Additional Information
MDP3858V-U Data+Fax+Voice Modem Card Ver 0.20
Installation on Win 95 Platform
================================
1. Win95 will automatically detect the MDP3858V-U PnP Modem Card
and displays the "New Hardware Found" dialog box.
2. Insert the installation diskette provided into either drive
A or B.
3. Select the "Driver from disk provided by Hardware manufacturer
option and click OK.
4. Type A:\ (or B:\) in the combo box and click OK.
You might encounter some resource conflicts after loading the PnP modem
device (especially when there are non-Plug & Play adaptors installed in
your system). To alter the resource configurations, go to Control Panel
- System - Device Manager and click on "Modem". Choose the modem device
and click on "Properties". You can change the settings for both Com Port.
For further details, please refer to Trouble-shooting section in Windows 95.
Installation on Win 95/OSR2 Platform
=====================================
1. Win95 will automatically detect the MDP3858V-U PnP Modem Card after
which the system will prompt the "Update Device Driver Wizard"
dialog box.
2. Insert the installation diskette provided into either drive
A or B.
3. Click "Next" to let system search for an updated driver.
4. Click "Finish" to use the found driver.
5. Click "Ok" when prompted to insert the installation disk.
6. Change path to A:\ (or B:\) and click OK.
7. System will then automatically load all the necessary drivers and
files needed.
You might encounter some resource conflicts after loading the PnP
modem device (especially when there are non-Plug & Play adaptors installed
in your system). Please refer to Trouble-shooting section in Windows 95 for
further details.
Modem AT Command Set
====================
The AT Command Instructions Set for the Modem hardware is now available
in Microsoft Word format (ATCOMSET.DOC). It is available in the software
diskette provided from manufacturer and Windows root directory.
Things to Note :-
=================
1. MDP3858V-U can be set up on both WIN95 and WIN95(OSR2) but no support
on WIN3.x and DOS platform.
2. Windows Dos Terminal Emulation is not supported as yet. Applications
like Telix and NC Terminal Mode cannot be run in WIN95 Dos Emulation
Box. Please do not check the DOS Emulation box.
3. Voice is supported in Answering Machine Feature.
4. Voice and SpeakerPhone is supported when a sound card is installed
with proper interface connected to the modem.
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* MDP3858V-U Modem Card *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.