README file for
devolo MicroLink dLAN Audio firmware, v.1.1.0.16
25.02.2005
-----------------------------------------------------------------------
Contents
1. Overview
2. Content
-----------------------------------------------------------------------
1. Overview
This file contains information about the firmware for the
MicroLink dLAN Audio.
-----------------------------------------------------------------------
2. Content
This directory contains the following files:
README.TXT This file
ML-DLAN-AUDIO-1-1-0-16.bin Firmware file
-----------------------------------------------------------------------
3. Installation
Proceed as follows to update your MicroLink dLAN Audio firmware:
Copy the firmware file onto the hard disk of the computer that
is to be used to update the MicroLink dLAN Audio firmware. On
this computer, open the configuration page of the MicroLink dLAN
Audio by selecting "MicroLink Informer" -> "Device" -> "Control
device". The MicroLink dLAN Audio configuration page will be displayed;
change to the “Firmware” area. Now click on the button “Browse”
and mark the firmware file “ML-DLAN-AUDIO-1-1-0-16.bin” and
confirm with “Open”. You can then start the firmware upgrade
with the button “Upload firmware”. Please do not repeatedly press
the “Upload” button; the upgrade takes about 1 minute. The
MicroLink dLAN Audio restarts automatically after a successful
upgrade.
!!Important notice!!
While the firmware upgrade is in process, please ensure that you
do not interrupt the connection between the PC and the MicroLink
dLAN Audio, do not switch the PC off, and do not unplug the
MicroLink dLAN Audio from the power socket.
While the firmware upgrade is in process, the four channel LEDs
on the left side of the MicroLink dLAN Audio illuminate, as do
the “Power” and “Link” LEDs on the right-hand side. The “Act”
LED blinks rapidly.
-----------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.