC 01RG20
2. GSC 002
3. RITEK G04
4. TY G01
5. CMC mag af1
Data path changes:
1 DVD-RW write function ready.
2 Fix Run-in empty disc start up problem.
3 Fix poor DVD structure read problem.
4 Fix NERO wrong speed reported problem.
5 Fix DVD-RW multi-session issue , can add session with NERO
6 Solve quick format fail when disc is not empty during write first border zone.
Engine changes:
1 Fix DVD-RW blank fail issue.
DDW-081/HDW-081: BX30 to BX31. Change History
1. Fix can't run MP2/GTAVC on Defective drive DDW-081"
2. Fix Disc flash hangs issue
3. Fix Nero wrong speed reported problem
4. Fix flashing F/W hang when drive setting is Slave.
5. Solve worse disc read hang issue.
DDW-081/HDW-081: BX06 to BX30. Change History
1. CD-USRW 24x write supports.
2 Solve WinFlash sometimes hang PC issue.
3 Solve Cue Sheet SAO with CD-Text hang issue.
4 Fix Nero Info Tool display wrong write speed issue.
5 add 8X write
8x DVD+R YUDEN T02
8x DVD+R RITEK R03
8x DVD+R PRODISK R03
8X Philips 081
8X CMC MAG E01
4x DVD+R -> 8x YUDEN T01 V00
4x DVD+R -> 8x YUDEN T01 V01
4x DVD+R -> 8x PRODISK R02
4x DVD+R -> 8x RITEK R02
4x DVD+R -> 8x CMC MAG F01 V01
4x DVD+R -> 8x CMC MAG F01 V00
6 revise CDR Write Strategy
972666 795971 cmc
972666 795973 cmc
972529 795974 Hitachi
973219 795974 Prodisc
971517 795970 Ritek
973107 744501 Ritek
972416 795974 Sony
971517 795973 Ritek
971706 795974 MBI
7 Add: CDR Write Strategy ( support 40X)
972666 795974 CMC
972666 751000 CMC
972535 795974 Info disc
972656 795974 Lead data
972728 795974 Princo
973219 795971 Prodisc
973219 795972 Prodisc
973219 743001 Prodisc
973219 795972 Prodisc
972415 795974 Sony
971512 795973 Ritek
973101 744500 Ritek
973107 744502 Ritek
964337 795974 Ritek
972766 795971 Ricoh
972815 795974 Gigastorage 32X
8 Add CDRW Write strategy
972530 795974 INFODISC
973211 795974 PRODISC
9 Add US CDRW Write strategy
973424 744300 Mitsubishi
972712 744100 PRODISC
973212 795973 PRODISC
972665 750000 CMC
972531 795973 infodisc
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.