When using the Notepad, to wrap text to the window size, click on Word Wrap from Format or Edit menu of the Notepad.
Notes: A check mark will appear when word wrap is turned on.
Wrapping text enables you to see all the text on the line, but it doesn't affect the way text appears when it is printed.
========================================================================================
ReadMe File for Muratec Doc Pilot (Printer Driver) and Remote Shuttle (Print Monitor)
========================================================================================
It is our pleasure to introduce Muratec Doc Pilot and Remote Shuttle.
Please read the following instructions for the software before installation.
************************************************************
CONTENTS
************************************************************
I. READ BEFORE INSTALLATION
SOFTWARE LICENSE
II. PRODUCT INTRODUCTION
PURPOSE OF THIS README FILE
WHO NEEDS THIS SOFTWARE?
OVERVIEW OF THE SOFTWARE COMPONENTS
Software Components
Printer Driver
Print Monitor
III. INSTALLATION/UNINSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION
UNINSTALLER/UNINSTALLATION INSTRUCTION
IV. HINTS
EXTRA CHARACTER IS PRINTED
LPT1 WRITE ERROR
CAN NOT PRINT SOME GRAPHICS OR SOME CHARACTERS CORRECTLY
V. TRADEMARK NOTICES
************************************************************
I. READ BEFORE INSTALLATION
************************************************************
============================================================
SOFTWARE LICENSE
============================================================
1. Any and all copyright and any other intellectual property regarding the Software remain solely the property of Destiny Technology Corporation (hereinafter "Destiny") and Murata.
2. You may use the Software only in the country of your purchase and only for the purpose of using the hardware of Murata and other companies approved by Murata (hereinafter "OEM Companies").
3. You may use the Software only in compliance with notices and restrictions written in "User's Guide" and other documents contained in this package.
4. You must not modify, alter all or any part of the Software. You must not make any attempt to discover the source code of the Software by any method including reverse-engineering, de-compiling, or de-assembling.
5. You must not sell, transfer, rent, lease or sublicense the Software to any third party by transmitting the software via phone-line or network, or by copying the software to floppy disk, CD-ROM, magnetic data tape or any other media.
6. The software is subject to changes by Murata or Destiny in its specifications and program without any prior notice.
7. Before installing the software, you are supposed to take any and all procedures necessary to secure your records and data at your cost and responsibility, including making backup of your computer files. Neither Murata, Destiny, OEM Companies nor their distributors/sub-distributors shall be liable for any damage or loss caused by your failure of taking the foregoing procedure.
8. Neither Murata, Destiny, OEM Companies nor their distributors/sub-distributors shall be liable for any damage or loss caused by (1) use of the software in combination with the hardware other than the hardware which is defined in Section 2 above or (2) modification of the software.
9. Neither Murata, Destiny, OEM Companies nor their distributors/sub-distributors shall assume any damages incurred by you or a third party even if such damage is directly/indirectly caused by use of the software or incapability to use the software.
************************************************************
II. PRODUCT INTRODUCTION
************************************************************
============================================================
PURPOSE OF THIS README FILE
============================================================
This ReadMe file provides specific installation instructions, precautions, restrictions and other information of Doc Pilot (Printer Driver) and Remote Shuttle (Print Monitor) you should know before you install and use them. Installation instructions are provided for the following operating systems:
* Windows(R) XP
* Windows(R) 2000
* Windows NT(R) 4.0 (Intel)
* Windows(R) Me
* Windows(R) 98
* Windows(R) 95
For the detailed information, refer to the online help included in each software component and the printer user's guide.
============================================================
WHO NEEDS THIS SOFTWARE ?
============================================================
This Printer Driver (Doc Pilot) enable to operate printer function either in local and network connected environment.
For installation, local workstation user needs the installation CD-ROM (Printer Driver/Print Monitor Setup Disc). Network clients can also install it from the network directory, in which the contents of software are copied.
============================================================
OVERVIEW OF THE SOFTWARE COMPONENTS
============================================================
This software is compatible with PC/AT compatible machines.
It can be installed in the following operating systems:
* Windows(R) XP
* Windows(R) 2000
* Windows NT(R) 4.0 (Intel)
* Windows(R) Me
* Windows(R) 98
* Windows(R) 95
To use this software, the optional PS Upgrade Chip should be attached to your machine.
For more information about Printer Driver and Print Monitor, refer to the associated online help.
------------------------------------------------------------
Software Components
------------------------------------------------------------
This software is composed with the Printer Driver (Doc Pilot PostScript 2) and the Print Monitor (Remote Shuttle for PostScript 2).
------------------------------------------------------------
Printer Driver (Doc Pilot PostScript 2)
------------------------------------------------------------
Printer Driver is a software program that enables your application software to access your printer's features.
