1. dfw203a.exe Driver
2. FWREADME.TXT File Contents

FWREADME.TXT Driver File Contents (dfw203a.exe)

DISKFWMK.ZIP

st_hawk.bin   = Seagate Hawk firmware image (ST32430, ST32130)   ver 0712
st_hawk.tms   = Seagate Hawk servo image    (ST32430, ST32130)   ver 9570
st_2barr.bin  = Seagate 2GB Barracuda image (ST32550)            ver 0910
st_4barr.bin  = Seagate 4GB Barracuda image (ST15150)            ver 0908
st34371.img   = Seagate ST32171/ST34371 firmware image           ver 0512
st34572w.img  = Seagate ST34572W firmware image                  ver 0876
st19171.img   = Seagate 9GB image (ST19171)                      ver 0024
st19171d.img  = Seagate 9GB image (ST19171) debug ver            ver DB32
st34573w.img  = Seagate ST34573W firmware image                  ver 6609
st118273.img  = Seagate 18GB image (ST118273)                    ver 6609
st39173.img   = Seagate 9GB firmware image (ST39173)             ver 6621
st39173.tms   = Seagate 9GB servo image (ST39173)                ver 6015
st39173l.img  = Seagate 9GB firmware image (ST39173L)            ver 6632
st34520w.img  = Seagate 4.5G Medalist (ST39140 & ST34520)        ver 1498
st39140w.img  = Seagate 9GB Medalist (ST39140 & ST34520)         ver 1498
st39102.img   = Seagate 9GB 10K LVD firmware (ST39102)           ver 0005
bcq01423.img  = Conner 2/4GB firmware image (CFP2107, CFP4207)   ver 1423
tcmar195.img  = WangDAT Model 3400DX firmware image              ver 0195
att442e.fup   = DEC 2GB DSP3210S                              FW ver 442E
l4pl442.fup   = DEC 1GB DSP3107LS                             FW ver 442 
t392_ncr.fup  = DEC 1GB DSP3105S                              FW ver T392
imlst23f.bin  = IBM 2GB DFHSS2F & 4GB DFHSS4F drives          FW ver 3636
ibmfw.txt     = Special instructions for IBM drives 
tcmar195.img  = WangDAT Model 3400DX firmware image              ver 0195

fwhdr.exe     = DISKFW3 firmware header utility
dl.exe        = DISKFW3 download program  ver 2.01
dwnldus.hlp   = DISKFW3 text messages and firmware filenames

You can also get raw Seagate firmware images from 
  http://www3.ncr.com/support/nt/devices/disks/seagfw.zip

If you need an image from the list above, but it is not currently on
the DISKFW3 diskette, skip to step 5 below.
Steps to make a DISKFW3-ready image from a raw firmware image:

1) Determine the model number of the disk(s) you are interested in.
   You can see this displayed during boot, or use a tool such as
   DOS DISKFW3 or NT SLIST to display it, if you are not sure.

2) See if the disk is a model that is contained in the 
   dwnldus.hlp file.  Entries have the form:
      <vendor>     e.g. "SEAGATE"
      <product>    e.g. "ST15150W"
      <filename>   e.g. "ST_4BARR.BIN"

3) If your model is in the dwnldus.hlp file, use the filename 
   there as the target image filename.
   Otherwise, use the following filename convention:
     [SCSI Product ID, 8 chars max].IMG   (e.g.: st34573w.img)

4) Run the following command:
   FWHDR <raw image filename> <vendor> <product> <rev>
   The fwhdr program will prepend a header to the image, and name
   the output file after the input filename, with the suffix ".img".  
   Rename the output file to the target image filename determined 
   above in step 3.

5) Now copy the new *.img file to the diskette.
   You may have to delete other firmware images to allow enough space.

Note that to get disk firmware for NCR Symbios RAID devices, you should 
go to ftp://diskt1.sandiegoca.ncr.com/pub/released/drive/.  

--------
To add an entry to the table in dwnldus.hlp, add lines to the table 
in dwnldus.hlp with the following information:
  <vendor>   e.g. "SEAGATE"
  <product>  e.g. "ST39173W"
  <filename> e.g. "ST39173.IMG"
Then "copy /b dl.exe+dwnldus.hlp download.exe" to update the program.
and copy the resulting download.exe and new image to the diskette.