; Netac CDMA MobileWave Setup File ; Copyright (c) 2003 Netac technology CO., LTD. ; Manufacturer: Netac technology CO., LTD. [Version] LayoutFile=layout.inf signature="$CHICAGO$" Class=MultiFunction Provider=%Netac% ;Class Install [ClassInstall] Addreg=MFReg [MFReg] HKR,,,,%MFClassName% [DestinationDirs] DefaultDestDir=11 ; Manufacturer Section [Manufacturer] %Netac%=NetacMfg ; Manufacturer Name Section [NetacMfg] %IB3000.DeviceDesc%=IB3000,PCMCIA\IBRIDGE-IB3000-62F7 ; Install Sections [IB3000] AddReg=Common.reg,Cnfg0,Cnfg1,Cnfg2,Cnfg3,Cnfg4 [IB3000.HW] AddReg=2P.RegHW ; OVERRIDE for COM1 ;------------------- ;COM1,IRQ [Cnfg0] HKR,Override,0000,1, \ ; ; ; CONFIGMG_VERSION ; 00,04,00,00, \ ; ; PRIORITY ; 00,00,00,00, \ ; ; I/O Resource Descriptor 0: COM1 port (0x03F8) ; 24,00,00,00, \ ;Total length of I/O Resource Descriptor 02,00,00,00, \ ;ResType_IO=0x00000002 01,00, \ ;IOD_Count 0C,00, \ ;IOD_Type // IOType_Range = 0x000C 00,00, \ ;IOD_Alloc_Base 00,00, \ ;IOD_Alloc_End 00,00, \ ;IOD_DesFlags 00, \ ;IOD_Alloc_Alias 00, \ ;IOD_Alloc_Decode F8,FF, \ ;IOR_Align // Mask for base alignment E0/F0 08,00, \ ;IOR_nPorts // Number of ports, pony=10 F8,03, \ ;IOR_Min // Min port address FF,03, \ ;IOR_Max // Max port address 00,00, \ ;IOR_RangeFlags // Flags 00, \ ;IOR_Alias // Alias offset 00, \ ;IOR_Decode // Address specified 00,00,00,00, \ ;PCCARD flags, 0x00 = 8-bit port ; ; IRQ Resource Descriptor ; 14,00,00,00, \ ;Total length of IRQ Resource Descriptor 04,00,00,00, \ ;ResType_IRQ = 0x00000004 00,00, \ ;IRQD_Flags 00,00, \ ;IRQD_Alloc_Num // Allocated IRQ number 10,00, \ ;IRQD_Req_Mask // Mask of possible IRQs ; any IRQs 00,00, \ ;IRQD_Reserved 20,00,00,00, \ ;PCCARD flags, 0x20 // Level mode interrupts ; ; REQUEST_CONFIG_PKT Descriptor ; 19,00,00,00, \ ;Length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ;(ResType_Ignored_Bit+PCCARD_DEVICE_ID) = 0x897C 00,00, \ ;Socket 02,00, \ ;Attributes 21, \ ;Vcc 21, \ ;Vpp1 21, \ ;Vpp2 02, \ ;IntType 00,80,00,00 \ ;ConfigBase 00, \ ;Status 00, \ ;Pin 00, \ ;Copy 07, \ ;Configuration Option Register 03, \ ;Present ; ; TERMINATOR ; 00,00,00,00 ; OVERRIDE for COM2 ;------------------- ;Com2, IRQ [Cnfg1] HKR,Override,0001,1, \ ; ; ; CONFIGMG_VERSION ; 00,04,00,00, \ ; ; PRIORITY ; 00,00,00,00, \ ; ; I/O Resource Descriptor 0 : COM2 port (0x02F8) ; 24,00,00,00, \ ;Total length of I/O Resource Descriptor 02,00,00,00, \ ;ResType_IO=0x00000002 01,00, \ ;IOD_Count 0C,00, \ ;IOD_Type 00,00, \ ;IOD_Alloc_Base 00,00, \ ;IOD_Alloc_End 00,00, \ ;IOD_DesFlags 00, \ ;IOD_Alloc_Alias 00, \ ;IOD_Alloc_Decode F8,FF, \ ;IOR_Align 08,00, \ ;IOR_nPorts F8,02, \ ;IOR_Min FF,02, \ ;IOR_Max 00,00, \ ;IOR_RangeFlags 00, \ ;IOR_Alias 00, \ ;IOR_Decode 00,00,00,00, \ ;PCCARD flags, 0x00 = 8-bit port ; ; IRQ Resource Descriptor ; 14,00,00,00, \ ;Total length of IRQ Resource Descriptor 04,00,00,00, \ ;ResType_IRQ = 0x00000004 00,00, \ ;IRQD_Flags 00,00, \ ;IRQD_Alloc_Num 08,00, \ ;IRQD_Req_Mask 00,00, \ ;IRQD_Reserved 20,00,00,00, \ ;PCCARD flags, 0x20 ; ; REQUEST_CONFIG_PKT Descriptor ; 19,00,00,00, \ ;Length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ;ResType_Ignored_Bit+PCCARD_DEVICE_ID = 0x897C 00,00, \ ;Socket 02,00, \ ;Attributes 21, \ ;Vcc 21, \ ;Vpp1 21, \ ;Vpp2 02, \ ;IntType 00,80,00,00 \ ;ConfigBase 00, \ ;Status 00, \ ;Pin 00, \ ;Copy 07, \ ;Configuration Option Register 03, \ ;Present ; ; TERMINATOR ; 00,00,00,00 ; OVERRIDE for COM3 ;------------------- ; Com3, IRQ [Cnfg2] HKR,Override,0002,1, \ ; ; ; CONFIGMG_VERSION ; 00,04,00,00, \ ; ; PRIORITY ; 00,00,00,00, \ ; ; I/O Resource Descriptor 1 : COM3 port (0x03E8) ; 24,00,00,00, \ ;Total length of I/O Resource Descriptor 02,00,00,00, \ ;ResType_IO=0x00000002 01,00, \ ;IOD_Count 0C,00, \ ;IOD_Type 00,00, \ ;IOD_Alloc_Base 00,00, \ ;IOD_Alloc_End 00,00, \ ;IOD_DesFlags 00, \ ;IOD_Alloc_Alias 00, \ ;IOD_Alloc_Decode F8,FF, \ ;IOR_Align 08,00, \ ;IOR_nPorts E8,03, \ ;IOR_Min EF,03, \ ;IOR_Max 00,00, \ ;IOR_RangeFlags 00, \ ;IOR_Alias 00, \ ;IOR_Decode 00,00,00,00, \ ;PCCARD flags, 0x00 = 8-bit port ; ; IRQ Resource Descriptor ; 14,00,00,00, \ ;Total length of IRQ Resource Descriptor 04,00,00,00, \ ;ResType_IRQ = 0x00000004 00,00, \ ;IRQD_Flags 00,00, \ ;IRQD_Alloc_Num 10,00, \ ;IRQD_Req_Mask 00,00, \ ;IRQD_Reserved 20,00,00,00, \ ;PCCARD flags, 0x20 = Level mode interrupts ; ; REQUEST_CONFIG_PKT Descriptor ; 19,00,00,00, \ ;Length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ;ResType_Ignored_Bit+PCCARD_DEVICE_ID = 0x897C 00,00, \ ;Socket 02,00, \ ;Attributes 21, \ ;Vcc 21, \ ;Vpp1 21, \ ;Vpp2 02, \ ;IntType 00,80,00,00 \ ;ConfigBase 00, \ ;Status 00, \ ;Pin 00, \ ;Copy 07, \ ;Configuration Option Register 03, \ ;Present ; ; TERMINATOR ; 00,00,00,00 ; OVERRIDE for COM4 ;------------------- ;Com4, IRQ [Cnfg3] HKR,Override,0003,1, \ ; ; ; CONFIGMG_VERSION ; 00,04,00,00, \ ; ; PRIORITY ; 00,00,00,00, \ ; ; I/O Resource Descriptor 1 - COM4 port (0x02E8) ; 24,00,00,00, \ ;Total length of I/O Resource Descriptor 02,00,00,00, \ ;ResType_IO=0x00000002 01,00, \ ;IOD_Count 0C,00, \ ;IOD_Type 00,00, \ ;IOD_Alloc_Base 00,00, \ ;IOD_Alloc_End 00,00, \ ;IOD_DesFlags 00, \ ;IOD_Alloc_Alias 00, \ ;IOD_Alloc_Decode