;*************************************************************************** ;* ;* Copyright (C) 1993 by NCR Corporation. ;* ;* This program contains proprietary and confidential information. ;* All rights reserved except as may be permitted by prior written consent. ;* ;*************************************************************************** $ 0 "Flash.Exe Version 5.1" $ 1 "(c) Copyright 1993 NCR Corporation." $ 2 "(3433/3434/3437/3432, 3350/3355, 3325, 3231/3227-II)" $ 6 "Yes" $ 7 "\n\nEnter Selection: " $ 10 "This utility will update the BIOS FEPROM currently" $ 11 "installed in your machine with a new version. This" $ 12 "new version must be a valid BIOS image. In order to" $ 13 "program the new version, perform the following steps." $ 14 " 1. Update the BIOS FEPROM (Option 1)" $ 15 " NOTE: This option will create a backup version of the current" $ 16 " BIOS image if the image has not already been saved." $ 17 " 2. Exit Flash.exe and run the Reference Disk." $ 18 " " $ 19 "If any problems occur, restore the old copy of BIOS" $ 20 "by using the steps outlined above. Do not turn off" $ 21 "your machine until the BIOS is successfully programmed!" ; Must have at least one open number after last one here (nullptr). $ 30 "To specify a filename, type the name of the file after" $ 31 "the displayed pathname. The path shown is the current" $ 32 "directory and may be modified by using the backspace" $ 33 "key." $ 34 " " $ 35 "Pressing the F2 key will display a list of files in the" $ 36 "current directory that are 128KB in size. Use the cursor" $ 37 "keys to highlight the desired file and then press ENTER" $ 38 "to select it. The ESC key will abort the file selection." $ 39 " " ; Must have at least one open number after last one here (nullptr). $ 50 "Press F1 for help" $ 51 "1. Update Current BIOS FEPROM" $ 52 "2. Backup Current BIOS FEPROM" $ 53 "X. Exit" $ 54 "Press any key to continue" $ 55 "Help Screen" $ 57 "ERROR" $ 58 "Wildcard characters not allowed" $ 59 "Invalid path" $ 60 "No files found" $ 61 "Error searching for files" $ 62 "Select file and press ENTER. (ESC to exit)" $ 63 "Press F2 for a list of files " $ 64 "Now reading file" $ 65 "Checksum on requested file is invalid" $ 66 "The requested file is not a valid BIOS file" $ 67 " " $ 68 "Read BIOS files from disk" $ 69 "Please insert a diskette containing the BIOS file (into A:)" $ 70 "Enter filename: " $ 71 "No such file or directory" $ 72 "Error reading file" $ 73 " or" $ 74 "Not a BIOS image for this computer" $ 75 "BIOS image successfully read" $ 76 "Error: Disk Full" $ 77 "File already exists" $ 78 "Saving current BIOS contents to %s" $ 79 "Error writing to file" $ 80 "Backup complete" $ 81 "Please insert a diskette to contain the BIOS file (into A:)" $ 82 "Update BIOS FEPROM" $ 83 "No BIOS image has been read" $ 84 "This will overwrite the contents of the BIOS FEPROM" $ 85 "Are you sure? (Yes/No)" $ 86 "If any problems occur, your old BIOS will be" $ 87 "restored from the backup file before exiting the program" $ 88 "Do you wish to continue? (Yes/No)" $ 89 "Enter filename for backup copy of current BIOS" $ 90 "Current BIOS contents have already been saved" $ 91 "Bypassing the backup process" $ 92 "Warning: Do not turn off power during this operation." $ 93 "BIOS Update Complete, exit FLASH and run the Reference Disk." $ 94 " " $ 95 " Note:" $ 96 " CMOS has been cleared. The Reference Disk" $ 97 " will interpret this as a checksum error." $ 98 "Error programming BIOS FEPROM" $ 99 "Now attempting to restore saved" $ 100 "version of FEPROM" $ 101 "BIOS FEPROM could not be restored!" $ 102 "Contact your NCR Customer Service" $ 103 "Representative!" $ 104 "Backup file could not be read!" $ 105 "Please try again!" $ 106 "Backup BIOS FEPROM" $ 107 "Enter filename for saved BIOS" $ 110 "Usage: FLASH [/h | /f filename]" $ 111 " /h Display this help menu." $ 112 " /f filename Update the BIOS with 'filename'. If 'filename' is not a" $ 113 " valid BIOS image for your machine, the update will be aborted." $ 114 " A reboot will occur immediately following the BIOS update." $ 115 "Note: The options below are only recommended to be used with the guidance" $ 116 "of NCR technical support. These options are to be used with the /f" $ 117 "option above." $ 118 " /a Always update the BIOS with 'filename'. FLASH.EXE doesn't" $ 119 " ensure that 'filename' is valid for your computer." $ 120 " /n Do NOT clear CMOS. This means the Reference Disk SETUP.EXE" $ 121 " utility does not need to be executed. WARNING: Often" $ 122 " Setup needs to be run after updating the BIOS, so use" $ 123 " this option with caution." $ 124 " /i Ignore the class of machine. Normally FLASH.EXE will only" $ 125 " run on the classes of computers listed above." $ 126 " This option will allow it to be executed on other computers" $ 127 " to view FLASH.EXE's menus. This can NOT be used to update the" $ 128 " BIOS on other computers." ; Must have at least one open number after last one here (nullptr). $ 130 "CMOS will not be cleared!" $ 131 "This version of FLASH.EXE is not valid for your computer!" $ 132 "Use the FLASH.EXE from the appropriate Reference/BIOS diskette" $ 133 "for your computer." $ 134 "Flash FEPROM Programming Utility" $ 135 "Shadow RAM not enabled!\n" $ 136 "Please enable Shadow RAM using the Reference Disk\n" $ 137 "before using this program.\n" $ 138 "Unable to allocate enough memory to process data files\n" $ 139 "Please remove any RAM resident programs or drivers\n" $ 140 "Error in updating the BIOS!\n" $ 141 "is either corrupt, not found, or" $ 142 "not for this class machine!" $ 150 "Flash Memory Erase Failure" $ 151 "Flash Memory Program Failure" $ 152 "Current address: %X%04X" $ 153 "Now programming EPROMs with 00h" ; 153 and 154 must $ 154 "Now erasing EPROMs " ; be the same length $ 155 "Now programming with new BIOS version" $ 156 "Warning: Do not interrupt programming sequence." ;========================================================= ; 3231 Specific messages (Since 3231 is not Micro Channel) ;========================================================= $ 160 " " $ 161 "This utility will update the BIOS FEPROM currently" $ 162 "installed in your machine with a new version. This" $ 163 "new version must be a valid BIOS image." $ 164 " " $ 165 "Do not turn off your machine until the BIOS is" $ 166 "successfully programmed!" $ 167 " " ; Must have at least one open number after last one here (nullptr). $ 180 "BIOS Update Complete!" $ 181 " Note:" $ 182 " CMOS has been cleared. The BIOS will" $ 183 " interpret this as a checksum error." $ 185 "This version of FLASH.EXE is not valid for your computer!" $ 190 "Shadow RAM not enabled!\n" $ 191 "Please enable 'System BIOS Shadow'\n" $ 192 "before using this program.\n"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.