Generally, you should install a printer driver supporting your printer and its printing language.
This software includes the following printer drivers.
* PostScript 2 Printer Driver
Refer to the printer driver help files for instructions on using specific printing features.
------------------------------------------------------------
Print Monitor (Remote Shuttle for PostScript 2)
------------------------------------------------------------
This software also includes Print Monitor (Remote Shuttle for PostScript 2).
Using Print Monitor system, you can recognize the status of the printer via parallel port, such as ready, paper jam and so on, and also can get and set the default value of the printer parameters from your PC easily and in time.
If you are not using bi-directional communication support machine, this function might not work properly.
*** NOTE ***
This function can not be used via USB-Parallel cable.
************************************************************
III. INSTALLATION/UNINSTALLATION INSTRUCTION
************************************************************
============================================================
INSTALLATION INSTRUCTION
============================================================
The installer provides two installation options.
* Installation from Setup.exe
By using Setup.exe file, you can install all or custom selected printer software into your target system. If you use the printer on the local workstation, we recommend you to use this method.
* Installation from Add Printer Wizard(*.inf) in System Printer folder
By using Add Printer Wizard, you can select and install an objective driver into your system. If you use the printer on the network, we recommend you to use this method.
------------------------------------------------------------
Installation from Setup.exe
------------------------------------------------------------
Use the installation CD-ROM (Printer Driver/Print Monitor Setup Disc), or network clients can also install it from the network directory, in which the contents of software are copied.
*** Windows(R) 95/ Windows(R) 98/ Windows(R) Me/ Windows NT(R) 4.0/ Windows(R) 2000 ***
1. Make sure that the cable between your machine and your computer is securely connected.
2. If you open the applications, close all applications. Turn off virus checkers and Terminate Stay Resident (TSR) programs. After installation, these programs can be turned back on.
If your machine and/or computer are turn off, turn on the machine and the computer.
*** NOTE ***
If the "add New Hardware Wizard" or "Found New Hardware Wizard" appears, Do NOT use the wizard. Click "Cancel" to close it.
3. Insert the Muratec printers drivers CD into the CD-ROM driver.
4. Click "Run" from the Start menu.
5. Browse to the Setup directory on the CD-ROM drive.
6. Select the "Setup.exe" file, click "OK".
7. The "Doc Pilot PostScript 2 setup" dialog box will appears. Click "Next".
8. Read the Software Licement Agreement carefully and, if you agree, click "Yes".
*** NOTE ***
To cancel the setup, click "No".
9. Click "Local", then "Next".
10. Select port, then "Next". (Usally select LPT1 port.)
11. Follw the instruction that appears on screen.
*** NOTE ***
If the notice of "Microsoft Digital Signature" appears, click "Yes".
12. Click "Finish" to complete the installation.
*** Windows(R) XP ***
1. Make sure that the cable between your machine and your computer is securely connected.
2. If you open the applications, close all applications. Turn off virus checkers and Terminate Stay Resident (TSR) programs. After installation, these programs can be turned back on.
If your machine and/or computer are turn off, turn on the machine and the computer.
*** NOTE ***
If the "Found New Hardware Wizard" appears, Do NOT use the wizard. Click "Cancel" to close it.
3. Insert the Muratec printers drivers CD into the CD-ROM driver.
4. Click "Run" from the Start menu.
5. Browse to the Setup directory on the CD-ROM drive.
6. Select the "Setup.exe" file, click "OK".
7. The "Doc Pilot PostScript 2 setup" dialog box will appears. Click "Next".
8. Read the Software Licement Agreement carefully and, if you agree, click "Yes".
*** NOTE ***
To cancel the setup, click "No".
9. Click "Local", then "Next".
10. Select port, then "Next". (Usally select LPT1 port.)
11. Follw the instruction that appears on screen.
*** NOTE ***
If the notice of Windows Logo Testing appears, click "Continue Anyway".
12. Click "Finish".
13. Restart your computer.
The "Found New Hardware Wizard" appears again.
14. Select "Install from a list or specific location (Advanced)" and thenclick "Next".
15. Check "Show compatible hardware".
16. Select "Doc Pilot PostScript 2" in the Printers area, then click "Next".
17. If the notice of Window Logo Testing appears, click "Continue Anyway".
18. When prompted the "DPCEPS.DLL" file, click "Browse" to navigate to your CD-ROM drive:
\printer\ps\winxp\ps2\(dpceps.dll)
19. Click "Open".
20. Click "OK".
21. Click "Finish" to complete the installation.
------------------------------------------------------------
Installation from Add Printer Wizard (only Printer Driver)
------------------------------------------------------------
1. Close all applications. Turn off virus checkers and Terminate Stay Resident (TSR) programs. After installation, these programs can be turned back on.
