1. OPS662V110.ZIP Driver
2. README.TXT File Contents

README.TXT Driver File Contents (OPS662V110.ZIP)

Graphtec Cutting Plotter Driver OPS662 Ver.1.10
for Microsoft Windows 95 / 98 / Me / Windows NT 4.0 / Windows 2000 / Windows XP

Thank you for choosing the Graphtec OPS662 Cutting Plotter Driver. 

The README.TXT file in each directory contains instructions on installation and
operation as well as other notes. Be sure to read them carefully before 
installing or using this driver.

Before you begin installation, check that the program disk contains the 
following:
  WIN9X_ME\GPCUT.DRV     For Windows 95/98/Me
  WIN9X_ME\GPCUT.HLP
  WIN9X_ME\GTCUPMON.DLL
  WIN9X_ME\GPCUTMON.DLL
  WIN9X_ME\GTCUSBP.SYS
  WIN9X_ME\GPCUT.INF
  WIN9X_ME\USBPRINT.INF
  WIN9X_ME\README.TXT

  WINNT40\DISK1             For Windows NT4.0
  WINNT40\GPCUT.DLL
  WINNT40\GPCUTUI.DLL
  WINNT40\GPCUTUI.HLP
  WINNT40\GPCUTMON.DLL
  WINNT40\GPCUT.INF
  WINNT40\PREFRESH.EXE
  WINNT40\README.TXT
  WINNT40\CE30MK2.GPD
  WINNT40\FC7000.GPD

  WIN2K_XP\DISK1             For Windows 2000 / Windows XP
  WIN2K_XP\GPCUT.DLL
  WIN2K_XP\GPCUTUI.DLL
  WIN2K_XP\GPCUTUI.HLP
  WIN2K_XP\GPCUTMON.DLL
  WIN2K_XP\GPCUT.INF
  WIN2K_XP\PREFRESH.EXE
  WIN2K_XP\README.TXT
  WIN2K_XP\CE30MK2.GPD
  WIN2K_XP\FC7000.GPD

Precautions to be observed when connecting the CE3000Mk2 or FC7000 via USB
  * Supported OS
      Windows 98/Me, Windows 2000 Professional, or Windows XP
  * The plotter does not operate under Windows 3.1/95 or Windows NT.
  * Operation with other than the included driver is not guaranteed.
  * Do not connect multiple plotters to a single computer.
  * Operation is not guaranteed if the plotter is connected to a USB hub or to 
    a USB extension board. 

END