F8,FF, \ ;IOR_Align 08,00, \ ;IOR_nPorts E8,02, \ ;IOR_Min EF,02, \ ;IOR_Max 00,00, \ ;IOR_RangeFlags 00, \ ;IOR_Alias 00, \ ;IOR_Decode 00,00,00,00, \ ;PCCARD flags, 0x00 = 8-bit port ; ; IRQ Resource Descriptor ; 14,00,00,00, \ ;Total length of IRQ Resource Descriptor 04,00,00,00, \ ;ResType_IRQ = 0x00000004 00,00, \ ;IRQD_Flags 00,00, \ ;IRQD_Alloc_Num 08,00, \ ;IRQD_Req_Mask 00,00, \ ;IRQD_Reserved 20,00,00,00, \ ;PCCARD flags, 0x20 = Level mode interrupts ; ; REQUEST_CONFIG_PKT Descriptor ; 19,00,00,00, \ ;Length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ;ResType_Ignored_Bit+PCCARD_DEVICE_ID = 0x897C 00,00, \ ;Socket 02,00, \ ;Attributes 21, \ ;Vcc 21, \ ;Vpp1 21, \ ;Vpp2 02, \ ;IntType 00,80,00,00 \ ;ConfigBase 00, \ ;Status 00, \ ;Pin 00, \ ;Copy 07, \ ;Configuration Option Register 03, \ ;Present ; ; TERMINATOR ; 00,00,00,00 ;---------------- [Cnfg4] HKR,Override,0004,1, \ ; ; ; CONFIGMG_VERSION ; 00,04,00,00, \ ; ; PRIORITY ; 00,00,00,00, \ ; ; I/O Resource Descriptor 0 ; 24,00,00,00, \ ;Total length of I/O Resource Descriptor 02,00,00,00, \ ;ResType_IO=0x00000002 01,00, \ ;IOD_Count 0C,00, \ ;IOD_Type 00,00, \ ;IOD_Alloc_Base 00,00, \ ;IOD_Alloc_End 00,00, \ ;IOD_DesFlags 00, \ ;IOD_Alloc_Alias 00, \ ;IOD_Alloc_Decode E0,FF, \ ;IOR_Align 10,00, \ ;IOR_nPorts 00,00, \ ;IOR_Min FF,FF, \ ;IOR_Max 00,00, \ ;IOR_RangeFlags 00, \ ;IOR_Alias 1F, \ ;IOR_Decode 00,00,00,00, \ ;PCCARD flags, 0x00 = 8-bit port ; ; IRQ Resource Descriptor ; 14,00,00,00, \ ;Total length of IRQ Resource Descriptor 04,00,00,00, \ ;ResType_IRQ = 0x00000004 00,00, \ ;IRQD_Flags 00,00, \ ;IRQD_Alloc_Num FF,FF, \ ;IRQD_Req_Mask 00,00, \ ;IRQD_Reserved 20,00,00,00, \ ;PCCARD flags, 0x20 = Level mode interrupts ; ; REQUEST_CONFIG_PKT Descriptor ; 19,00,00,00, \ ;Length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ;ResType_Ignored_Bit+PCCARD_DEVICE_ID = 0x897C 00,00, \ ;Socket 02,00, \ ;Attributes 21, \ ;Vcc 21, \ ;Vpp1 21, \ ;Vpp2 02, \ ;IntType 00,80,00,00 \ ;ConfigBase 00, \ ;Status 00, \ ;Pin 00, \ ;Copy 07, \ ;Configuration Option Register 03, \ ;Present ; ; TERMINATOR ; 00,00,00,00 ; ;------------------------------------------------------------------------ [2P.RegHW] HKR,Child0000,HardwareID,,MF\IBRIDGE_IB3000_MODEM HKR,Child0000,ResourceMap,1,00,01 [Common.Reg] HKR,,DevLoader,,*CONFIGMG HKR,,Enumerator,,*CONFIGMG [Strings] Netac="Netac Technology CO., LTD." MFClassName="MultiFunction Adaptor" MFCName="(MultiFunction PC Card Parent Controller)" IB3000.DeviceDesc="Netac Wireless Modem A860"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.