2. Click on "Start", "Settings" and "Printers". (In Windows XP, click "Printers and Faxes")
3. Double click on "Add Printer". (In Windows XP, click "Add a printer")
4. Answer the questions in the Add Printer Wizard until you reach the screen with the printer manufacturer list.
5. Click on "Have Disk".
6. Browse to the driver location using CD-ROM option and find the appropriate directory for your operating system.
7. Select "*.inf" file from PS2 or SETUP directory. Normally, select from PS2 directory.
8. Click "Open" and "OK".
9. Select the appropriate printer (PS Driver).
10. Follow the remaining instructions to complete the printer installation. At this point, the driver will be copied to your hard disk and added to the list of installed printers.
*** NOTE ***
Administrator privileges are required to install the software onto a Windows NT(R) 4.0 system, a Windows(R) 2000 system and a Windows(R) XP system.
============================================================
UNINSTALLER/UNINSTALLATION INSTRUCTION
============================================================
This software contains Uninstaller.
When you installed the software using Setup.exe, you can use the Uninstall icon in the Doc Pilot program group and remove all of the software for Printer Driver and Print Monitor.
*** NOTE ***
No Uninstaller is available when driver is installed from "Add Printers".
Administrator privileges are required to uninstall the software onto a Windows NT(R) 4.0 system, a Windows(R) 2000 system and a Windows(R) XP system.
1. In Doc Pilot Program Group, click the Uninstall icon. Or in the "Add/Remove application" property of Control Panel in Windows 95/98/Me, Windows NT(R) 4.0, Windows(R) 2000 and Windows(R) XP click "Doc Pilot PostScript 2".
2. Click "Yes" when uninstall program ask a confirm question.
3. Follow the prompts.
*** NOTE ***
After you uninstalled the software onto a Windows(R) 95/98/Me by the Uninstall icon, use the installation CD-ROM and install software by using the "Setup.exe" file under the Setup directory.
************************************************************
IV. HINTS
************************************************************
For the detail of using printer, please refer to the online help or user manual.
============================================================
EXTRA CHARACTER IS PRINTED
============================================================
If you encounter this problem, please try the following ways.
1. If you run Print Monitor and/or Printer Control Panel, please quit these programs, and try again.
2. If your PC printer port is set to ECP mode, change to Nibble mode. (only for Windows95/98/Me )
============================================================
LPT1 WRITE ERROR
============================================================
If you encounter this problem, please try the following ways.
1. Check printer is ON.
2. If you run Print Monitor or Printer Control Panel, please quit these programs, and try again.
3. If your PC printer port is set to ECP mode, change to Nibble mode. (only for Windows(R) 95/98/Me )
============================================================
CAN NOT PRINT SOME GRAPHICS OR SOME CHARACTERS CORRECTLY
============================================================
If you encounter this problem, please try the following ways.
----------------------------------------
In Windows(R) 95/98/Me
----------------------------------------
1. Set TrueType Mode setting on the Fonts tab of the Printer Driver to "Send Fonts as Bitmaps" or "Send Fonts as Outlines".
2. If your PC printer port is set to ECP mode, change to Nibble mode. (only for Windows(R) 95/98/Me )
----------------------------------------
In Windows NT(R) 4.0/Windows(R) 2000/XP
----------------------------------------
1. Set TrueType Mode setting on the Fonts tab of the Printer Driver to "Send Fonts as Bitmaps" or "Send Fonts as Outlines".
============================================================
PRINTING FUNCTION
============================================================
When printing a PDF data using the PostScript 2 Printer Driver, the functions "FitToPage","Combine" and "WaterMark"may not work.
To use these functions, please use the PCL Printer Driver instead of the PostScript 2 Printer Driver.
============================================================
USB-PARALLEL PRINTER CABLE
============================================================
When you use the PostScript driver with a USB-Parallel printer cable, set the "Local PS Print" to "On" and select "Windows" as "PC Type" on your machine.
For the detailed information of the "Local PS Print setting" and "Connecting the machine to the computer", refer to the printer user's guide.
We have tested the following USB-Parallel cables:
* USB PRINTER CABLE (PRC01-USB) Arvel, Corp.
* USB PRINTER CABLE (CG-UPRCBL) Corega, Corp.
* USB to Parallel Printer Cable (USB Type A Connector) MANHATTAN (R)
* USB Parallel Printer Adapter (P53590-B) Belkin Components, Ltd.
* USB to Parallel (DSB-P36) D-Link, Corp.
* USB-PARALLEL PRINTER CABLE (UCP-02) Justy, Corp.
************************************************************
V. TRADEMARK NOTICES
************************************************************
Windows, and Microsoft Windows are registered trademarks of Microsoft Corp.
TrueType is a registered trademark of Apple Computer, Inc.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.