MTD80X.DST for SCO Unix 5.x
Asound Technology Inc.
Installation:
1. login as root user (on maintenance mode).
2. use "custom" utility to install the mtd80x SCO 5.x software package.
2.1 doscp a:/<path>/mtd80x.dst /tmp/VOL.000.000.
2.2 execute "custom" utility,
2.3 select "Software" item in the "Software Manager (custom) on
hostname" window to get into pull down menu,
move to "Install New...", then press [Enter] buttom,
2.4 |------------ Begin Installation on hostname -----------|
| |
| What host (machine) do youwant to install from? |
| --------------------------------------------------- |
| | <*> From hostname | |
| | < > Fraom another host | |
| --------------------------------------------------- |
| |
|-------------------------------------------------------|
| [Continue] [Cancel] [Help] |
|-------------------------------------------------------|
select from hostname and press [Continue] buttom,
2.5 |--------------------------- Select Media ---------------------------|
| |
| Insert media, and select media device. |
| |
||---------------------------------------------------------| |
||Media Device:|| Floppy Disk Driver 0 __________________|v| |
||---------------------------------------------------------| |
| ||------------------------------------------| |
| || Floppy Disk Driver 0 | | |
| -------------|| SCSI CD-ROM Driver 0 | |---------|
| [Continue] || *Media Images | | [Help] |
|--------------------------------------------------------------------|
press [] to get into pull down menu, select "Media Images" and
press [Continue] buttom,
2.6 |---------------------- Enter Image Directory -------------------------|
| |
|Enter the full path to the directory containing media images. |
| |
|Image Directory: | /tmp_______________________________________________|
| |
|Note: media images must follow the naming convention VOL.000.000, etc.|
|----------------------------------------------------------------------|
|[OK] [Cancel] [Help]|
|----------------------------------------------------------------------|
input the path name where VOL.000.000 is located,
and press [OK] buttom,
2.7 |---------------------- Enter Image Directory --------------------------|
| |
| Installing: Asound MTD80X Based Ethernet Network Drivers(version 1.0.0)|
| Do you want a FULL or PARTIAL installation? |
| |
|-----------------------------------------------------------------------|
|[FULL] [Partial] [Cancel] [Help] |
|-----------------------------------------------------------------------|
press [FULL] buttom, and wait for the following message is displayed:
|----------- Question ------------|
| Installation Complete |
|---------------------------------|
| [OK] |
|---------------------------------|
2.8 press [Enter] buttom then you will find out that
"Asound MTD80X Based Ethernet Network Drivers"
is added to the package list.
3. use "netconfig" utility to install the driver.
3.1 select "Hardware" item from the "Network Configuration Manager" window
to get into pull down menu, move to "Add new LAN adapter",
then press [Enter] buttom,
3.2 |------------------------ Add new LAN adapter -----------------------|
| Select network adapter to be added: |
| ------------------------------------------------------------------ |
| |* 3COM EtherLink 16/16TP Adapter | |
| | . | |
| | . | |
| | . | |
| | . | |
| | . | |
| | . | |
| | . | |
| | Asound MTD80x Based 100M/10M PCI Network Adapter | |
| -----------------------------------------------------------------| |
|--------------------------------------------------------------------|
| [Continue] [Cancel] [Help] |
|--------------------------------------------------------------------|
use [] key to move to "Asound MTD80x Based 100M/10M PCI Network Adapter"
and then press [Continue] buttom,
3.3 |-------------------- Network Driver Configuration -----------------------------|
| |
| Enter the configuration of Asound MTD80x Based 100M/10M PCI Network Adapter: |
| |
| -------------------------- [ Advanced |
| Device#: | |0___________________|v| Options ] |
| -------------------------- |
| * - indicates conflict with other hardware. |
|-------------------------------------------------------------------------------|
| [OK] [Cancel] [Help] |
|-------------------------------------------------------------------------------|
you can set the Device# to select some specified mtd80x card. if you
do not make sure this value, you do not change the value, continue the
installation, this driver will search PCI Ethernet card automatically.
