**********************************************************************
INSTALLATION NOTES FOR ATTACHMATE ISCA SNA SERVER DRIVER
ATTACHMATE DISKETTE PART #: 244441.30
LAST MODIFIED: 6/24/97
**********************************************************************
FILE LIST: DCASYNC.SYS 62,976 06/16/97 11:02a
DCASDLC.INF 100,991 06-21-96 2:15p
DCASDLC.SRL 9,728 01-05-96 2:11a
DCASDLC.HLP 16,734 06/27/95 02:11a
DCAX25.SRL 10,752 11/18/96 01:38a
DCAX25.INF 98,649 11/18/96 01:38a
DCAX25.HLP 25,367 11/18/96 01:38a
README.TXT THIS FILE
**********************************************************************
This release supports:
- SNA Server 2.11 running on NT 3.51
- SNA Server 3.0 running on NT 4.0
- Fix of INT3 problem. (Fixed in earlier release)
- 3 ISCA Adapters in one SNA Server (Fixed in earlier release)
- Multiprocessor Machines (SMP) (Added in this release)
**********************************************************************
Note: In SNA Server 3.0 setup is performed in SNA Server Manager.
In SNA Server 2.11 setup is performed in SNA Server Setup.
**********************************************************************
Installation Procedure
**********************************************************************
1. Run SNA Server Manager.
Under the Tools menu, select External Link Services.
Using External Link Services, remove all DCA SDLC Link Services.
**********************************************************************
***** Skip steps 2-6 if you are using X.25 and not SDLC *****
**********************************************************************
2. Copy the provided DCASDLC.INF into SNA\SYSTEM\HWSETUP.
3. Copy the provided DCASDLC.SRL into SNA\SYSTEM\HWSETUP.
4. Copy the provided DCASDLC.HLP into SNA\SYSTEM\HWSETUP.
5. Create a directory DCASDLC (if it does not exist) under
\SNA\SYSTEM\HWSETUP.
6. Copy the provided DCASYNC.SYS into SNA\SYSTEM\HWSETUP\DCASDLC.
**********************************************************************
***** Skip steps 7-11 if you are NOT using X.25 *****
**********************************************************************
7. Copy the provided DCAX25.INF into SNA\SYSTEM\HWSETUP.
8. Copy the provided DCAX25.SRL into SNA\SYSTEM\HWSETUP.
9. Copy the provided DCAX25.HLP into SNA\SYSTEM\HWSETUP.
10. Create a directory DCAX25 (if it does not exist) under
\SNA\SYSTEM\HWSETUP.
11. Copy the provided DCASYNC.SYS into the SNA\SYSTEM\HWSETUP\DCAX25
directory.
**********************************************************************
12. If using SNA Server 3.0 or above, run SNA Server Manager to
re-install and configure the DCA SDLC Link service.
For SNA SERVER 2.11, run SNA Server Setup to re-install the DCA
SDLC Link service.
**********************************************************************
END OF FILE
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.