3Com Corporation
EtherDisk Diskette for the EtherLink II Adapters
System Resources
Listed below are commonly used peripherals and their option settings. If any
of these peripherals are installed in your computer, check which resources
they are using and make sure that the software options on the EtherLink II
adapters are not set to use the same resources. Other peripherals not
mentioned in these lists could also cause conflicts.
I/O Base Address Device
---------------- ------
200 Game I/O adapter
270 LPT2: second parallel port
2F0 COM2: second serial port
320 Fixed disk adapter
370 LPT1: primary parallel port
380 Monochrome display adapter
3C0 Enhanced graphics adapter
3D0 Color graphics adapter
Interrupt Level Device
--------------- ------
IRQ3 COM2
IRQ4 COM1
IRQ5 LPT2
IRQ7 LPT1
Memory Usage
------------
Address Device
C0000-C3FFF EGA BIOS
C0000-C8000 Normal VGA area
C8000-CBFFF Hard disk adapter BIOS
D0000-DFFFF EMS swap area (page frame)
(%VER System Resources v3.4b)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.