ASOUND .O for Linux
Asound Technology Inc.
Installation:
1. copy the source code mtd80x.c to Linux,
2. compile the source code, the instruction for compiling the driver is
as follows:
#gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall
-Wstrict-prototypes -O6 -c mtd80x.c
3. insert the driver as module,
#insmod mtd80x.o
4. bind your card to an IP address
#ifconfig eth0 ${IPADDR} broadcast ${BROADCAST} netmask ${NETMASK}
5. add your card to IP routing table,
#route add -net ${NETWORK} netmask ${NETMADK} eth0
6. now, you should be able to ping local network.
Histories of Release:
***) 1.00, 12-17-1999
First release.
***) 2.00, 06-13-2000
For MTD800, MTD803 and MTD891.
***) 2.10, 07-26-2000
Verify this driver by MTD800+MTD981.
***) 2.20, 09-01-2000
Modify the default value of burst length.
***) 2.30, 12-08-2000
Modify display messages.
***) 2.50, 01-17-2001
Modify for fatal bus error issue.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.