Ethernet PCMCIA Adapter Installation
for Microsoft Network Client 3.0 for MS-DOS
Introduction
ÍÍÍÍÍÍÍÍÍÍÍÍ
This installation assumes that the PC Card devices are working
properly. Please consult INST_DOS.TXT for help with PC Card driver.
Getting Started will describe the installation instructions.
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
[Method 1]:
Please change to the Microsoft Network Client subdirectory
and run SETUP.EXE. (default directory is C:\NET)
Respond to the screen prompts, selecting "Change Network
Configuration", then press <Enter>.
Move the highlight to "Add driver for network Adapter",
press <Enter>.
Select "Network adapter not shown on list below ...".
Insert the driver diskette into the drive A or B.
Please specify the location of the driver
Ex: A:\NDIS2
Select "Add Protocol" as you want.
Follow screen instructions to complete the process. Simply
pressing <Enter> for each screen display will select the
default options. Press <Enter> until you reach the display
prompting you to reboot your system.
[Method 2]:
Execute SETUP.EXE from Microsoft Network Client for DOS
release diskette.
Specify the <target path> to which Microsoft Network Client for
DOS files will been copied.
Select "Network adapter not shown on list below ...".
Insert the driver diskette into the drive A or B.
Please specify the location of the driver
Ex: A:\NDIS2
Select "Ethernet PCMCIA Adapter".
Select "Change Network Configuration", "Add Protocol" as you
want.
Follow screen instructions to complete the process. Simply
pressing <Enter> for each screen display will select the
default options. Press <Enter> until you reach the display
prompting you to reboot your system.
Sample Configuration Files:
---------------------------
PROTOCOL.INI
[network.setup]
version=0x3110
netcard=EP16,1,EP16,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,MS$NETBEUI
lana0=EP16,1,ms$netbeui
lana1=EP16,1,ms$ndishlp
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=EP16
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=EP16
LANABASE=1
[EP16]
DriverName=EP16ND$
IOADDRESS=300
INTERRUPT=3
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.