when you finish the settings, press [OK] buttom,
3.4 |---------------------------- Information ---------------------------|
| |
| Please verify adapter is set to the configuration just entered. |
|--------------------------------------------------------------------|
| [OK] |
|--------------------------------------------------------------------|
press [Enter] buttom,
3.5 |--------------------------- Add protocol -------------------------- |
| Select one networking product to be added to |
| ------------------------------------------------------------------ |
| | HW Asound MTD80x Based 100M/10M PCI Network Adapter | |
| | * - SCO IPX/SPX | |
| | - SCO TCP/IP | |
| ------------------------------------------------------------------ |
|--------------------------------------------------------------------|
| [Add] [Cancel] [Help] |
|--------------------------------------------------------------------|
use [] key to move cursor to "SCO TCP/IP" then press [Add] buttom,
3.6 |-------------------- SCO TCP/IP Configuration ----------------------|
| |
| |
| |
| Local Host Name: | hostname_______________| [ Advanced ] |
| IP Address: | 172.10.10.10___________| Options... |
| Netmask: | 255.0.0.0______________| |
| Broadcast Address: | 10.255.255.255_________| |
| Domain Name: | hostname.com___________| |
| TCP connections: | 256 ___________________| |
| Pseudo ttys: | 32_____________________| |
| |
|--------------------------------------------------------------------|
| [OK] [Cancel] [Help] |
|--------------------------------------------------------------------|
input the related information then press [OK] buttom,
3.7 |------------------------------ Message -----------------------------|
| The following products were successfully configured into the system|
| SCO TCP/IP | |
| Asound MTD80x Based 100M/10M PCI Network Adapter - Deivce #0 |
|--------------------------------------------------------------------|
| [ OK] [Help] |
|--------------------------------------------------------------------|
press [OK] buttom,
3.8 at "Hardware" item press [Enter] buttom to get into pull down menu
then move to "Exit" then press [Enter] buttom,
3.9 |--------------------------- Question ---------------------------|
| The Unix Kernel must be re-linked before the changed |
| ??? made here will have an effect. |
| Do you want to re-link the kernel now? |
|----------------------------------------------------------------|
| [ YES ] [Help] |
|----------------------------------------------------------------|
press [YES] buttom to relink to kernel,
3.10 Do you want this kernel to boot by default (y/n) y
3.11 Do you want to the kernel environment rebuilt (y/n) y
4. reboot this UNIX system.
#shutdown -y -g0
Use:
1. login as root user (on maintenance mode).
2. use "netconfig" utility to reconfigure the driver.
|--------------------- Network Configuration Manager --------------------|
| ---------------------------------------------------------------------- |
| | Hardware Protocol | |
| ---------------------------------------------------------------------- |
| Current networking configuration: |
| -----------------------------------------------------------------------|
| ---------------------------------------------------------------------- |
| | * HW SCO TCP/IP Loopback driver | |
| | SCO TCP/IP | |
| | - SCO NFS Runtime System | |
| | HW Asound MTD80x Based 100M/10M PCI Network Adapter - Device #0 | |
| | SCO TCP/IP | |
| | - SCO NFS Runtime System | |
| | | |
| | | |
| | | |
| ---------------------------------------------------------------------- |
| Current configuration of the networking software in this system |
|------------------------------------------------------------------------|
use [TAB] key to select "HW Asound MTD80x Based 100M/10M PCI Network Adapter- Device #0",
then select "Hardware" item to get into pull down menu, move to
"Modify hardware configuration", then press [Enter] buttom,
3. reboot this UNIX system.
#shutdown -y -g0
Histories of Release:
***) 1.00, 11-24-1999
First release.
***) 2.00, 06-13-2000
For MTD800, MTD803 and MTD891.
***) 2.20, 09-02-2000
Change the default value of burst length.
***) 2.30, 01-17-2001
Modify for fatal bus error issue.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.