Cherry GmBH SmartBoardXX33 drivers disk for Windows 2000 Professional.
Version 1.0.0.3, May 2002.
Caution:
--------
This readme file is specifically written for the above-mentioned
driver version. Before proceeding, you might want to check whether a
later driver version is available from www.cherry.de
Contents:
---------
1. Release notes
2. Pre-Requisites
3. Disk Content
4. Smart Card Interface driver use
5. User notes (Known deviations)
6. Troubleshooting
7. Support
1. Release notes
----------------
Version 1.0.0.3:
This is the initial driver version certified by Microsoft.
It is specifically designed for the
Cherry GmBH SmartBoardXX33,
Vid=046A and PID=0005 with Gemcore 2000 chip set.
2. Pre-Requisites
-----------------
To be able to conduct the following action, you need to have
Administrator privilege on the workstation.
To be usable, this installation requires that the Microsoft Smart Card
Manager is started.
Note: All Microsoft Smart Card Manager components are already
installed with Windows 2000.
DO NOT INSTALL THE SCBASE.EXE OR SMCLIB.EXE COMPONENTS even though
they might be part of this distribution.
To check the status of the Microsoft Smart Card Manager:
* Start the Computer Management Console by right-clicking on the
"My Computer" desktop icon and pick the "Manage" item in the menu,
* Select and open the "Services and Application" group in the list,
* Click on the "Services" item,
* Double-click on the "Smart Card" service.
* The service status should be "Started" and the StartUp Type should
be "Automatic"
If this is not the case,
* Choose "Automatic" in the "Startup Type" drop-down list, then
* Click on <Apply> button to start the service.
You can now close the Computer Management Console.
In the rest of this file, we assume that you know how to start the
Device Manager. To do so:
* Right-click on the "My Computer" desktop icon and pick the
"Properties" item in the menu.
* Select the "Hardware" tab and click on the "Device Manager..."
button
3. Disk Content
---------------
The following components are included with this Disk:
- Readme.txt V1.0.0.3
This file.
- CHSBXX33.Sys V1.0.0.3
PC/SC driver for SmartBoardXX33
- CHSBXX33.inf V1.0.0.3
Installation file for Microsoft Wizard
- CHSBXX33.Cat
Signature File from MS Windows Hardware Quality Labs
4. Smart Card Interface driver use
-----------------------------------
4.1. Driver installation
This USB device is Plug and play; you can plug it at any moment.
4.1.1. Installation
The first time the device is pluged, you will see a "New
Hardware Detected" dialog box,
Click <Next>,
Select "Search for a suitable driver for your device
(recommended)"
Then click <Next>.
Check the box to "Specify a location" then click <Next>.
Browse to the driver file location (where you find this
ReadMe.txt file) and click <OK>
Click <OK> one more time to close the "Insert the
manufacturer's installation disk ..."
The wizard will found a driver for the device
Click <Next>
The required files are copied to your computer and the
device is properly configured.
Click <Finish> to close the Hardware Wizard.
Note: the system could continue to install some others
drivers related to other part of your composite device.
4.1.2. Check your installation
Right-Click on "My Computer" icon on the desktop,
Choose "Manage" and select the "Device Manager" section,
Double-click on "Smart Card Readers" group,
Double-click on "SmartBoardXX33"
Select the "Driver" tab
Check that the "Driver version" matches the on for this file.
4.2. Driver update
4.2.1. Update
Right-Click on "My Computer" icon on the desktop,
Choose "Manage" and select the "Device Manager" section,
Double-click on "Smart Card Readers" group,
Double-click on "SmartBoardXX33"
Select the "Driver" tab
Click on <Update Driver>
Click <Next>, on Upgrade Driver Wizard dialog windows,
Select "Display a list of the known drivers for this device
so that I can choose a specific driver", and click <Next>
Click <Have Disk...>
Browse to the driver files location (where you find this
ReaMe.txt file) and click <Open>
Then click <OK>
Select "SmartBoardXX33", and click <Next>
The Wizard is ready to install the driver, click <Next>.
Click <Finish> to close the Microsoft Device Driver Wizard.
The driver is now updated and you can close the the "USB
Kbd Smart car reader properties" windows and "Computer
Management" windows.
4.2.2. Check your update
Right-Click on "My Computer" icon on the desktop,
Choose "Manage" and select the "Device Manager" section,
Double-click on "Smart Card Readers" group,
Double-click on "SmartBoardXX33"
Select the "Driver" tab
Check that the "Driver version" matches the on for this file.
4.3. Driver removal
4.3.1. Remove
Right-Click on "My Computer" icon on the desktop,
Choose "Manage" and select the "Device Manager" section,
Double-click on "Smart Card Readers" group,
Double-click on "SmartBoardXX33"
Select the "Driver" tab
Click on the <Uninstall> button.
When prompted, confirm the operation by clicking <OK>
When this operation is finished, just disconnect the device.
4.3.2. Check the removal
Right-Click on "My Computer" icon on the desktop,
Choose "Manage" and select the "Device Manager" section,
Either no more "SmartCardReader" group appears
no more reader is available on the computer
Or
Double-click on "SmartCardReader" group,
Verify that no "SmartBoardXX33" appears any
longer.
5 - User notes (known deviations)
---------------------------------
* If you change the USB port where the reader is connected, the system
may ask to provide source disk again! This happen only if the first
installation was done from a removal device like floppy disk or CD.
To resolve this issue, just copy the file on your local disk.
* After a successful uninstall, if you plug again the device, the system
keeps traces of previous installation. If you want to remove that,
you have to search in "%WINDIR%\inf" directory the files that begin
with oemXX.inf and oemXX.pnf.
Look for "SmartBoardXX33" in one of those oemXX.inf.
Then remove this file and the corresponding compiled oemxx.pnf.
6. Troubleshooting
-------------------
If the previously described procedure didn't succeed in installing or
updating the driver, please
1- Open the Device Manager,
Click on the "Smart card readers" group and
Check the state of the "SmartBoardXX33".
If a cross appears, or a Yellow bang "!", select the reader,
Click on property in the menu and
Check the box line "Disable in this material profile".
Then contact the support.
7. Support
----------
Visit the www.cherry.de web site or contact Cherry GmbH at
support@cherry.de
Tel: (49) 9643 18 206
Fax: (49) 9643 18 545
----------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.