10/100M Fast Ethernet PCMCIA Adapter Installation
for Client 32 for DOSWIN Users
This document contains 10/100M Fast Ethernet PCMCIA Adapter
installation notes for Client 32 for DOSWIN users.
This document contains information on the following topics:
******************************************************************
* Notes: *
* The PC Card should be enabled by Card services. *
* Please run ENFP16.EXE before starting Client 32 for *
* DOSWIN. *
* *
* Two alternatives to enable the *
* 10/100M Fast Ethernet PCMCIA Adapter: *
* *
* 1. Issue an executive file: *
* *
* At the DOS prompt, type: *
* *
* ENFP16 [/iop:XXX] [/irq:X] *
* *
* For more details, refer to INST_DOS.TXT. *
* *
* 2. Modify CONFIG.SYS *
* *
* Add the following instruction to CONFIG.SYS file *
* *
* DEVICE=<PATH>\ENFP16.EXE [/iop:XXX] [/irq:X] *
* *
* ; <PATH> is the directory containing ENFP16.EXE *
* ; Note: If EMM386.EXE is installed, make sure the *
* ; memory range is D000-D7FF. *
* ; Please refer to the INST_DOS.TXT file for details. *
******************************************************************
Sample Configuration Files:
---------------------------
STARTNET.BAT (Client 32 for DOS will contain):
SET NWLANGUAGE=English
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\FP16.LAN PORT=300 INT=3 FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\FP16.LAN PORT=300 INT=3 FRAME=Ethernet_802.3
LOAD C:\NOVELL\CLIENT32\FP16.LAN PORT=300 INT=3 FRAME=Ethernet_II
LOAD C:\NOVELL\CLIENT32\FP16.LAN PORT=300 INT=3 FRAME=Ethernet_SNAP
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
Note: the PORT and INT parameters should be set as the values
which are set by ENFP16.EXE.
A. Driver Installation Procedures on Clien32 for DOS :
------------------------------------------------------
1.If you have completed installing the Netware Client 32 for DOS, all
you have to do is to modify STARTNET.BAT. Please see the sample
STARTNET.BAT above. If not, Please follow the next step 2 - step 7.
2.Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or from
Netware 4.11 CD). When the product manual appears, mark the
"Netware Client 32 for DOS" item, then press <Enter>.
3.Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu,
then press <Enter>.
4.Insert 10/100M Fast Ethernet PCMCIA Adapter Driver Diskette,
then specify the driver path A:\NETWARE\CLIENT32
5.Select "10/100M Fast Ethernet PCMCIA Adapter Driver", then press
<Enter>.
6.Following instructions to complete the Client32 for DOS software
installation.
7.Reboot your machine.
B. Driver Installation Procedures on Client32 for Windows 3.x :
---------------------------------------------------------------
Refer to Content A. On step 2, mark "Netware Client 32 for DOS" and
"Client 32 for Windows". On step 4, specify the driver path like
A:\NETWARE\CLIENT32\FP16.LAN, then following step 3..7 to complete
the installation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.